From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lars Hardy Date: Tue, 27 Jan 2009 03:20:04 +0100 Subject: [ath9k-devel] ath9k regulatory Message-ID: <497E6F54.60500@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Hi. Im using a Athereos mini-pci card (AR5416-AC1A VL4668.1C). (in a mini pci/pci adapter) Its used with hostap as my AP. After the resent regulatory domain changes, I cannot enable 802.11a anymore. So it seems that its the same issue, its the eeprom on the card/.?/ Here is my dmesg utput after modprobe / iw reg set NO: cfg80211: Calling CRDA to update world regulatory domain ath9k: 0.1 ath9k 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 ath9k: Country alpha2 being used: 00 Regpair detected: 0x64 wmaster0 (ath9k): not using net_device_ops yet phy0: Selected rate control algorithm 'ath9k_rate_control' wlan0 (ath9k): not using net_device_ops yet Registered led device: ath9k-phy0:radio Registered led device: ath9k-phy0:assoc Registered led device: ath9k-phy0:tx Registered led device: ath9k-phy0:rx phy0: Atheros AR5416 MAC/BB Rev:2 AR5133 RF Rev:81: mem=0xf8220000, irq=18 cfg80211: Calling CRDA for country: NO ath9k 0000:01:0a.0: PCI INT A disabled ath9k: Driver unloaded cfg80211: Calling CRDA to update world all-purpose ath9k: 0.1 ath9k 0000:01:0a.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18 ath9k: Country alpha2 being used: 00 Regpair detected: 0x64 wmaster0 (ath9k): not using net_device_ops yet phy0: Selected rate control algorithm 'ath9k_rate_control' wlan0 (ath9k): not using net_device_ops yet Registered led device: ath9k-phy0:radio Registered led device: ath9k-phy0:assoc Registered led device: ath9k-phy0:tx Registered led device: ath9k-phy0:rx phy0: Atheros AR5416 MAC/BB Rev:2 AR5133 RF Rev:81: mem=0xf81c0000, irq=18 root at UbuntuRuter:/usr/src/wireless-testing# iw --debug reg set NO -- Debug: Received Message: -------------------------- BEGIN NETLINK MESSAGE --------------------------- [HEADER] 16 octets .nlmsg_len = 36 .nlmsg_type = 2 .nlmsg_flags = 0 <> .nlmsg_seq = 1233019334 .nlmsg_pid = 5516 [ERRORMSG] 20 octets .error = 0 "Success" [ORIGINAL MESSAGE] 16 octets .nlmsg_len = 16 .nlmsg_type = 26 <0x1a> .nlmsg_flags = 5 .nlmsg_seq = 1233019334 .nlmsg_pid = 5516 --------------------------- END NETLINK MESSAGE --------------------------- root at UbuntuRuter:/usr/src/wireless-testing# iw list Wiphy phy0 Band 1: HT capabilities: 0x104e * 20/40 MHz operation * SM PS disabled * 40 MHz short GI * max A-MSDU len 3839 * DSSS/CCK 40 MHz HT A-MPDU factor: 0x0003 (65535 bytes) HT A-MPDU density: 0x0006 (8 usec) HT MCS set: ff ff 00 00 00 00 00 00 00 00 00 00 01 00 00 00 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (disabled) * 2472 MHz [13] (disabled) * 2484 MHz [14] (disabled) Bitrates: * 1.0 Mbps * 2.0 Mbps * 5.5 Mbps * 11.0 Mbps * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Band 2: HT capabilities: 0x104e * 20/40 MHz operation * SM PS disabled * 40 MHz short GI * max A-MSDU len 3839 * DSSS/CCK 40 MHz HT A-MPDU factor: 0x0003 (65535 bytes) HT A-MPDU density: 0x0006 (8 usec) HT MCS set: ff ff 00 00 00 00 00 00 00 00 00 00 01 00 00 00 Frequencies: * 5180 MHz [36] (30.0 dBm) (passive scanning, no IBSS) * 5200 MHz [40] (30.0 dBm) (passive scanning, no IBSS) * 5220 MHz [44] (30.0 dBm) (passive scanning, no IBSS) * 5240 MHz [48] (30.0 dBm) (passive scanning, no IBSS) * 5260 MHz [52] (30.0 dBm) (passive scanning, no IBSS, radar detection) * 5280 MHz [56] (30.0 dBm) (passive scanning, no IBSS, radar detection) * 5300 MHz [60] (30.0 dBm) (passive scanning, no IBSS, radar detection) * 5320 MHz [64] (30.0 dBm) (passive scanning, no IBSS, radar detection) * 5500 MHz [100] (disabled) * 5520 MHz [104] (disabled) * 5540 MHz [108] (disabled) * 5560 MHz [112] (disabled) * 5580 MHz [116] (disabled) * 5600 MHz [120] (disabled) * 5620 MHz [124] (disabled) * 5640 MHz [128] (disabled) * 5660 MHz [132] (disabled) * 5680 MHz [136] (disabled) * 5700 MHz [140] (disabled) * 5745 MHz [149] (30.0 dBm) (passive scanning, no IBSS) * 5765 MHz [153] (30.0 dBm) (passive scanning, no IBSS) * 5785 MHz [157] (30.0 dBm) (passive scanning, no IBSS) * 5805 MHz [161] (30.0 dBm) (passive scanning, no IBSS) * 5825 MHz [165] (30.0 dBm) (passive scanning, no IBSS) Bitrates: * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Supported interface modes: * IBSS * Station * AP * AP(VLAN) * Monitor root at UbuntuRuter:/usr/src/wireless-testing#