All of lore.kernel.org
 help / color / mirror / Atom feed
From: Randy Dunlap <randy.dunlap@oracle.com>
To: Richard Holden <aciddeath@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>,
	linux-next@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>,
	"rdreier@cisco.com" <rdreier@cisco.com>,
	Eric Van Hensbergen <ericvh@gmail.com>
Subject: [patch -next] 9pnet_rdma build error
Date: Fri, 23 Jan 2009 15:00:31 -0800	[thread overview]
Message-ID: <497A4C0F.6050303@oracle.com> (raw)
In-Reply-To: <497A3ABD.5060708@gmail.com>

Richard Holden wrote:
> Stephen Rothwell wrote:
>> Hi all,
>>
>> News:  I will be on leave next week, so there will probably be no
>> linux-next release until Feb 2.
> 
> Error in net/9p caused by CONFIG_NET_9P =y and CONFIG_NET_9P_RDMA=m:
> CONFIG_NET_9P_RDMA is tristate, depending on infiniband which is a module.
> 
> Config and log attached.
> ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined!
> ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined!
> ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined!
> ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined!
> ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined!
> ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined!
> ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined!

Here is one possible patch for this.


From: Randy Dunlap <randy.dunlap@oracle.com>

SUNRPC_XPRT_RDMA uses Infiniband RDMA support, so make it depend on
that kconfig symbol for clean builds.

net/built-in.o: In function `rpcrdma_ep_disconnect':
(.text+0x9c2a8): undefined reference to `rdma_disconnect'
net/built-in.o: In function `rpcrdma_create_id':
verbs.c:(.text+0x9c39f): undefined reference to `rdma_create_id'
verbs.c:(.text+0x9c3e3): undefined reference to `rdma_resolve_addr'
verbs.c:(.text+0x9c439): undefined reference to `rdma_resolve_route'
verbs.c:(.text+0x9c482): undefined reference to `rdma_destroy_id'
net/built-in.o: In function `rpcrdma_ep_destroy':
(.text+0x9c84d): undefined reference to `rdma_destroy_qp'
net/built-in.o: In function `rpcrdma_ia_close':
(.text+0x9cb44): undefined reference to `rdma_destroy_qp'
net/built-in.o: In function `rpcrdma_ia_close':
(.text+0x9cb4b): undefined reference to `rdma_destroy_id'
net/built-in.o: In function `rpcrdma_ia_open':
(.text+0x9cdb4): undefined reference to `rdma_destroy_id'
net/built-in.o: In function `rpcrdma_ep_connect':
(.text+0x9d2dd): undefined reference to `rdma_destroy_id'
net/built-in.o: In function `rpcrdma_ep_connect':
(.text+0x9d2eb): undefined reference to `rdma_destroy_qp'
net/built-in.o: In function `rpcrdma_ep_connect':
(.text+0x9d2f8): undefined reference to `rdma_destroy_id'
net/built-in.o: In function `rpcrdma_ep_connect':
(.text+0x9d319): undefined reference to `rdma_create_qp'
net/built-in.o: In function `rpcrdma_ep_connect':
(.text+0x9d3e0): undefined reference to `rdma_connect'
net/built-in.o: In function `svc_rdma_detach':
svc_rdma_transport.c:(.text+0x9ddbb): undefined reference to `rdma_disconnect'
net/built-in.o: In function `__svc_rdma_free':
svc_rdma_transport.c:(.text+0x9f041): undefined reference to `rdma_destroy_id'
net/built-in.o: In function `svc_rdma_accept':
svc_rdma_transport.c:(.text+0x9f362): undefined reference to `rdma_create_qp'
svc_rdma_transport.c:(.text+0x9f388): undefined reference to `rdma_create_qp'
svc_rdma_transport.c:(.text+0x9f553): undefined reference to `rdma_accept'
svc_rdma_transport.c:(.text+0x9f682): undefined reference to `rdma_destroy_id'
net/built-in.o: In function `svc_rdma_create':
svc_rdma_transport.c:(.text+0x9f70e): undefined reference to `rdma_create_id'
svc_rdma_transport.c:(.text+0x9f739): undefined reference to `rdma_bind_addr'
svc_rdma_transport.c:(.text+0x9f762): undefined reference to `rdma_listen'
svc_rdma_transport.c:(.text+0x9f79e): undefined reference to `rdma_destroy_id'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc:      J. Bruce Fields <bfields@fieldses.org>
cc:      Trond Myklebust <Trond.Myklebust@netapp.com>
cc:      Roland Dreier <rolandd@cisco.com>
---
 fs/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- linux-next-20090121.orig/fs/Kconfig
+++ linux-next-20090121/fs/Kconfig
@@ -1405,7 +1405,7 @@ config SUNRPC_GSS
 
 config SUNRPC_XPRT_RDMA
 	tristate
-	depends on SUNRPC && INFINIBAND && EXPERIMENTAL
+	depends on SUNRPC && INFINIBAND && INFINIBAND_ADDR_TRANS && EXPERIMENTAL
 	default SUNRPC && INFINIBAND
 	help
 	  This option allows the NFS client and server to support

-- 
~Randy

      reply	other threads:[~2009-01-23 23:00 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-23  7:48 linux-next: Tree for January 23 Stephen Rothwell
2009-01-23 20:34 ` linux-next: Tree for January 23 (kvm) Randy Dunlap
2009-01-28  9:51   ` Andrew Morton
2009-01-28 10:20     ` Alexander Graf
     [not found]       ` <20090128142616.GA4344@amt.cnet>
2009-01-28 20:44         ` Andrew Morton
2009-02-04 13:55   ` Avi Kivity
2009-01-23 21:03 ` [PATCH] kmemtrace: fix printk format warnings Randy Dunlap
2009-01-23 21:21 ` linux-next: Tree for January 23 (drivers/watchdog/cpwd.c:411: error: 'inode' undeclared (first use in this function)) Alexey Dobriyan
2009-01-23 21:46 ` linux-next: Tree for January 23 (9pnet_rdma) Richard Holden
2009-01-23 23:00   ` Randy Dunlap [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=497A4C0F.6050303@oracle.com \
    --to=randy.dunlap@oracle.com \
    --cc=aciddeath@gmail.com \
    --cc=ericvh@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-next@vger.kernel.org \
    --cc=rdreier@cisco.com \
    --cc=sfr@canb.auug.org.au \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.