All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: Jia Wang <wangjia@ultrarisc.com>,
	Andrew Lunn <andrew+netdev@lunn.ch>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Jose Abreu <joabreu@synopsys.com>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH net-next 3/3] net: stmmac: Add UltraRISC DP1000 GMAC support
Date: Tue, 1 Sep 2026 09:29:51 +0200	[thread overview]
Message-ID: <49620860-9bd5-48fb-bbaf-55da377e9018@bootlin.com> (raw)
In-Reply-To: <20260901-dwmac-ultrarisc-v1-3-f19454814bcf@ultrarisc.com>

Hello,

On 9/1/26 03:27, Jia Wang wrote:
> The DP1000 GMAC integration provides fixed TX and RX RGMII clock delays
> that cannot be disabled. For boards without PCB delays, "rgmii-id"
> describes the link, but passing that mode unchanged to the PHY would enable
> a second set of delays.
> 
> Use phy_fix_phy_mode_for_mac_delays() to translate "rgmii-id" to "rgmii"
> before attaching the PHY. Reject other RGMII modes because the fixed MAC
> delays cannot be combined with them without duplicating or omitting a
> delay.
> 
> Signed-off-by: Jia Wang <wangjia@ultrarisc.com>

Simple enough, this is nice :)

One thing, I'm going to start requiring this for new glue drivers, can you give
the output of "ethtool -t eth0" on your device with this new glue driver ?

You'll have to enable CONFIG_STMMAC_SELFTESTS

As this is is a 5.20, I'm expecting you'll get something like :

 1. MAC Loopback                 0
 2. MMC Counters                 0
 3. EEE                          -95
 4. Hash Filter MC               0
 5. Perfect Filter UC            0
 6. MC Filter                    0
 7. UC Filter                    0
 8. Flow Control                 -95
 9. RSS                          -95
10. VLAN Filtering               -110
11. VLAN Filtering (perf)        -110
12. Double VLAN Filter           -110
13. Double VLAN Filter (perf)    -110
14. Flexible RX Parser           -95
15. SA Insertion (desc)          0
16. SA Replacement (desc)        0
17. SA Insertion (reg)           0
18. SA Replacement (reg)         0
19. VLAN TX Insertion            -110
20. SVLAN TX Insertion           -95
21. L3 DA Filtering              -95
22. L3 SA Filtering              -95
23. L4 DA TCP Filtering          -95
24. L4 SA TCP Filtering          -95
25. L4 DA UDP Filtering          -95
26. L4 SA UDP Filtering          -95
27. ARP Offload                  -110
28. Jumbo Frame                  0
29. Multichannel Jumbo           -95
30. Split Header                 -95
31. TBS (ETF Scheduler)          -95

-95 (-EOPNOTSUP) and 0 are OK, watch for any other values.

If ARP Offload and any VLAN selftest (insertion and filtering), this is a known
issue and you can ignore :)

Maxime


> ---
>  MAINTAINERS                                        |  1 +
>  drivers/net/ethernet/stmicro/stmmac/Kconfig        | 11 +++++
>  drivers/net/ethernet/stmicro/stmmac/Makefile       |  1 +
>  .../net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c  | 54 ++++++++++++++++++++++
>  4 files changed, 67 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3b96ff0734e6..aacbab369b51 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -28008,6 +28008,7 @@ ULTRARISC DP1000 DWMAC GLUE LAYER
>  M:	Jia Wang <wangjia@ultrarisc.com>
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/net/ultrarisc,dp1000-gmac.yaml
> +F:	drivers/net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c
>  
>  ULTRARISC DP1000 PINCTRL DRIVER
>  M:	Jia Wang <wangjia@ultrarisc.com>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index e3dd5adda5ac..ab3c4cf96423 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -319,6 +319,17 @@ config DWMAC_THEAD
>  	  the stmmac device driver. This driver is used for T-HEAD TH1520
>  	  ethernet controller.
>  
> +config DWMAC_ULTRARISC
> +	tristate "UltraRISC DWMAC support"
> +	default ARCH_ULTRARISC
> +	depends on OF && (ARCH_ULTRARISC || COMPILE_TEST)
> +	help
> +	  Support for the Ethernet controller on the UltraRISC DP1000 SoC.
> +
> +	  This selects the UltraRISC platform specific glue layer support
> +	  for the stmmac device driver. This driver is used for the DP1000
> +	  GMAC Ethernet controller.
> +
>  config DWMAC_IMX8
>  	tristate "NXP IMX8 DWMAC support"
>  	default ARCH_MXC
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
> index a1cea2f57252..b16a456b730e 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
> @@ -36,6 +36,7 @@ obj-$(CONFIG_DWMAC_SUNXI)	+= dwmac-sunxi.o
>  obj-$(CONFIG_DWMAC_SUN8I)	+= dwmac-sun8i.o
>  obj-$(CONFIG_DWMAC_SUN55I)	+= dwmac-sun55i.o
>  obj-$(CONFIG_DWMAC_THEAD)	+= dwmac-thead.o
> +obj-$(CONFIG_DWMAC_ULTRARISC)	+= dwmac-ultrarisc.o
>  obj-$(CONFIG_DWMAC_DWC_QOS_ETH)	+= dwmac-dwc-qos-eth.o
>  obj-$(CONFIG_DWMAC_INTEL_PLAT)	+= dwmac-intel-plat.o
>  obj-$(CONFIG_DWMAC_LOONGSON1)	+= dwmac-loongson1.o
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c
> new file mode 100644
> index 000000000000..4bdda2665338
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ultrarisc.c
> @@ -0,0 +1,54 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * UltraRISC DWMAC platform driver
> + *
> + * Copyright (C) 2026 UltraRISC Technology (Shanghai) Co., Ltd.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/phy.h>
> +#include <linux/platform_device.h>
> +
> +#include "stmmac_platform.h"
> +
> +static int ultrarisc_dwmac_probe(struct platform_device *pdev)
> +{
> +	struct plat_stmmacenet_data *plat_dat;
> +	struct stmmac_resources stmmac_res;
> +	struct device *dev = &pdev->dev;
> +	int ret;
> +
> +	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "failed to get resources\n");
> +
> +	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
> +	if (IS_ERR(plat_dat))
> +		return dev_err_probe(dev, PTR_ERR(plat_dat), "failed to parse DT parameters\n");
> +
> +	plat_dat->phy_interface =
> +		phy_fix_phy_mode_for_mac_delays(plat_dat->phy_interface, true, true);
> +	if (plat_dat->phy_interface == PHY_INTERFACE_MODE_NA)
> +		return dev_err_probe(dev, -EINVAL, "unsupported phy interface mode\n");
> +
> +	return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
> +}
> +
> +static const struct of_device_id ultrarisc_dwmac_match[] = {
> +	{ .compatible = "ultrarisc,dp1000-gmac" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, ultrarisc_dwmac_match);
> +
> +static struct platform_driver ultrarisc_dwmac_driver = {
> +	.probe = ultrarisc_dwmac_probe,
> +	.driver = {
> +		.name = "ultrarisc-dwmac",
> +		.pm = &stmmac_pltfr_pm_ops,
> +		.of_match_table = ultrarisc_dwmac_match,
> +	},
> +};
> +module_platform_driver(ultrarisc_dwmac_driver);
> +
> +MODULE_DESCRIPTION("UltraRISC DWMAC platform driver");
> +MODULE_LICENSE("GPL");
> 



  reply	other threads:[~2026-09-01  7:30 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-09-01  1:27 [PATCH net-next 0/3] net: stmmac: Add UltraRISC DP1000 GMAC support Jia Wang
2026-09-01  1:27 ` [PATCH net-next 1/3] dt-bindings: net: snps,dwmac: Add UltraRISC DP1000 compatible Jia Wang
2026-09-01 17:46   ` Conor Dooley
2026-09-02  9:35     ` Jia Wang
2026-09-01  1:27 ` [PATCH net-next 2/3] dt-bindings: net: Add UltraRISC DP1000 GMAC Jia Wang
2026-09-01 17:47   ` Conor Dooley
2026-09-01  1:27 ` [PATCH net-next 3/3] net: stmmac: Add UltraRISC DP1000 GMAC support Jia Wang
2026-09-01  7:29   ` Maxime Chevallier [this message]
2026-09-01  8:32     ` Jia Wang
2026-09-01  9:05       ` Maxime Chevallier
2026-09-01 13:48   ` Andrew Lunn
2026-09-03  7:47     ` Jia Wang
2026-09-03 12:10       ` Andrew Lunn
2026-09-03 12:30         ` Maxime Chevallier
2026-09-04  6:01           ` Jia Wang
2026-09-07  5:48             ` Jia Wang
2026-09-07  7:28               ` Maxime Chevallier
2026-09-07  7:36                 ` Jia Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49620860-9bd5-48fb-bbaf-55da377e9018@bootlin.com \
    --to=maxime.chevallier@bootlin.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andrew+netdev@lunn.ch \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=joabreu@synopsys.com \
    --cc=krzk+dt@kernel.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    --cc=robh@kernel.org \
    --cc=wangjia@ultrarisc.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.