From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Date: Tue, 13 Jan 2009 08:08:40 +0000 Subject: Re: [lm-sensors] Patch: libsensors: add support for ACPI bus Message-Id: <496C4C08.1010102@redhat.com> List-Id: References: <495D3AFC.5040809@redhat.com> In-Reply-To: <495D3AFC.5040809@redhat.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Jean Delvare wrote: > Hi Hans, >=20 > Sorry for the late answer. >=20 > On Thu, 01 Jan 2009 22:51:56 +0100, Hans de Goede wrote: >> The way the new atk0110 driver work it ends up being connected to an "AC= PI"=20 >> bus, this patch adds support for this to lm_sensors-3.0.3 >> >> With this patch the sensors output on an Asus board looks like this: >> >> atk0110-acpi-0 >> Adapter: ACPI interface >> Vcore Voltage: +1.45 V (min =3D +1.45 V, max =3D +1.75 V) >> +3.3 Voltage: +3.38 V (min =3D +3.00 V, max =3D +3.60 V) >> +5.0 Voltage: +5.16 V (min =3D +4.50 V, max =3D +5.50 V) >> +12.0 Voltage: +12.24 V (min =3D +11.20 V, max =3D +13.20 V) >> CPU FAN Speed: 1516 RPM (min =3D 0 RPM) >> CHASSIS FAN Speed: 0 RPM (min =3D 0 RPM) >> POWER FAN Speed: 0 RPM (min =3D 0 RPM) >> CHASSIS4 FAN FAN Speed: 0 RPM (min =3D 0 RPM) >> CHASSIS2 FAN FAN Speed: 0 RPM (min =3D 0 RPM) >> CHASSIS3 FAN FAN Speed: 0 RPM (min =3D 0 RPM) >> CPU Temperature: +43.0=B0C (high =3D +90.0=B0C, crit =3D +125.0= =B0C) >> MB Temperature: +44.0=B0C (high =3D +45.0=B0C, crit =3D +90.0= =B0C) >> >> >> Jean, can you please review this patch, if its ok I can apply it myself. >=20 > I have no objection, the patch looks just fine to me, just go ahead and > apply it. Please don't forget to apply the libsensors-API document. >=20 Thanks for the review, API doc updated and committed. Regards, Hans _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors