From: Aaron Theodore <aaron@bat.id.au>
To: linux-media@vger.kernel.org
Subject: Re: kernel soft lockup on boot loading cx2388x based DVB-S card (TeVii S420)
Date: Fri, 16 Jan 2009 18:05:51 +1100 [thread overview]
Message-ID: <497031CF.9060703@bat.id.au> (raw)
In-Reply-To: <17229660.2191232079572873.JavaMail.root@ado-01>
Horay my TeVii DVB-S S420 is now working,
only thing now is to work out why it wont load on boot before my DVB-T card
On 16/01/2009 3:19 PM, Aaron Theodore wrote:
> I tried:
> make rmmod
> make rminstall
>
> Although there were still some drivers left over from "tevii_linuxdriver_0815"
>
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s600.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s650.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36067.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36060.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36050.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/saa7134/saa7134-oss.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36016.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/tuner-3036.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/videocodec.ko
> /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/dpc7146.ko
>
> so i just removed manually and rebooted.
> Same issue occurred on reboot.
>
> So i thought to try manually unloading and reloading the module
>
>
> barry:~# rmmod cx8802
> barry:~# modprobe cx8802
>
> kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
> kernel: cx88[0]/2: cx2388x 8802 Driver Manager
> kernel: ACPI: PCI Interrupt 0000:05:08.2[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
> kernel: cx88[0]/2: found at 0000:05:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xd9000000
> kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded
> kernel: cx88/2: registering cx8802 driver, type: dvb access: shared
> kernel: cx88[0]/2: subsystem: d420:9022, board: TeVii S420 DVB-S [card=73]
> kernel: cx88[0]/2: cx2388x based DVB/ATSC card
> kernel: cx8802_alloc_frontends() allocating 1 frontend(s)
> kernel: DVB: registering new adapter (cx88[0])
> kernel: DVB: registering adapter 2 frontend 0 (ST STV0288 DVB-S)...
>
>
> This time it makes the devices in /dev/dvb/
> Now unfortunately i can't test to see if it can actually Tune until a few hours time when i get home (i think i forgot to plug my satellite cable back in!)
>
> Will report back later
>
>
> Can i change the load order of kernel modules, it dosnt seem to like being loaded before my other dvb modules
>
>
> Aaron
>
>
> ----- "Mauro Carvalho Chehab" <mchehab@infradead.org> wrote:
>
>
>> On Fri, 16 Jan 2009 06:56:05 +1100
>> Aaron Theodore <aaron@bat.id.au> wrote:
>>
>>
>>> Mauro,
>>>
>>> Thanks for the speedy patch!
>>>
>> You should thanks to Andy. He is the author of this patch ;)
>>
>>
>>> My system can at least boot now, but has issues loading the
>>>
>> frontend.
>>
>>> DVB: Unable to find symbol stv0299_attach()
>>> DVB: Unable to find symbol stv0288_attach()
>>>
>> It seems that you didn't compile those two frontends.
>>
>> Cheers,
>> Mauro
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2009-01-16 7:08 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <18887012.2171232079363334.JavaMail.root@ado-01>
2009-01-16 4:19 ` kernel soft lockup on boot loading cx2388x based DVB-S card (TeVii S420) Aaron Theodore
2009-01-16 7:05 ` Aaron Theodore [this message]
2009-01-15 10:35 Aaron Theodore
2009-01-15 11:25 ` Alec Christie
2009-01-15 15:55 ` Mauro Carvalho Chehab
[not found] ` <496F94D5.9060206@bat.id.au>
2009-01-15 23:18 ` Mauro Carvalho Chehab
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=497031CF.9060703@bat.id.au \
--to=aaron@bat.id.au \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.