From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167]:37201 "EHLO mail.kapsi.fi" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757053AbZAQRlh (ORCPT ); Sat, 17 Jan 2009 12:41:37 -0500 Message-ID: <4972184D.3000709@iki.fi> Date: Sat, 17 Jan 2009 19:41:33 +0200 From: Antti Palosaari MIME-Version: 1.0 To: Jochen Friedrich CC: Detlef Rohde , Roberto Ragusa , linux-media@vger.kernel.org Subject: Re: MC44S803 frontend (it works) References: <4936FF66.3020109@robertoragusa.it> <494C0002.1060204@scram.de> <49623372.90403@robertoragusa.it> <4965327A.5000605@t-online.de> <496CD4C8.50004@t-online.de> <496E2C6B.3050607@scram.de> <496E2FB5.4080406@scram.de> <4971367E.90504@iki.fi> <4971AE26.9070901@t-online.de> <4971B278.8010804@iki.fi> <4971B4F6.1020407@scram.de> In-Reply-To: <4971B4F6.1020407@scram.de> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: Hi Jochen, Jochen Friedrich wrote: > This version works OK for me :-). The old version also worked, but was very insensitive (i only received one > transponder instead of 6, i guess this GPIO must switch on some RF-amplifyer or so). Yes, you are correct. I also ensured that from TerraTec provided driver. I moved af9015_i2c_xfer() things back as I now think those are enough general. If driver now works, and you are also happy for af9015 changes I did, af9015 changes are fine for me too. Could you look and make fast test all are ok? PS. If you want remote working then send AF15IRTBL.bin (or USB-sniff) to me. From file I can look correct IR-codes for your remote control and after those are set it is rather easy to add key bindings for button events. This same apply all AF9015 devices, I am happy to add remotes too. regards Antti -- http://palosaari.fi/