From mboxrd@z Thu Jan 1 00:00:00 1970 From: Brad Campbell Subject: Re: Support for Marvel 6141 in ahci.c Date: Sat, 10 Jan 2009 23:55:52 +0900 Message-ID: <4968B6F8.9050005@wasp.net.au> References: <49686AE8.1050209@digadd.de> <20090110122438.0992c319@lxorguk.ukuu.org.uk> <49689A9B.2070508@digadd.de> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from 50.38.69.212.in-addr.fnarfbargle.com ([93.93.128.63]:44311 "EHLO fnarfbargle.com" rhost-flags-OK-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1751913AbZAJPin (ORCPT ); Sat, 10 Jan 2009 10:38:43 -0500 In-Reply-To: <49689A9B.2070508@digadd.de> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: "Christian P. Schmidt" Cc: Alan Cox , linux-ide@vger.kernel.org Christian P. Schmidt wrote: > Hi Alan, > > Alan Cox wrote: >> On Sat, 10 Jan 2009 12:31:20 +0300 >> "Christian P. Schmidt" wrote: >> >>> Hi all, >>> >>> The Marvell 6141 >>> 08:00.0 SATA controller: Marvell Technology Group Ltd. 88SE614x SATA >>> II PCI-E controller (rev 01) >>> 08:00.0 0106: 11ab:6141 (rev 01) >>> seems to work with the ahci driver with the attached patch: >> >> Try using the PATA port. > > Sorry, can't do - the chip is on an ASUS M2N32 WS Professional mainboard > where the PATA is only on the MCP55. How is that working for you? I did the same style of patch back in 2.6.26 (on the same board) and found it died _hard_ when writing to more than one port at a time. It worked with only one drive attached though, although I could not get hot plugging to work either. Regards, Brad -- Dolphins are so intelligent that within a few weeks they can train Americans to stand at the edge of the pool and throw them fish.