From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <495BB5AE.1010805@domain.hid>
Date: Wed, 31 Dec 2008 19:10:54 +0100
From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
MIME-Version: 1.0
References: <8e2adebc0812311008j76d745f9r539a1b9108f8903d@domain.hid>
In-Reply-To: <8e2adebc0812311008j76d745f9r539a1b9108f8903d@domain.hid>
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Subject: Re: [Xenomai-help] ARM I-pipe port to OMAP osk board
List-Id: Help regarding installation and common use of Xenomai
	<xenomai.xenomai.org>
List-Unsubscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
List-Archive: </public/xenomai-help>
List-Post: <mailto:xenomai@xenomai.org>
List-Help: <mailto:xenomai-help-request@domain.hid>
List-Subscribe: <https://mail.gna.org/listinfo/xenomai-help>,
	<mailto:xenomai-help-request@domain.hid>
To: Mandar Thite <mandarthite@domain.hid>
Cc: xenomai@xenomai.org

Mandar Thite wrote:
> Hi all,
> Has anyone tried porting ARM ADEOS i-pipe patch to OMAP OSK board?
> 
> Although I haven't tried yet , may I ask if it is sufficient to follow
> instructions given in howto Adapting the ARM I-pipe patch to a new
> board<http://xenomai.org/index.php/I-pipe:ArmPorting>on XENOMAI site,
> for getting the patch work correctly on this particular
> board?

Well, yes, we hope to have put as much information on this page as
needed. However, if that is not enough, you can still ask questions on
this list, or even better, on the adeos mailing list, we will answer if
we can help.

-- 
					    Gilles.