All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yves Le Feuvre <yves.lefeuvre@inserm.fr>
To: video4linux-list@redhat.com
Subject: asus Europa2 OEM regression ?
Date: Fri, 23 Jan 2009 09:04:15 +0100	[thread overview]
Message-ID: <497979FF.5090600@inserm.fr> (raw)

Hi,

I have two DVB cards, an Hauppauge Nova-T DVB-T [card=18,autodetected], 
and a Asus Europa2 OEM [card=100,autodetected].
Both cards are working fine on fedora 7 (kernel 2.6.22.9), but the Asus 
Europa doesn't work anymore on latest fedora 10 or ubuntu 8.10. I have 
to say that I have tested only the DVB-T part, as I don't use the cards 
for analog TV or radio.
If there is any way i can help to solve the problem ?

regards

Yves


Here is what dmesg is saying for both


fedora 7
[...]
Linux video capture interface: v2.00
usb 5-2: reset high speed USB device using ehci_hcd and address 2
cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
CORE cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T 
[card=18,autodetected]
TV tuner 4 at 0x1fe, Radio tuner -1 at 0x1fe
cx2388x v4l2 driver version 0.0.6 loaded
phy0: Selected rate control algorithm 'simple'
tveeprom 1-0050: Hauppauge model 90002, rev C176, serial# 238840
tveeprom 1-0050: MAC address is 00-0D-FE-03-A4-F8
tveeprom 1-0050: tuner model is Thompson DTT7592 (idx 76, type 4)
tveeprom 1-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 1-0050: audio processor is None (idx 0)
tveeprom 1-0050: decoder processor is CX882 (idx 25)
tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=90002
input: cx88 IR (Hauppauge Nova-T DVB-T as /class/input/input3
cx88[0]/2: cx2388x 8802 Driver Manager
ACPI: PCI Interrupt 0000:02:05.2[A] -> GSI 17 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:02:05.2, rev: 5, irq: 21, latency: 32, mmio: 
0xf8000000
ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 17 (level, low) -> IRQ 21
cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 21, latency: 32, mmio: 
0xf6000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1b.0 to 64
zd1211rw_mac80211 5-2:1.0: phy0
usbcore: registered new interface driver zd1211rw_mac80211
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
cx2388x dvb driver version 0.0.6 loaded
cx8802_register_driver() ->registering driver type=dvb access=shared
CORE cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
cx88[0]/2: cx2388x based dvb card
DVB: registering new adapter (cx88[0]).
DVB: registering frontend 0 (Conexant CX22702 DVB-T)...
[...]
saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM 
[card=100,autodetected]
saa7134[0]: board init: gpio is 0
saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner 5-0043: chip found @ 0x86 (saa7134[0])
tda9887 5-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 5-0061: chip found @ 0xc2 (saa7134[0])
tuner 5-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
tuner 5-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
saa7134[0]: registered device video1 [v4l2]
saa7134[0]: registered device vbi1
saa7134[0]: registered device radio0
DVB: registering new adapter (saa7134[0]).
DVB: registering frontend 1 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok
[...]




fedora 10
[...]

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
saa7134[0]: found at 0000:02:04.0, rev: 1, irq: 16, latency: 32, mmio: 
0xf9ffe000
saa7134[0]: subsystem: 1043:4860, board: Asus Europa2 OEM 
[card=100,autodetected]
saa7134[0]: board init: gpio is 0
saa7134[0]: i2c eeprom 00: 43 10 60 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 20: 01 40 01 03 03 02 03 04 08 ff 00 4c ff ff ff ff
saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 0d 01 ff ff ff ff ff ff
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ppdev: user-space parallel port driver
usb 1-2: reset high speed USB device using ehci_hcd and address 2
nvidia: module license 'NVIDIA' taints kernel.
phy0: Selected rate control algorithm 'pid'
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
firewire_ohci 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
firewire_ohci: Added fw-ohci device 0000:02:01.0, OHCI version 1.0
NVRM: loading NVIDIA UNIX x86 Kernel Module  180.22  Tue Jan  6 09:29:08 
PST 2009
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
cx8800 0000:02:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
cx88[0]: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T 
[card=18,autodetected]
cx88[0]: TV tuner type 4, Radio tuner type -1
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
tveeprom 2-0050: Hauppauge model 90002, rev C176, serial# 238840
tveeprom 2-0050: MAC address is 00-0D-FE-03-A4-F8
tveeprom 2-0050: tuner model is Thompson DTT7592 (idx 76, type 4)
tveeprom 2-0050: TV standards ATSC/DVB Digital (eeprom 0x80)
tveeprom 2-0050: audio processor is None (idx 0)
tveeprom 2-0050: decoder processor is CX882 (idx 25)
tveeprom 2-0050: has no radio, has IR receiver, has no IR transmitter
cx88[0]: hauppauge eeprom: model=90002
input: cx88 IR (Hauppauge Nova-T DVB-T as 
/devices/pci0000:00/0000:00:1e.0/0000:02:05.0/input/input6
cx88[0]/0: found at 0000:02:05.0, rev: 5, irq: 17, latency: 32, mmio: 
0xf6000000
cx88[0]/0: registered device video1 [v4l2]
cx88[0]/0: registered device vbi1
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:02:05.2: PCI INT A -> GSI 17 (level, low) 
-> IRQ 17
cx88[0]/2: found at 0000:02:05.2, rev: 5, irq: 17, latency: 32, mmio: 
0xf8000000
zd1211rw 1-2:1.0: phy0
usbcore: registered new interface driver zd1211rw
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
DVB: registering new adapter (saa7134[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 53MHz sampling clock
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4 
(0x14/0x15/0x16/0x17/0x0)
ALSA sound/pci/hda/hda_codec.c:3025:    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3029:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_codec.c:3030:    mono: mono_out=0x0
ALSA sound/pci/hda/hda_codec.c:3038:    inputs: mic=0x18, fmic=0x19, 
line=0x1a, fline=0x0, cd=0x1c, aux=0x0
tda1004x: found firmware revision 29 -- ok
cx88/2: cx2388x dvb driver version 0.0.6 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: 0070:9002, board: Hauppauge Nova-T DVB-T [card=18]
cx88[0]/2: cx2388x based DVB/ATSC card
DVB: registering new adapter (cx88[0])
DVB: registering frontend 1 (Conexant CX22702 DVB-T)...
firewire_core: created device fw0: GUID 0011d800006cad14, S400
device-mapper: multipath: version 1.0.5 loaded
[...]
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok
saa7134[0]/irq[10,-151591]: r=0x20 s=0x00 PE
saa7134[0]/irq: looping -- clearing PE (parity error!) enable bit
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok
tda1004x: setting up plls for 53MHz sampling clock
tda1004x: found firmware revision 29 -- ok

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

             reply	other threads:[~2009-01-23  8:07 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-23  8:04 Yves Le Feuvre [this message]
2009-01-23  8:18 ` asus Europa2 OEM regression ? Yves Le Feuvre
2009-01-27  7:57   ` Yves Le Feuvre
2009-01-24  0:08 ` hermann pitton
2009-01-26  8:18   ` Yves Le Feuvre
2009-01-28 21:48     ` hermann pitton
2009-01-30  8:11       ` Yves Le Feuvre
2009-01-31  1:41         ` hermann pitton
2009-02-04 14:38         ` Yves Le Feuvre
2009-02-06  1:54           ` hermann pitton
2009-02-06  2:10             ` hermann pitton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=497979FF.5090600@inserm.fr \
    --to=yves.lefeuvre@inserm.fr \
    --cc=video4linux-list@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.