All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Retanubun <RichardRetanubun@RuggedCom.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 05/07] Coldfire: M5271EVB: Board header update (has dependencies)
Date: Fri, 23 Jan 2009 17:08:44 -0500	[thread overview]
Message-ID: <497A3FEC.30405@RuggedCom.com> (raw)

Cleanup for M5271EVB:
Added clarification on the use of CONFIG_SYS_CLOCK.
Modified to use u-boot's HUSH parser.
Cleanup on environment settings.

Dependencies:
Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
This depends on a patch to include/asm-m68k/m5271.h
that defines the multiplier and divider ratios.

Removed the definition of CONFIG_SYS_FECI2C.
This depends on a patch that removes the use of it in
cpu/mcf52x2/cpu_init.c

Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
---
This patch depends on:
Added the use of CONFIG_SYS_MCF_SYNCR for clock multiplier.
This depends on a patch to include/asm-m68k/m5271.h
that defines the multiplier and divider ratios.

Removed the definition of CONFIG_SYS_FECI2C.
This depends on a patch that removes the use of it in
cpu/mcf52x2/cpu_init.c

  include/configs/M5271EVB.h |   35 +++++++++++++++++++++++------------
  1 files changed, 23 insertions(+), 12 deletions(-)

diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index 7ddeb55..b8eb156 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -82,11 +82,14 @@
  #define CONFIG_CMD_MISC

  #undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMDLINE_EDITING	1 /* enables command line history */
+#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

  #define CONFIG_MCFFEC
  #ifdef CONFIG_MCFFEC
-#	define CONFIG_NET_MULTI		1
+#	define CONFIG_NET_MULTI		0
  #	define CONFIG_MII		1
  #	define CONFIG_MII_INIT		1
  #	define CONFIG_SYS_DISCOVER_PHY
@@ -116,7 +119,7 @@
  #define CONFIG_SYS_I2C_OFFSET		0x00000300
  #define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR

-#define CONFIG_BOOTDELAY	1	/* autoboot after 5 seconds */
+#define CONFIG_BOOTDELAY	1	/* autoboot after 1 seconds */
  #define CONFIG_BOOTFILE		"u-boot.bin"
  #ifdef CONFIG_MCFFEC
  #	define CONFIG_NET_RETRY_COUNT	5
@@ -128,16 +131,16 @@
  #	define CONFIG_OVERWRITE_ETHADDR_ONCE
  #endif				/* FEC_ENET */

-#define CONFIG_HOSTNAME		M5235EVB
+#define CONFIG_HOSTNAME		M5271EVB
  #define CONFIG_EXTRA_ENV_SETTINGS		\
  	"netdev=eth0\0"				\
  	"loadaddr=10000\0"			\
-	"u-boot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"uboot=u-boot.bin\0"		\
+	"load=tftp $loadaddr $uboot\0"	\
  	"upd=run load; run prog\0"		\
-	"prog=prot off ffe00000 ffe2ffff;"		\
-	"era ffe00000 ffe2ffff;"				\
-	"cp.b ${loadaddr} 0 ${filesize};"	\
+	"prog=prot off ffe00000 ffe3ffff;"	\
+	"era ffe00000 ffe3ffff;"		\
+	"cp.b $loadaddr ffe00000 $filesize;"	\
  	"save\0"				\
  	""

@@ -159,7 +162,18 @@
  #define CONFIG_SYS_MEMTEST_END		0x380000

  #define CONFIG_SYS_HZ			1000000
+
+/* Clock configuration
+ * The external oscillator is a 25.000 MHz
+ * CONFIG_SYS_CLK for ColdFire V2 sets cpu_clk (not bus_clk)
+ * bus_clk = (cpu_clk/2) (fixed ratio)
+ *
+ * If CONFIG_SYS_CLK is changed. the CONFIG_SYS_MCF_SYNCR must be updated to
+ * match the new clock speed. Max cpu_clk is 150 MHz.
+ */
  #define CONFIG_SYS_CLK			100000000
+#define CONFIG_SYS_MCF_SYNCR 	(CONFIG_SYS_MCF_SYNCR_MFD_4X | \
+				CONFIG_SYS_MCF_SYNCR_RFD_DIV1)

  /*
   * Low Level Configuration Settings
@@ -216,7 +230,4 @@
  /* Cache Configuration */
  #define CONFIG_SYS_CACHELINE_SIZE	16

-/* Port configuration */
-#define CONFIG_SYS_FECI2C		0xF0
-
  #endif				/* _M5271EVB_H */
-- 
1.5.6.5

             reply	other threads:[~2009-01-23 22:08 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-23 22:08 Richard Retanubun [this message]
2009-02-04 15:10 ` [U-Boot] [PATCH 05/07 V2] Coldfire: M5271EVB: Board header update (dependencies) Richard Retanubun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=497A3FEC.30405@RuggedCom.com \
    --to=richardretanubun@ruggedcom.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.