From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joseph Cheek Date: Tue, 20 Jan 2009 15:37:37 -0500 Subject: [ath9k-devel] loss of connectivity after large file transfer In-Reply-To: <20090120202145.GH19581@tesla> References: <57ed08da0901191656r7996b013g3a14d6a0b49b9daf@mail.gmail.com> <57ed08da0901201122n2320cecek9d2d727a7a0234fe@mail.gmail.com> <49762E12.8090800@cheek.com> <20090120202145.GH19581@tesla> Message-ID: <49763611.1050409@cheek.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hi Luis, comments below... Thanks! Joseph Cheek Luis R. Rodriguez wrote: > On Tue, Jan 20, 2009 at 12:03:30PM -0800, Joseph Cheek wrote: > >> Now if I could just get my cards to maintain IP connectivity when large >> files are transferred! luis, any luck reproducing my problems? i can >> give you ssh access to either of my boxes if you need it 8-). >> > > you are asking about a separate issue on a different thread from which > I cannot easily pull your distribution info, kernel version, AP used, etc, > but whatever, lets hijack this thread and abuse it to talk about your issue, > I'm lazy to switch to the other one. > ouch! hope the rest of your day goes better 8-). > FWIW I am able to reproduce loss of connectivity after a large file transfer > awesome, glad to hear it! > If you are experiencing issues as you mention on 2.6.28 then you need at least > 2.6.28.1 as it has the patch, "ath9k: enable RXing of beacons on STA/IBSS", which > should fix the issue. > I was using 2.6.27 as 2.6.28 was giving me a 32KB/s max transfer rate. I'll try 2.6.28.1 and report back to you.