From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gabriel C Date: Tue, 30 Dec 2008 14:28:49 +0000 Subject: Re: [lm-sensors] [RFC] Asus ATK0110 ACPI hwmon driver Message-Id: <495A3021.1020109@frugalware.org> List-Id: References: <20081229205537.GA11072@dreamland.darkstar.lan> In-Reply-To: <20081229205537.GA11072@dreamland.darkstar.lan> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: lm-sensors@vger.kernel.org Luca Tettamanti wrote: > On Tue, Dec 30, 2008 at 3:01 PM, Gabriel C wrote: >>> I'm once again submitting my driver for ASUS ATK0110 sensor interface, >>> re-based against kernel v2.6.28. Comments are welcome :) > [...] >> Your patch works fine on my motherboard , here is the output when loading the driver : > > yay :) > >> however do I need some patches against lmsensors 2.* / 3.* to make sensors display the data from the ATK driver ? > > Ah, yes: > http://thread.gmane.org/gmane.linux.drivers.sensors/18322 > > libsensors ignores the unknown 'acpi' bus. Ah right I remember now :) With the patch all seems fine , thx :) ... atk0110-acpi-0 Adapter: ACPI device Vcore Voltage: +1.11 V (min = +0.85 V, max = +1.60 V) +3.3 Voltage: +3.26 V (min = +2.97 V, max = +3.63 V) +5 Voltage: +4.97 V (min = +4.50 V, max = +5.50 V) +12 Voltage: +11.87 V (min = +10.20 V, max = +13.80 V) CPU FAN Speed: 846 RPM (min = 600 RPM) CHASSIS FAN Speed: 0 RPM (min = 600 RPM) CPU Temperature: +29.0°C (high = +60.0°C, crit = +95.0°C) MB Temperature: +28.0°C (high = +45.0°C, crit = +95.0°C) ... > Luca Gabriel _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors