From: Jeff Garzik <jeff@garzik.org>
To: Brad Campbell <brad@wasp.net.au>
Cc: "Christian P. Schmidt" <schmidt@digadd.de>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-ide@vger.kernel.org
Subject: Re: Support for Marvel 6141 in ahci.c
Date: Sat, 10 Jan 2009 10:41:42 -0500 [thread overview]
Message-ID: <4968C1B6.3010701@garzik.org> (raw)
In-Reply-To: <4968B6F8.9050005@wasp.net.au>
Brad Campbell wrote:
> Christian P. Schmidt wrote:
>> Hi Alan,
>>
>> Alan Cox wrote:
>>> On Sat, 10 Jan 2009 12:31:20 +0300
>>> "Christian P. Schmidt" <schmidt@digadd.de> wrote:
>>>
>>>> Hi all,
>>>>
>>>> The Marvell 6141
>>>> 08:00.0 SATA controller: Marvell Technology Group Ltd. 88SE614x SATA
>>>> II PCI-E controller (rev 01)
>>>> 08:00.0 0106: 11ab:6141 (rev 01)
>>>> seems to work with the ahci driver with the attached patch:
>>>
>>> Try using the PATA port.
>>
>> Sorry, can't do - the chip is on an ASUS M2N32 WS Professional
>> mainboard where the PATA is only on the MCP55.
>
> How is that working for you? I did the same style of patch back in
> 2.6.26 (on the same board) and found it died _hard_ when writing to more
> than one port at a time. It worked with only one drive attached though,
> although I could not get hot plugging to work either.
Yes... that is why the ID is not in there at present :/
Jeff
next prev parent reply other threads:[~2009-01-10 15:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-10 9:31 Support for Marvel 6141 in ahci.c Christian P. Schmidt
2009-01-10 12:24 ` Alan Cox
2009-01-10 12:54 ` Christian P. Schmidt
2009-01-10 14:55 ` Brad Campbell
2009-01-10 15:41 ` Jeff Garzik [this message]
2009-01-10 15:45 ` Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4968C1B6.3010701@garzik.org \
--to=jeff@garzik.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=brad@wasp.net.au \
--cc=linux-ide@vger.kernel.org \
--cc=schmidt@digadd.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.