All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hinko Kocevar <hinko.kocevar@cetrtapot.si>
To: buildroot@busybox.net
Subject: [Buildroot] arch support
Date: Mon, 12 Jan 2009 13:48:32 +0100	[thread overview]
Message-ID: <496B3C20.1080101@cetrtapot.si> (raw)
In-Reply-To: <87vdskhjht.fsf@macbook.be.48ers.dk>

Peter Korsgaard wrote:
>>>>>> "Hinko" == Hinko Kocevar <hinko.kocevar@cetrtapot.si> writes:
> 
> Hi,
> 
>  >> cris: broken in kernel headers
> 
>  Hinko> I have similar setup of toolchain packages and works for me
>  Hinko> here, except for linux headers which are 2.6.26. I'll try to
>  Hinko> compile it with 2.6.28, if IIRC there were some arch/cris
>  Hinko> folder movements in 2.6.28 that could be the culprit here.
> 
> Ok, thanks.
> 

Here it goes:
 - some minor fixes to buildroot
  cris_buildroot.patch

 - two cris patches to be placed in toolchain/kernel-headers subdir in order to build toolchain and linux kernel 2.6.28
  linux-2.6.28-cris-headers.patch
  linux-2.6.28-cris-objcopy-flags.patch

With these patch set you should be able to build uClibc based toolchain with above mentioned versions of packages. I haven't tried the toolchain nor the Linux kernel image. I'll do that sometime later this week, because I'm not sure if I need to patch the gcc 4.3.2 with another cris related patch (toolchain/gcc/4.3.x/999-gcc-4.3.0-cris-compiler-error-fix.patch). Otherwise compilation of kernel sources in some ipv4 related code fails with internal compiler error.

Note: I was unable to retrieve mpfr 2.3.0 so I used 2.3.1 instead (that I had laying around).

hinkok at alala /work/buildroot.new $ ./build_cris/staging_dir/usr/bin/cris-linux-uclibc-gcc -v
Using built-in specs.
Target: cris-linux-uclibc
Configured with: /work/buildroot.new/toolchain_build_cris/gcc-4.3.2/configure --prefix=/usr --build=i386-pc-linux-gnu --host=i386-pc-linux-gnu --target=cris-linux-uclibc --enable-languages=c --with-sysroot=/work/buildroot.new/build_cris/staging_dir --with-build-time-tools=/work/buildroot.new/build_cris/staging_dir/usr/cris-linux-uclibc/bin --disable-__cxa_atexit --enable-target-optspace --with-gnu-ld --enable-shared --with-gmp=/work/buildroot.new/toolchain_build_cris/gmp --with-mpfr=/work/buildroot.new/toolchain_build_cris/mpfr --disable-nls --enable-threads --disable-multilib --disable-decimal-float --disable-largefile : (reconfigured) /work/buildroot.new/toolchain_build_cris/gcc-4.3.2/configure --prefix=/usr --build=i386-pc-linux-gnu --host=i386-pc-linux-gnu --target=cris-linux-uclibc --enable-languages=c --with-sysroot=/work/buildroot.new/build_cris/staging_dir --with-build-time-tools=/work/buildroot.new/build_cris/staging_dir/usr/cris-linux-uclibc/bin --disable-__cxa_atex
it --enable-target-optspace --with-gnu-ld --enable-shared --with-gmp=/work/buildroot.new/toolchain_build_cris/gmp --with-mpfr=/work/buildroot.new/toolchain_build_cris/mpfr --disable-nls --enable-threads --disable-multilib --disable-decimal-float --disable-largefile : (reconfigured) /work/buildroot.new/toolchain_build_cris/gcc-4.3.2/configure --prefix=/usr --build=i386-pc-linux-gnu --host=i386-pc-linux-gnu --target=cris-linux-uclibc --enable-languages=c --with-sysroot=/work/buildroot.new/build_cris/staging_dir --with-build-time-tools=/work/buildroot.new/build_cris/staging_dir/usr/cris-linux-uclibc/bin --disable-__cxa_atexit --enable-target-optspace --with-gnu-ld --enable-shared --with-gmp=/work/buildroot.new/toolchain_build_cris/gmp --with-mpfr=/work/buildroot.new/toolchain_build_cris/mpfr --disable-nls --enable-threads --disable-multilib --disable-decimal-float --disable-largefile
Thread model: posix
gcc version 4.3.2 (GCC) 


HTH,
Hinko
-- 
Hinko Ko?evar, OSS developer
?ETRTA POT, d.o.o.
Planina 3, 4000 Kranj, SI EU
tel     ++386 (0) 4 280 66 03
e-mail  hinko.kocevar at cetrtapot.si
http    www.cetrtapot.si

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: linux-2.6.28-cris-headers.patch
Url: http://lists.busybox.net/pipermail/buildroot/attachments/20090112/b084a3ec/attachment.diff 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: linux-2.6.28-cris-objcopy-flags.patch
Url: http://lists.busybox.net/pipermail/buildroot/attachments/20090112/b084a3ec/attachment-0001.diff 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: cris_buildroot.patch
Url: http://lists.busybox.net/pipermail/buildroot/attachments/20090112/b084a3ec/attachment-0002.diff 
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: 999-gcc-4.3.0-cris-compiler-error-fix.patch
Url: http://lists.busybox.net/pipermail/buildroot/attachments/20090112/b084a3ec/attachment-0003.diff 

  reply	other threads:[~2009-01-12 12:48 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-12  8:54 [Buildroot] arch support Peter Korsgaard
2009-01-12  9:00 ` Hans-Christian Egtvedt
2009-01-12  9:08   ` Peter Korsgaard
2009-01-12 10:33   ` Ulf Samuelsson
2009-01-12 10:35   ` Ulf Samuelsson
2009-01-12  9:07 ` Bernhard Reutner-Fischer
2009-01-12  9:22   ` Peter Korsgaard
2009-01-12 10:59 ` Hinko Kocevar
2009-01-12 11:05   ` Peter Korsgaard
2009-01-12 12:48     ` Hinko Kocevar [this message]
2009-01-12 20:17       ` Peter Korsgaard
2009-01-12 14:31 ` Hamish Guthrie
2009-01-12 14:38   ` Peter Korsgaard
2009-01-13  9:04     ` Hamish Guthrie
2009-01-13 11:40       ` Hinko Kocevar
2009-01-15 22:01     ` Ulf Samuelsson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=496B3C20.1080101@cetrtapot.si \
    --to=hinko.kocevar@cetrtapot.si \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.