From: "Mark E. Hansen" <meh@Winfirst.Com>
To: lm-sensors@vger.kernel.org
Subject: Re: [lm-sensors] Asus KFN4-DRE board
Date: Mon, 05 Jan 2009 23:38:18 +0000 [thread overview]
Message-ID: <496299EA.3080406@Winfirst.Com> (raw)
In-Reply-To: <gjtlg7$htb$1@ger.gmane.org>
On 01/05/09 14:10, Mark Nienberg wrote:
> Luca Tettamanti wrote:
>
>> I'd like to see whether the board supports the ATK ACPI interface or not.
>
> I sent the DSDT to Luca off list but "unfortunately there's no trace of the ATK
> interface".
>
> So I'm still looking for a temperature solution. Is it safe to assume that since
> Temp2 and Temp3 have the same limits then they must be the two CPU temps? I did not
> set any temperature limits in the "sensors.conf" file.
>
> Thanks,
>
> Mark
>
You could just work the CPU and see which temps go up. Someone suggested this
earlier on this or another board, and I found it quite helpful in getting the
temps straightened out.
for example:
md5sum /dev/zero
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
prev parent reply other threads:[~2009-01-05 23:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-05 19:02 [lm-sensors] Asus KFN4-DRE board Mark Nienberg
2009-01-05 20:46 ` Luca Tettamanti
2009-01-05 22:10 ` Mark Nienberg
2009-01-05 23:38 ` Mark E. Hansen [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=496299EA.3080406@Winfirst.Com \
--to=meh@winfirst.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.