All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: Shane McDonald <mcdonald.shane@gmail.com>
Cc: alan@lxorguk.ukuu.org.uk, bzolnier@gmail.com,
	linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5] Resurrect IT8172 IDE controller driver
Date: Mon, 05 Jan 2009 15:46:55 +0300	[thread overview]
Message-ID: <4962013F.9090900@ru.mvista.com> (raw)
In-Reply-To: <E1LIkqz-00021S-O5@localhost>

Hello.

Shane McDonald wrote:

> Support for the IT8172 IDE controller was removed from the kernel
> sometime after 2.6.18.  Support for the only boards that used the IT8172
> was removed from the kernel after 2.6.18, as they had never compiled
> since 2.6.0.  However, there are a couple of platforms that use this
> chip: the PMC-Sierra Xiao Hu thin-client computer, which is no longer
> in production, and the Linksys NSS4000 Network Attached Storage box,
> which is based on the Xiao Hu board.  I am attempting to add support
> for the Xiao Hu to the kernel, and this IT8172 IDE controller is the
> first bit of code in this effort.
>
> This patch resurrects the IT8172 IDE controller code.  I began with
> the 2.6.18 version of the it8172.c file, and have moved it forward so
> that it works with the latest version of the kernel.  I have run this
> driver on a PMC-Sierra Xiao Hu board with the 2.6.28 kernel, and
> I have had no problems with it in my configuration.  The attached patch
> applies cleanly against 2.6.28.
>
> Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
>   
[...]
> diff -uprN a/drivers/ide/it8172.c b/drivers/ide/it8172.c
> --- a/drivers/ide/it8172.c	1969-12-31 18:00:00.000000000 -0600
> +++ b/drivers/ide/it8172.c	2008-12-31 17:49:41.000000000 -0600
> @@ -0,0 +1,166 @@
> +/*
> + *
> + * BRIEF MODULE DESCRIPTION
> + *      IT8172 IDE controller support
> + *
> + * Copyright (C) 2000 MontaVista Software Inc.
> + * Copyright (C) 2008 Shane McDonald
> + *
> + *  This program is free software; you can redistribute  it and/or modify it
> + *  under  the terms of  the GNU General  Public License as published by the
> + *  Free Software Foundation;  either version 2 of the  License, or (at your
> + *  option) any later version.
> + *
> + *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
> + *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
> + *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
> + *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
> + *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
> + *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> + *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
> + *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + *
> + *  You should have received a copy of the  GNU General Public License along
> + *  with this program; if not, write  to the Free Software Foundation, Inc.,
> + *  675 Mass Ave, Cambridge, MA 02139, USA.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +#include <linux/ioport.h>
> +#include <linux/pci.h>
> +#include <linux/ide.h>
> +#include <linux/init.h>
> +
> +#define DRV_NAME "IT8172"
> +
> +static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio)
> +{
> +	ide_hwif_t *hwif	= HWIF(drive);
> +	struct pci_dev *dev	= to_pci_dev(hwif->dev);
> +	u16 drive_enables;
> +	u32 drive_timing;
> +
> +	/*
> +	 * The highest value of DIOR/DIOW pulse width and recovery time
> +	 * that can be set in the IT8172 is 8 PCI clock cycles.  As a result,
> +	 * it cannot be configured for PIO mode 0.  This table sets these
> +	 * parameters to the maximum supported by the IT8172.
> +	 */
> +	static const u8 timings[] = { 0x3f, 0x3c, 0x1b, 0x12, 0x0a };
>   

   The octal literals would fit this case better (3-bit field == octal 
digit). Oh well... :-)

MBR, Sergei



      parent reply	other threads:[~2009-01-05 12:47 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-02 14:18 [PATCH v5] Resurrect IT8172 IDE controller driver Shane McDonald
2009-01-02 22:25 ` Bartlomiej Zolnierkiewicz
2009-01-05 12:46 ` Sergei Shtylyov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4962013F.9090900@ru.mvista.com \
    --to=sshtylyov@ru.mvista.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mcdonald.shane@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.