From: Wolfgang Grandegger <wg@grandegger.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [RFC/PATCH 3/4] Add support for TQM-specific chip select logic to UPM-FSL
Date: Wed, 07 Jan 2009 19:57:12 +0100 [thread overview]
Message-ID: <4964FB08.4090204@grandegger.com> (raw)
For the NAND chips on the TQM8548 modules, a special chip-select logic is
used. It uses dedicated address lines to be controlled via UPM machine
address register (mar). This patch adds corresponding support to the
FSL-UPM driver.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
---
drivers/mtd/nand/fsl_upm.c | 5 ++++-
include/linux/mtd/fsl_upm.h | 1 +
2 files changed, 5 insertions(+), 1 deletion(-)
Index: u-boot/drivers/mtd/nand/fsl_upm.c
===================================================================
--- u-boot.orig/drivers/mtd/nand/fsl_upm.c
+++ u-boot/drivers/mtd/nand/fsl_upm.c
@@ -90,8 +90,11 @@ static void fun_cmd_ctrl(struct mtd_info
mar = cmd << (32 - fun->width);
io_addr = fun->upm.io_addr;
#if NAND_MAX_CHIPS > 1
- if (fun->chip_nr > 0)
+ if (fun->chip_nr > 0) {
io_addr += fun->chip_offset * fun->chip_nr;
+ if (fun->upm_mar_chip_offset)
+ mar |= fun->upm_mar_chip_offset * fun->chip_nr;
+ }
#endif
fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
Index: u-boot/include/linux/mtd/fsl_upm.h
===================================================================
--- u-boot.orig/include/linux/mtd/fsl_upm.h
+++ u-boot/include/linux/mtd/fsl_upm.h
@@ -28,6 +28,7 @@ struct fsl_upm_nand {
int width;
int upm_cmd_offset;
int upm_addr_offset;
+ int upm_mar_chip_offset;
int wait_pattern;
int (*dev_ready)(int chip_nr);
int chip_delay;
reply other threads:[~2009-01-07 18:57 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4964FB08.4090204@grandegger.com \
--to=wg@grandegger.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.