[lm-sensors] PATCH: i2c-i801-dmi-detect-fsc-chips.patch

[Hans de Goede <j.w.r.degoede@hhs.nl>]

[-- Attachment #1: Type: text/plain, Size: 424 bytes --]

Hi Jean,

This is a new version of the i2c-i801-dmi-detect-fscsyl.patch, renamed to 
reflect that it now DMI detects other FSC chips too.

This patch adds support to the i2c-i801.c driver for i2c slave enumeration on
the basis of the motherboard dmi tables onboard table. And uses this support
to detect the presense of an FSC Hermes, Hades or Syleus IC

Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Regards,

Hans



[-- Attachment #2: i2c-i801-dmi-detect-fsc-chips.patch --]
[-- Type: text/plain, Size: 4520 bytes --]

This patch adds support to the i2c-i801.c driver for i2c slave enumeration on
the basis of the motherboard dmi tables onboard table. And uses this support
to detect the presense of an FSC Hermes, Hades or Syleus IC

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
--- linux/drivers/i2c/busses/i2c-i801.c	2009-01-18 23:11:44.000000000 +0100
+++ linux/drivers/i2c/busses/i2c-i801.c	2009-01-18 23:14:49.000000000 +0100
@@ -65,6 +65,7 @@
 #include <linux/i2c.h>
 #include <linux/acpi.h>
 #include <linux/io.h>
+#include <linux/dmi.h>
 
 /* I801 SMBus address offsets */
 #define SMBHSTSTS	(0 + i801_smba)
@@ -136,6 +137,10 @@
 #define FEATURE_I2C_BLOCK_READ	(1 << 3)
 static unsigned int i801_features;
 
+static int i2c_devs_found;
+static unsigned short i2c_devs_addresses[4];
+static char i2c_devs_types[4][I2C_NAME_SIZE];
+
 /* Make sure the SMBus host is ready to start transmitting.
    Return 0 if it is, -EBUSY if it is not. */
 static int i801_check_pre(void)
@@ -584,8 +589,6 @@
 MODULE_DEVICE_TABLE (pci, i801_ids);
 
 #if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
-static unsigned char apanel_addr;
-
 /* Scan the system ROM for the signature "FJKEYINF" */
 static __init const void __iomem *bios_signature(const void __iomem *bios)
 {
@@ -609,7 +612,9 @@
 	p = bios_signature(bios);
 	if (p) {
 		/* just use the first address */
-		apanel_addr = readb(p + 8 + 3) >> 1;
+		i2c_devs_addresses[0] = readb(p + 8 + 3) >> 1;
+		strlcpy(i2c_devs_types[0], "fujitsu_apanel", I2C_NAME_SIZE);
+		i2c_devs_found = 1;
 	}
 	iounmap(bios);
 }
@@ -617,10 +622,84 @@
 static void __init input_apanel_init(void) {}
 #endif
 
+#if defined CONFIG_SENSORS_FSCHMD || defined CONFIG_SENSORS_FSCHMD_MODULE
+struct dmi_onboard_device_info {
+	const char *name;
+	u8 type;
+	unsigned short i2c_addr;
+	const char *i2c_type;
+};
+
+static struct dmi_onboard_device_info dmi_devices[] = {
+	{ "Hermes", DMI_DEV_TYPE_OTHER, 0x73, "fscher" },
+	{ "Hades",  DMI_DEV_TYPE_OTHER, 0x73, "fschds" },
+	{ "Syleus", DMI_DEV_TYPE_OTHER, 0x73, "fscsyl" },
+};
+
+static void dmi_check_onboard_device(u8 type, const char *name)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dmi_devices); i++) {
+		/* & ~0x80, ignore enabled/disabled bit */
+		if ((type & ~0x80) != dmi_devices[i].type)
+			continue;
+		if (strcmp(name, dmi_devices[i].name))
+			continue;
+
+		if (i2c_devs_found + 1 == ARRAY_SIZE(i2c_devs_addresses)) {
+			printk(KERN_WARNING "Warning size of i2c_devs array "
+				"is too small please report this!");
+			return;
+		}
+
+		i2c_devs_addresses[i2c_devs_found] = dmi_devices[i].i2c_addr;
+		strlcpy(i2c_devs_types[i2c_devs_found],
+			dmi_devices[i].i2c_type, I2C_NAME_SIZE);
+		i2c_devs_found++;
+		return;
+	}
+}
+
+/* We use our own function to check for onboard devices instead of
+   dmi_find_device() as some buggy BIOS's have the devices we are interested
+   in marked as disabled */
+static void dmi_check_onboard_devices(const struct dmi_header *dm)
+{
+	int i, count = (dm->length - sizeof(struct dmi_header)) / 2;
+
+	if (dm->type != 10)
+		return;
+
+	for (i = 0; i < count; i++) {
+		const u8 *d = (char *)(dm + 1) + (i * 2);
+		const char *name = ((char *) dm) + dm->length;
+		u8 type = d[0];
+		u8 s = d[1];
+
+		if (!s)
+			continue;
+		s--;
+		while (s > 0 && name[0]) {
+			name += strlen(name) + 1;
+			s--;
+		}
+		dmi_check_onboard_device(type, name);
+	}
+}
+
+static void __init dmi_onboard_devices_init(void)
+{
+	dmi_walk(dmi_check_onboard_devices);
+}
+#else
+static void __init dmi_onboard_devices_init(void) {}
+#endif
+
 static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	unsigned char temp;
-	int err;
+	int i, err;
 
 	I801_dev = dev;
 	i801_features = 0;
@@ -703,16 +782,16 @@
 	}
 
 	/* Register optional slaves */
-#if defined CONFIG_INPUT_APANEL || defined CONFIG_INPUT_APANEL_MODULE
-	if (apanel_addr) {
+	for (i = 0; i < i2c_devs_found; i++) {
 		struct i2c_board_info info;
 
 		memset(&info, 0, sizeof(struct i2c_board_info));
-		info.addr = apanel_addr;
-		strlcpy(info.type, "fujitsu_apanel", I2C_NAME_SIZE);
+		info.addr = i2c_devs_addresses[i];
+		strlcpy(info.type, i2c_devs_types[i], I2C_NAME_SIZE);
 		i2c_new_device(&i801_adapter, &info);
+		dev_err(&dev->dev, "Added slave device: %s @ %02x",
+			info.type, (int)info.addr);
 	}
-#endif
 
 	return 0;
 
@@ -765,6 +844,7 @@
 static int __init i2c_i801_init(void)
 {
 	input_apanel_init();
+	dmi_onboard_devices_init();
 	return pci_register_driver(&i801_driver);
 }
 

[-- Attachment #3: Type: text/plain, Size: 153 bytes --]

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors