From: Denis Joseph Barrow <D.Barow@option.com>
To: Linux netdev Mailing list <netdev@vger.kernel.org>
Subject: possible problem with tg3.c not loading firmware
Date: Tue, 13 Jan 2009 15:03:57 +0100 [thread overview]
Message-ID: <496C9F4D.7080101@option.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 759 bytes --]
Hi,
I'm running ubuntu hardy heron 8.0.4.
my Ethernet controller is a Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)
On linux-2.6.28-rc6 for the Tigon 3 driver there doesnt appear to be a seperate firmware file.
on linux-2.6.29-rc1 there is a tg3_tso5.bin.ihex.
There appears to be teething problems in getting the firmware file loaded on 2.6.29-rc1.
>From the dmesg attached the firmware doesn't appear to be loaded on first boot.
When I explicitly rmmod & modprobe the tg3 module it then works.
--
best regards,
D.J. Barrow
Linux Kernel Developer
Option NV, Gaston Geenslaan 14, 3001 Leuven, Belgium
T: +32 16 311 621
F: +32 16 207 164
d.barow@option.com
www.option.com
Disclaimer:
http://www.option.com/company/disclaimer.shtml
[-- Attachment #2: dmesg.log --]
[-- Type: text/plain, Size: 42516 bytes --]
[ 0.000000] Linux version 2.6.29-rc1 (djbarrow@djbarrow-laptop) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Jan 13 13:41:56 CET 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
[ 0.000000] BIOS-e820: 000000003f7d0000 - 000000003f7e5600 (reserved)
[ 0.000000] BIOS-e820: 000000003f7e5600 - 000000003f7f8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f7f8000 - 000000003f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
[ 0.000000] BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x3f7d0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-d000
[ 0.000000] RAMDISK: 34d5e000 - 37fefbac
[ 0.000000] Allocated new RAMDISK: 005c5000 - 03856bac
[ 0.000000] Move RAMDISK from 0000000034d5e000 - 0000000037fefbab to 005c5000 - 03856bab
[ 0.000000] ACPI: RSDP 000F7D70, 0014 (r0 HP )
[ 0.000000] ACPI: RSDT 3F7E5684, 003C (r1 HP 30AA 28040620 HP 1)
[ 0.000000] ACPI: FACP 3F7E5600, 0084 (r2 HP 30AA 2 HP 1)
[ 0.000000] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[ 0.000000] ACPI: DSDT 3F7E5798, F360 (r1 HP nc6340 10000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3F7F7E80, 0040
[ 0.000000] ACPI: APIC 3F7E56C0, 0068 (r1 HP 30AA 1 HP 1)
[ 0.000000] ACPI: MCFG 3F7E5728, 003C (r1 HP 30AA 1 HP 1)
[ 0.000000] ACPI: TCPA 3F7E5764, 0032 (r2 HP 30AA 1 HP 1)
[ 0.000000] ACPI: SSDT 3F7F4AF8, 033A (r1 HP HPQPAT 1 MSFT 100000E)
[ 0.000000] ACPI: SSDT 3F7F5305, 04E7 (r1 HP CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00009000 - 0000ff00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c1004] TEXT DATA BSS ==> [0000100000 - 00005c1004]
[ 0.000000] #4 [00005c2000 - 00005c5000] INIT_PG_TABLE ==> [00005c2000 - 00005c5000]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
[ 0.000000] #7 [00005c5000 - 0003856bac] NEW RAMDISK ==> [00005c5000 - 0003856bac]
[ 0.000000] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f7d0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f7d0
[ 0.000000] On node 0 totalpages: 259951
[ 0.000000] free_area_init_node: node 0, pgdat c048c580, node_mem_map c3857000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3967 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 256 pages used for memmap
[ 0.000000] HighMem zone: 32466 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3f800000:bf400000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Allocating 36864 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257919
[ 0.000000] Kernel command line: root=UUID=2803f4e0-67f7-4044-bba4-2eacabda4050 ro quiet splash maxcpus=1
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.742 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 973696k/1040192k available (2411k kernel code, 65716k reserved, 1342k data, 436k init, 130888k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.004000] .init : 0xc04b1000 - 0xc051e000 ( 436 kB)
[ 0.004000] .data : 0xc035af96 - 0xc04aa814 (1342 kB)
[ 0.004000] .text : 0xc0100000 - 0xc035af96 (2411 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.48 BogoMIPS (lpj=7978968)
[ 0.004027] Security Framework initialized
[ 0.004034] SELinux: Disabled at boot.
[ 0.004043] Mount-cache hash table entries: 512
[ 0.004172] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004175] CPU: L2 cache: 2048K
[ 0.004178] CPU: Physical Processor ID: 0
[ 0.004179] CPU: Processor Core ID: 0
[ 0.004183] using mwait in idle threads.
[ 0.004190] Checking 'hlt' instruction... OK.
[ 0.020409] SMP alternatives: switching to UP code
[ 0.083742] ACPI: Core revision 20081204
[ 0.104454] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.146935] CPU0: Genuine Intel(R) CPU T2500 @ 2.00GHz stepping 08
[ 0.148001] Brought up 1 CPUs
[ 0.148001] Total of 1 processors activated (3989.48 BogoMIPS).
[ 0.148001] CPU0 attaching NULL sched-domain.
[ 0.148001] net_namespace: 1008 bytes
[ 0.148001] HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[ 0.148001] Booting paravirtualized kernel on bare hardware
[ 0.148001] NET: Registered protocol family 16
[ 0.148001] EISA bus registered
[ 0.148001] ACPI: bus type pci registered
[ 0.148001] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.148001] PCI: Not using MMCONFIG.
[ 0.148001] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
[ 0.148001] PCI: Using configuration type 1 for base access
[ 0.148001] bio: create slab <bio-0> at 0
[ 0.148084] ACPI: EC: Look up EC in DSDT
[ 0.151374] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.200327] ACPI: Interpreter enabled
[ 0.200333] ACPI: (supports S0 S3 S4 S5)
[ 0.200347] ACPI: Using IOAPIC for interrupt routing
[ 0.200412] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.211753] PCI: MCFG area at f8000000 reserved in ACPI motherboard resources
[ 0.211756] PCI: Using MMCONFIG for extended config space
[ 0.224428] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.224430] ACPI: EC: driver started in interrupt mode
[ 0.224650] ACPI: No dock devices found.
[ 0.224660] ACPI: PCI Root Bridge [C002] (0000:00)
[ 0.224759] pci 0000:00:02.0: reg 10 32bit mmio: [0xe8400000-0xe847ffff]
[ 0.224764] pci 0000:00:02.0: reg 14 io port: [0x6000-0x6007]
[ 0.224768] pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.224773] pci 0000:00:02.0: reg 1c 32bit mmio: [0xe8480000-0xe84bffff]
[ 0.224809] pci 0000:00:02.1: reg 10 32bit mmio: [0xe8500000-0xe857ffff]
[ 0.224920] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe8580000-0xe8583fff]
[ 0.224978] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.224984] pci 0000:00:1b.0: PME# disabled
[ 0.225064] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.225068] pci 0000:00:1c.0: PME# disabled
[ 0.225152] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.225157] pci 0000:00:1c.2: PME# disabled
[ 0.225240] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.225245] pci 0000:00:1c.3: PME# disabled
[ 0.225306] pci 0000:00:1d.0: reg 20 io port: [0x6020-0x603f]
[ 0.225366] pci 0000:00:1d.1: reg 20 io port: [0x6040-0x605f]
[ 0.225426] pci 0000:00:1d.2: reg 20 io port: [0x6060-0x607f]
[ 0.225486] pci 0000:00:1d.3: reg 20 io port: [0x6080-0x609f]
[ 0.225550] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe8584000-0xe85843ff]
[ 0.225611] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.225617] pci 0000:00:1d.7: PME# disabled
[ 0.225785] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.225790] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.225795] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH6 GPIO
[ 0.225799] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[ 0.225807] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007)
[ 0.225869] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.225877] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.225884] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.225892] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.225899] pci 0000:00:1f.2: reg 20 io port: [0x60a0-0x60af]
[ 0.225933] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.225937] pci 0000:00:1f.2: PME# disabled
[ 0.226132] pci 0000:08:00.0: reg 10 32bit mmio: [0xe8000000-0xe8000fff]
[ 0.226372] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.226385] pci 0000:08:00.0: PME# disabled
[ 0.226492] pci 0000:00:1c.0: bridge 32bit mmio: [0xe8000000-0xe80fffff]
[ 0.226552] pci 0000:00:1c.2: bridge io port: [0x4000-0x5fff]
[ 0.226557] pci 0000:00:1c.2: bridge 32bit mmio: [0xe4000000-0xe7ffffff]
[ 0.226616] pci 0000:00:1c.3: bridge io port: [0x2000-0x3fff]
[ 0.226621] pci 0000:00:1c.3: bridge 32bit mmio: [0xe0000000-0xe3ffffff]
[ 0.226687] pci 0000:02:06.0: reg 10 32bit mmio: [0xe8100000-0xe8100fff]
[ 0.226716] pci 0000:02:06.0: supports D1 D2
[ 0.226718] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.226723] pci 0000:02:06.0: PME# disabled
[ 0.226775] pci 0000:02:06.1: reg 10 32bit mmio: [0xe8101000-0xe81017ff]
[ 0.226785] pci 0000:02:06.1: reg 14 32bit mmio: [0xe8104000-0xe8107fff]
[ 0.226851] pci 0000:02:06.1: supports D1 D2
[ 0.226853] pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot
[ 0.226858] pci 0000:02:06.1: PME# disabled
[ 0.226909] pci 0000:02:06.2: reg 10 32bit mmio: [0xe8108000-0xe8108fff]
[ 0.226981] pci 0000:02:06.2: supports D1 D2
[ 0.226983] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
[ 0.226989] pci 0000:02:06.2: PME# disabled
[ 0.227041] pci 0000:02:06.3: reg 10 32bit mmio: [0xe8109000-0xe81090ff]
[ 0.227114] pci 0000:02:06.3: supports D1 D2
[ 0.227115] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
[ 0.227121] pci 0000:02:06.3: PME# disabled
[ 0.227218] pci 0000:02:0e.0: reg 10 32bit mmio: [0xe8110000-0xe811ffff]
[ 0.227310] pci 0000:02:0e.0: PME# supported from D3hot D3cold
[ 0.227316] pci 0000:02:0e.0: PME# disabled
[ 0.227361] pci 0000:00:1e.0: transparent bridge
[ 0.227368] pci 0000:00:1e.0: bridge 32bit mmio: [0xe8100000-0xe83fffff]
[ 0.227421] pci_bus 0000:00: on NUMA node 0
[ 0.227428] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[ 0.227655] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C092._PRT]
[ 0.227759] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0FB._PRT]
[ 0.227848] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C10E._PRT]
[ 0.227943] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C111._PRT]
[ 0.265317] ACPI: PCI Interrupt Link [C107] (IRQs 10 *11)
[ 0.265557] ACPI: PCI Interrupt Link [C108] (IRQs 10 *11)
[ 0.265794] ACPI: PCI Interrupt Link [C109] (IRQs *10 11)
[ 0.266032] ACPI: PCI Interrupt Link [C10A] (IRQs *10 11)
[ 0.266268] ACPI: PCI Interrupt Link [C123] (IRQs *10 11)
[ 0.266502] ACPI: PCI Interrupt Link [C124] (IRQs 10 *11)
[ 0.266738] ACPI: PCI Interrupt Link [C125] (IRQs *10 11)
[ 0.266848] ACPI Exception (pci_link-0189): AE_NOT_FOUND, Evaluating _PRS [20081204]
[ 0.267196] ACPI: Power Resource [C1E8] (on)
[ 0.267388] ACPI: Power Resource [C1F5] (on)
[ 0.267439] ACPI: Power Resource [C20B] (on)
[ 0.267492] ACPI: Power Resource [C213] (off)
[ 0.267601] ACPI: Power Resource [C308] (off)
[ 0.267708] ACPI: Power Resource [C309] (off)
[ 0.267815] ACPI: Power Resource [C30A] (off)
[ 0.267920] ACPI: Power Resource [C30B] (off)
[ 0.268305] PCI: Using ACPI for IRQ routing
[ 0.268547] NET: Registered protocol family 8
[ 0.268547] NET: Registered protocol family 20
[ 0.268547] hpet clockevent registered
[ 0.268547] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.268547] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.268547] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.272044] pnp: PnP ACPI init
[ 0.272044] ACPI: bus type pnp registered
[ 0.282860] pnp: PnP ACPI: found 14 devices
[ 0.282862] ACPI: ACPI bus type pnp unregistered
[ 0.282866] PnPBIOS: Disabled by ACPI PNP
[ 0.282875] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.282878] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.282881] system 00:00: iomem range 0x100000-0x3f7fffff could not be reserved
[ 0.282890] system 00:0b: ioport range 0x500-0x55f has been reserved
[ 0.282892] system 00:0b: ioport range 0x800-0x80f has been reserved
[ 0.282895] system 00:0b: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.282898] system 00:0b: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.282906] system 00:0c: ioport range 0x4d0-0x4d1 has been reserved
[ 0.282908] system 00:0c: ioport range 0x1000-0x107f has been reserved
[ 0.282911] system 00:0c: ioport range 0x1100-0x113f has been reserved
[ 0.282913] system 00:0c: ioport range 0x1200-0x121f has been reserved
[ 0.282916] system 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.282919] system 00:0c: iomem range 0xfec00000-0xfec000ff has been reserved
[ 0.282922] system 00:0c: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.282924] system 00:0c: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.282927] system 00:0c: iomem range 0xfed90000-0xfed9afff has been reserved
[ 0.282932] system 00:0d: iomem range 0xfeda0000-0xfedbffff has been reserved
[ 0.282935] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.317825] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08
[ 0.317828] pci 0000:00:1c.0: IO window: disabled
[ 0.317834] pci 0000:00:1c.0: MEM window: 0xe8000000-0xe80fffff
[ 0.317839] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.317846] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:18
[ 0.317850] pci 0000:00:1c.2: IO window: 0x4000-0x5fff
[ 0.317856] pci 0000:00:1c.2: MEM window: 0xe4000000-0xe7ffffff
[ 0.317860] pci 0000:00:1c.2: PREFETCH window: disabled
[ 0.317867] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:20
[ 0.317871] pci 0000:00:1c.3: IO window: 0x2000-0x3fff
[ 0.317877] pci 0000:00:1c.3: MEM window: 0xe0000000-0xe3ffffff
[ 0.317881] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.317891] pci 0000:02:06.0: CardBus bridge, secondary bus 0000:03
[ 0.317893] pci 0000:02:06.0: IO window: 0x007000-0x0070ff
[ 0.317899] pci 0000:02:06.0: IO window: 0x007400-0x0074ff
[ 0.317904] pci 0000:02:06.0: PREFETCH window: 0x40000000-0x43ffffff
[ 0.317910] pci 0000:02:06.0: MEM window: 0x44000000-0x47ffffff
[ 0.317916] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.317919] pci 0000:00:1e.0: IO window: 0x7000-0x7fff
[ 0.317925] pci 0000:00:1e.0: MEM window: 0xe8100000-0xe83fffff
[ 0.317930] pci 0000:00:1e.0: PREFETCH window: 0x00000040000000-0x00000043ffffff
[ 0.317944] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.317950] pci 0000:00:1c.0: setting latency timer to 64
[ 0.317956] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.317960] pci 0000:00:1c.2: setting latency timer to 64
[ 0.317967] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.317971] pci 0000:00:1c.3: setting latency timer to 64
[ 0.317979] pci 0000:00:1e.0: setting latency timer to 64
[ 0.317985] pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.317992] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.317994] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.317996] pci_bus 0000:08: resource 0 mem: [0x0-0x0]
[ 0.317998] pci_bus 0000:08: resource 1 mem: [0xe8000000-0xe80fffff]
[ 0.318001] pci_bus 0000:08: resource 2 mem: [0x0-0x0]
[ 0.318003] pci_bus 0000:08: resource 3 mem: [0x0-0x0]
[ 0.318005] pci_bus 0000:18: resource 0 io: [0x4000-0x5fff]
[ 0.318007] pci_bus 0000:18: resource 1 mem: [0xe4000000-0xe7ffffff]
[ 0.318009] pci_bus 0000:18: resource 2 mem: [0x0-0x0]
[ 0.318011] pci_bus 0000:18: resource 3 mem: [0x0-0x0]
[ 0.318013] pci_bus 0000:20: resource 0 io: [0x2000-0x3fff]
[ 0.318015] pci_bus 0000:20: resource 1 mem: [0xe0000000-0xe3ffffff]
[ 0.318017] pci_bus 0000:20: resource 2 mem: [0x0-0x0]
[ 0.318019] pci_bus 0000:20: resource 3 mem: [0x0-0x0]
[ 0.318021] pci_bus 0000:02: resource 0 io: [0x7000-0x7fff]
[ 0.318024] pci_bus 0000:02: resource 1 mem: [0xe8100000-0xe83fffff]
[ 0.318026] pci_bus 0000:02: resource 2 mem: [0x40000000-0x43ffffff]
[ 0.318028] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.318030] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.318033] pci_bus 0000:03: resource 0 io: [0x7000-0x70ff]
[ 0.318035] pci_bus 0000:03: resource 1 io: [0x7400-0x74ff]
[ 0.318037] pci_bus 0000:03: resource 2 mem: [0x40000000-0x43ffffff]
[ 0.318039] pci_bus 0000:03: resource 3 mem: [0x44000000-0x47ffffff]
[ 0.318064] NET: Registered protocol family 2
[ 0.318214] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.318468] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.319145] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.319481] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.319484] TCP reno registered
[ 0.319586] NET: Registered protocol family 1
[ 0.319702] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 2.336996] it is
[ 4.442692] Freeing initrd memory: 51782k freed
[ 4.443359] audit: initializing netlink socket (disabled)
[ 4.443376] type=2000 audit(1231857965.440:1): initialized
[ 4.449977] highmem bounce pool size: 64 pages
[ 4.451905] VFS: Disk quotas dquot_6.5.2
[ 4.451982] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 4.452038] msgmni has been set to 1748
[ 4.452194] alg: No test for stdrng (krng)
[ 4.452205] io scheduler noop registered
[ 4.452207] io scheduler anticipatory registered
[ 4.452209] io scheduler deadline registered
[ 4.452219] io scheduler cfq registered (default)
[ 4.452232] pci 0000:00:02.0: Boot video device
[ 4.452427] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 4.452507] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 4.452677] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 4.452751] pcieport-driver 0000:00:1c.2: irq 25 for MSI/MSI-X
[ 4.452915] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 4.452988] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 4.453349] isapnp: Scanning for PnP cards...
[ 4.807534] isapnp: No Plug & Play device found
[ 4.832904] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.833066] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.833707] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 4.835225] brd: module loaded
[ 4.835287] input: Macintosh mouse button emulation as /class/input/input0
[ 4.835305] Uniform Multi-Platform E-IDE driver
[ 4.835376] ide-gd driver 1.18
[ 4.835489] PNP: PS/2 Controller [PNP0303:C208,PNP0f13:C209] at 0x60,0x64 irq 1,12
[ 4.837495] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 4.838199] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.838204] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.838206] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.838208] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.838210] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.838719] mice: PS/2 mouse device common for all mice
[ 4.838827] EISA: Probing bus 0 at eisa.0
[ 4.838835] Cannot allocate resource for EISA slot 1
[ 4.838837] Cannot allocate resource for EISA slot 2
[ 4.838839] Cannot allocate resource for EISA slot 3
[ 4.838841] Cannot allocate resource for EISA slot 4
[ 4.838843] Cannot allocate resource for EISA slot 5
[ 4.838845] Cannot allocate resource for EISA slot 6
[ 4.838847] Cannot allocate resource for EISA slot 7
[ 4.838853] EISA: Detected 0 cards.
[ 4.838856] cpuidle: using governor ladder
[ 4.838858] cpuidle: using governor menu
[ 4.839283] Using IPI No-Shortcut mode
[ 4.839430] registered taskstats version 1
[ 4.839551] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.839553] EDD information not available.
[ 4.839796] Freeing unused kernel memory: 436k freed
[ 4.860846] input: AT Translated Set 2 keyboard as /class/input/input1
[ 6.065416] fuse init (API version 7.11)
[ 6.072831] fan PNP0C0B:00: registered as cooling_device0
[ 6.072838] ACPI: Fan [C30C] (off)
[ 6.073077] fan PNP0C0B:01: registered as cooling_device1
[ 6.073082] ACPI: Fan [C30D] (off)
[ 6.073324] fan PNP0C0B:02: registered as cooling_device2
[ 6.073329] ACPI: Fan [C30E] (off)
[ 6.073566] fan PNP0C0B:03: registered as cooling_device3
[ 6.073571] ACPI: Fan [C30F] (off)
[ 6.082648] ACPI: SSDT 3F7F4EBB, 01EA (r1 HP Cpu0Ist 3000 INTL 20050624)
[ 6.082995] ACPI: SSDT 3F7F512A, 01DB (r1 HP Cpu0Cst 3001 INTL 20050624)
[ 6.087181] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 6.087222] processor ACPI_CPU:00: registered as cooling_device4
[ 6.087225] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 6.087580] ACPI: SSDT 3F7F50A5, 0085 (r1 HP Cpu1Cst 3000 INTL 20050624)
[ 6.088157] tick-broadcast: ignoring broadcast for offline CPU #1
[ 6.088269] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 6.088308] processor ACPI_CPU:01: registered as cooling_device5
[ 6.088312] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 6.092285] thermal LNXTHERM:01: registered as thermal_zone0
[ 6.093852] Marking TSC unstable due to TSC halts in idle
[ 6.096251] ACPI: Thermal Zone [TZ0] (59 C)
[ 6.108198] thermal LNXTHERM:02: registered as thermal_zone1
[ 6.116340] ACPI: Thermal Zone [TZ1] (55 C)
[ 6.128376] thermal LNXTHERM:03: registered as thermal_zone2
[ 6.136413] ACPI: Thermal Zone [TZ2] (47 C)
[ 6.142375] thermal LNXTHERM:04: registered as thermal_zone3
[ 6.152519] ACPI: Thermal Zone [TZ3] (28 C)
[ 6.155789] thermal LNXTHERM:05: registered as thermal_zone4
[ 6.161138] ACPI: Thermal Zone [TZ4] (20 C)
[ 7.330139] usbcore: registered new interface driver usbfs
[ 7.330165] usbcore: registered new interface driver hub
[ 7.330190] usbcore: registered new device driver usb
[ 7.346310] uhci_hcd: USB Universal Host Controller Interface driver
[ 7.346364] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.346374] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 7.346378] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 7.346420] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 7.346459] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006020
[ 7.346632] usb usb1: configuration #1 chosen from 1 choice
[ 7.346658] hub 1-0:1.0: USB hub found
[ 7.346664] hub 1-0:1.0: 2 ports detected
[ 7.346774] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 7.346781] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 7.346784] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 7.346803] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 7.346836] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006040
[ 7.346915] usb usb2: configuration #1 chosen from 1 choice
[ 7.346939] hub 2-0:1.0: USB hub found
[ 7.346944] hub 2-0:1.0: 2 ports detected
[ 7.347038] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 7.347044] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 7.347048] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 7.347068] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 7.347101] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006060
[ 7.347182] usb usb3: configuration #1 chosen from 1 choice
[ 7.347208] hub 3-0:1.0: USB hub found
[ 7.347213] hub 3-0:1.0: 2 ports detected
[ 7.347307] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 7.347314] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 7.347317] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 7.347335] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 7.347369] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00006080
[ 7.347449] usb usb4: configuration #1 chosen from 1 choice
[ 7.347473] hub 4-0:1.0: USB hub found
[ 7.347478] hub 4-0:1.0: 2 ports detected
[ 7.366929] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.366933] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 7.366962] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 7.367038] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 7.367042] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 7.367077] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 7.370999] ehci_hcd 0000:00:1d.7: debug port 1
[ 7.371006] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 7.371036] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe8584000
[ 7.391362] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 7.391568] usb usb5: configuration #1 chosen from 1 choice
[ 7.391596] hub 5-0:1.0: USB hub found
[ 7.391607] hub 5-0:1.0: 8 ports detected
[ 7.444664] SCSI subsystem initialized
[ 7.527417] tg3.c:v3.97 (December 10, 2008)
[ 7.527430] tg3 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.532063] tg3 0000:02:0e.0: PME# disabled
[ 7.616094] libata version 3.00 loaded.
[ 7.665808] ata_piix 0000:00:1f.2: version 2.12
[ 7.665828] ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.665834] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 7.665880] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 7.676322] scsi0 : ata_piix
[ 7.694311] scsi1 : ata_piix
[ 7.695019] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[ 7.695022] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[ 7.700026] usb 5-1: new high speed USB device using ehci_hcd and address 2
[ 7.700526] tg3 0000:02:0e.0: firmware: requesting tigon/tg3_tso5.bin
[ 7.774468] tg3: Failed to load firmware "tigon/tg3_tso5.bin"
[ 7.774490] tg3 0000:02:0e.0: PCI INT A disabled
[ 7.774495] tg3: probe of 0000:02:0e.0 failed with error -2
[ 7.774690] ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 7.828080] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e8101000-e81017ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 7.832517] usb 5-1: configuration #1 chosen from 1 choice
[ 7.832669] hub 5-1:1.0: USB hub found
[ 7.832714] hub 5-1:1.0: 3 ports detected
[ 7.856370] ata1.00: ATA-7: FUJITSU MHV2100BH, 892C, max UDMA/100
[ 7.856377] ata1.00: 195371568 sectors, multi 16: LBA48
[ 7.872409] ata1.00: configured for UDMA/100
[ 7.872511] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2100B 892C PQ: 0 ANSI: 5
[ 7.944043] usb 5-4: new high speed USB device using ehci_hcd and address 3
[ 8.036544] ata2.00: ATAPI: MATSHITADVD-RAM UJ-840S, 1.11, max MWDMA2
[ 8.052455] ata2.00: configured for MWDMA2
[ 8.054727] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-840S 1.11 PQ: 0 ANSI: 5
[ 8.070991] Driver 'sd' needs updating - please use bus_type methods
[ 8.071081] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
[ 8.071095] sd 0:0:0:0: [sda] Write Protect is off
[ 8.071097] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.071116] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.071171] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors: (100 GB/93.1 GiB)
[ 8.071182] sd 0:0:0:0: [sda] Write Protect is off
[ 8.071184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 8.071203] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.071207] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 8.079738] usb 5-4: configuration #1 chosen from 1 choice
[ 8.089838] sda1 sda2 < sda5 sda6 > sda3
[ 8.133456] sd 0:0:0:0: [sda] Attached SCSI disk
[ 8.139034] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.139069] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.139619] ------------[ cut here ]------------
[ 8.139622] WARNING: at drivers/ata/libata-sff.c:1017 ata_sff_hsm_move+0x4f4/0x860 [libata]()
[ 8.139625] Hardware name: HP Compaq nc6320 (EY401ET#UUG)
[ 8.139626] Modules linked in: sg sr_mod(+) cdrom sd_mod ata_generic pata_acpi ata_piix ohci1394 libata tg3 libphy ieee1394 scsi_mod ehci_hcd uhci_hcd usbcore thermal processor fan thermal_sys fuse
[ 8.139641] Pid: 1380, comm: udevd Not tainted 2.6.29-rc1 #1
[ 8.139643] Call Trace:
[ 8.139651] [<c012bda9>] warn_slowpath+0x99/0xc0
[ 8.139655] [<c019d807>] do_truncate+0x77/0x90
[ 8.139660] [<c0176b0b>] generic_file_aio_write+0x6b/0xe0
[ 8.139675] [<f811b3e5>] ata_sff_data_xfer32+0x85/0xe0 [libata]
[ 8.139690] [<f811a974>] ata_sff_hsm_move+0x4f4/0x860 [libata]
[ 8.139704] [<f811bdce>] ata_sff_interrupt+0x12e/0x1f0 [libata]
[ 8.139709] [<c0356335>] _spin_lock+0x5/0x10
[ 8.139713] [<c0167bf0>] handle_IRQ_event+0x30/0x60
[ 8.139716] [<c0169716>] handle_edge_irq+0xb6/0x120
[ 8.139719] [<c0104ea3>] do_IRQ+0x43/0x90
[ 8.139722] [<c019e0fc>] sys_close+0x6c/0xc0
[ 8.139724] [<c0103a27>] common_interrupt+0x27/0x30
[ 8.139727] ---[ end trace bd6ccb16d781d807 ]---
[ 8.143089] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 8.143093] Uniform CD-ROM driver Revision: 3.20
[ 8.143167] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.176230] usb 5-1.1: new full speed USB device using ehci_hcd and address 4
[ 8.294329] usb 5-1.1: configuration #1 chosen from 1 choice
[ 8.380119] usb 5-1.2: new full speed USB device using ehci_hcd and address 5
[ 8.452113] usb 5-1.2: device descriptor read/64, error -32
[ 8.527748] PM: Starting manual resume from disk
[ 8.527752] PM: Resume from partition 8:6
[ 8.527753] PM: Checking hibernation image.
[ 8.527988] PM: Resume from disk failed.
[ 8.572875] kjournald starting. Commit interval 5 seconds
[ 8.572891] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.649207] usb 5-1.2: configuration #1 chosen from 1 choice
[ 18.420567] Linux agpgart interface v0.103
[ 18.474430] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 18.474897] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 18.477677] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 18.569587] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 18.646249] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.747667] input: Power Button (FF) as /class/input/input2
[ 18.776157] ACPI: Power Button (FF) [PWRF]
[ 18.776262] input: Sleep Button (CM) as /class/input/input3
[ 18.808172] ACPI: Sleep Button (CM) [C231]
[ 18.808539] ACPI: AC Adapter [C1B2] (on-line)
[ 18.808609] input: Lid Switch as /class/input/input4
[ 18.824178] ACPI: Lid Switch [C22A]
[ 18.959849] ACPI: Battery Slot [C1B4] (battery present)
[ 18.960085] ACPI: Battery Slot [C1B3] (battery absent)
[ 20.161905] input: Video Bus as /class/input/input5
[ 20.192172] ACPI: Video Device [C07F] (multi-head: yes rom: no post: no)
[ 20.323714] tpm_inf_pnp 00:04: Found C1F7 with ID IFX0102
[ 20.323769] tpm_inf_pnp 00:04: TPM found: config base 0x560, data base 0x570, chip version 0x000b, vendor id 0x15d1 (Infineon), product id 0x000b (SLB 9635 TT 1.2)
[ 20.864161] parport_pc 00:03: reported by Plug and Play ACPI
[ 20.864240] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 21.052047] intel_rng: FWH not detected
[ 21.147685] iTCO_vendor_support: vendor-support=0
[ 21.167403] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
[ 21.167518] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 21.167662] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.785191] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30aa]
[ 21.785215] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[ 21.785221] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[ 21.785224] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[ 21.785230] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01a61b22, devctl 0x64
[ 22.016734] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18
[ 22.016739] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[ 22.016743] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 22.016751] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x7000 - 0x7fff
[ 22.016754] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x7000-0x7fff: clean.
[ 22.016972] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe8100000 - 0xe83fffff
[ 22.016975] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
[ 22.063597] tifm_7xx1 0000:02:06.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 22.370231] input: PC Speaker as /class/input/input6
[ 22.847177] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000
[ 22.847183] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 22.886255] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[ 23.496147] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 23.498251] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 23.499095] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 23.499814] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 23.500676] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 24.229432] lp0: using parport0 (interrupt-driven).
[ 24.318981] Adding 1325320k swap on /dev/sda6. Priority:-1 extents:1 across:1325320k
[ 24.850261] EXT3 FS on sda5, internal journal
[ 25.192850] device-mapper: uevent: version 1.0.3
[ 25.193027] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 25.297028] aes_i586: Unknown symbol crypto_it_tab
[ 25.297121] aes_i586: Unknown symbol crypto_aes_set_key
[ 25.297270] aes_i586: Unknown symbol crypto_fl_tab
[ 25.297362] aes_i586: Unknown symbol crypto_il_tab
[ 25.297453] aes_i586: Unknown symbol crypto_ft_tab
[ 25.330458] aes_i586: Unknown symbol crypto_it_tab
[ 25.330551] aes_i586: Unknown symbol crypto_aes_set_key
[ 25.330700] aes_i586: Unknown symbol crypto_fl_tab
[ 25.330791] aes_i586: Unknown symbol crypto_il_tab
[ 25.330882] aes_i586: Unknown symbol crypto_ft_tab
[ 26.336872] kjournald starting. Commit interval 5 seconds
[ 26.337337] EXT3 FS on sda3, internal journal
[ 26.337345] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.795061] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.668937] RPC: Registered udp transport module.
[ 28.668941] RPC: Registered tcp transport module.
[ 31.592948] NET: Registered protocol family 10
[ 31.593386] lo: Disabled Privacy Extensions
[ 31.792877] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 31.911731] apm: BIOS not found.
[ 32.048465] ppdev: user-space parallel port driver
[ 32.769625] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 32.978932] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 32.989452] NFSD: starting 90-second grace period
[ 34.474579] Bluetooth: Core ver 2.14
[ 34.474659] NET: Registered protocol family 31
[ 34.474663] Bluetooth: HCI device and connection manager initialized
[ 34.474668] Bluetooth: HCI socket layer initialized
[ 34.523530] Bluetooth: L2CAP ver 2.11
[ 34.523535] Bluetooth: L2CAP socket layer initialized
[ 34.636962] Bluetooth: RFCOMM socket layer initialized
[ 34.636978] Bluetooth: RFCOMM TTY layer initialized
[ 34.636981] Bluetooth: RFCOMM ver 1.10
[ 38.528552] [drm] Initialized drm 1.1.0 20060810
[ 38.932072] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 38.932081] pci 0000:00:02.0: setting latency timer to 64
[ 38.935517] [drm] Initialized i915 1.6.0 20080730 on minor 0
[ 39.994306] evdev.c(EVIOCGBIT): Suspicious buffer size 511, limiting output to 64 bytes. See http://userweb.kernel.org/~dtor/eviocgbit-bug.html
[ 57.178469] [drm:i915_get_vblank_counter] *ERROR* trying to get vblank count for disabled pipe 0
[ 63.982097] CPU0 attaching NULL sched-domain.
[ 64.000064] CPU0 attaching NULL sched-domain.
[ 111.760615] tg3.c:v3.97 (December 10, 2008)
[ 111.760632] tg3 0000:02:0e.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 111.768080] tg3 0000:02:0e.0: PME# disabled
[ 111.801326] tg3 0000:02:0e.0: firmware: requesting tigon/tg3_tso5.bin
[ 111.871531] eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:15:60:cb:c0:d1
[ 111.871539] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0])
[ 111.871544] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 111.871549] eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
[ 111.908996] tg3 0000:02:0e.0: PME# disabled
[ 112.202902] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 115.479629] tg3: eth0: Link is up at 1000 Mbps, full duplex.
[ 115.479635] tg3: eth0: Flow control is on for TX and on for RX.
[ 115.480648] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 117.698244] NET: Registered protocol family 17
[ 121.733390] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 121.733403] CIFS VFS: Send error in SessSetup = -13
[ 121.733416] CIFS VFS: cifs_mount failed w/return code = -13
[ 121.775192] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 121.775205] CIFS VFS: Send error in SessSetup = -13
[ 121.775218] CIFS VFS: cifs_mount failed w/return code = -13
[ 121.829106] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 121.829120] CIFS VFS: Send error in SessSetup = -13
[ 121.829133] CIFS VFS: cifs_mount failed w/return code = -13
[ 121.854123] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE
[ 121.854135] CIFS VFS: Send error in SessSetup = -13
[ 121.854147] CIFS VFS: cifs_mount failed w/return code = -13
[ 131.928023] eth0: no IPv6 routers present
next reply other threads:[~2009-01-13 14:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-13 14:03 Denis Joseph Barrow [this message]
2009-01-13 14:13 ` possible problem with tg3.c not loading firmware Oliver Hartkopp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=496C9F4D.7080101@option.com \
--to=d.barow@option.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.