From: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
To: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] pciehp: Handle interrupts that happen during initialization.
Date: Thu, 29 Jan 2009 16:34:14 +0900 [thread overview]
Message-ID: <49815BF6.7060402@jp.fujitsu.com> (raw)
In-Reply-To: <m1pri623g9.fsf@fess.ebiederm.org>
Hi,
I don't understand what this patch is trying to fix. Could you
please tell me more about the problem?
And I have a worry. With this patch, the hotplug operation files
under /sys/bus/pci/slots/*/ directory will be created before the
interrupt is initialized. If hotplug operation is initiated (power
on/off, change attention indicator and so on) by user before
interrupt is initialized (though I think it's rare), command
completion event could not be handled.
Thanks,
Kenji Kaneshige
Eric W. Biederman wrote:
> Move the enabling of interrupts after all of the data structures
> are setup so that we can safely run the interrupt handler as
> soon as it is registered.
>
> Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com>
> ---
> drivers/pci/hotplug/pciehp.h | 2 ++
> drivers/pci/hotplug/pciehp_core.c | 7 +++++++
> drivers/pci/hotplug/pciehp_hpc.c | 15 +++++++--------
> 3 files changed, 16 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
> index db85284..39ae375 100644
> --- a/drivers/pci/hotplug/pciehp.h
> +++ b/drivers/pci/hotplug/pciehp.h
> @@ -111,6 +111,7 @@ struct controller {
> int cmd_busy;
> unsigned int no_cmd_complete:1;
> unsigned int link_active_reporting:1;
> + unsigned int notification_enabled:1;
> };
>
> #define INT_BUTTON_IGNORE 0
> @@ -170,6 +171,7 @@ extern int pciehp_configure_device(struct slot *p_slot);
> extern int pciehp_unconfigure_device(struct slot *p_slot);
> extern void pciehp_queue_pushbutton_work(struct work_struct *work);
> struct controller *pcie_init(struct pcie_device *dev);
> +int pcie_init_notification(struct controller *ctrl);
> int pciehp_enable_slot(struct slot *p_slot);
> int pciehp_disable_slot(struct slot *p_slot);
> int pcie_enable_notification(struct controller *ctrl);
> diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
> index c248554..681e391 100644
> --- a/drivers/pci/hotplug/pciehp_core.c
> +++ b/drivers/pci/hotplug/pciehp_core.c
> @@ -434,6 +434,13 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_
> goto err_out_release_ctlr;
> }
>
> + /* Enable events after we have setup the data structures */
> + rc = pcie_init_notification(ctrl);
> + if (rc) {
> + ctrl_err(ctrl, "Notification initialization failed\n");
> + goto err_out_release_ctlr;
> + }
> +
> /* Check if slot is occupied */
> t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
> t_slot->hpc_ops->get_adapter_status(t_slot, &value);
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index 71a8012..7a16c68 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -934,7 +934,7 @@ static void pcie_disable_notification(struct controller *ctrl)
> ctrl_warn(ctrl, "Cannot disable software notification\n");
> }
>
> -static int pcie_init_notification(struct controller *ctrl)
> +int pcie_init_notification(struct controller *ctrl)
> {
> if (pciehp_request_irq(ctrl))
> return -1;
> @@ -942,13 +942,17 @@ static int pcie_init_notification(struct controller *ctrl)
> pciehp_free_irq(ctrl);
> return -1;
> }
> + ctrl->notification_enabled = 1;
> return 0;
> }
>
> static void pcie_shutdown_notification(struct controller *ctrl)
> {
> - pcie_disable_notification(ctrl);
> - pciehp_free_irq(ctrl);
> + if (ctrl->notification_enabled) {
> + pcie_disable_notification(ctrl);
> + pciehp_free_irq(ctrl);
> + ctrl->notification_enabled = 0;
> + }
> }
>
> static int pcie_init_slot(struct controller *ctrl)
> @@ -1110,13 +1114,8 @@ struct controller *pcie_init(struct pcie_device *dev)
> if (pcie_init_slot(ctrl))
> goto abort_ctrl;
>
> - if (pcie_init_notification(ctrl))
> - goto abort_slot;
> -
> return ctrl;
>
> -abort_slot:
> - pcie_cleanup_slot(ctrl);
> abort_ctrl:
> kfree(ctrl);
> abort:
next prev parent reply other threads:[~2009-01-29 7:34 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-29 3:31 [PATCH] pciehp: Handle interrupts that happen during initialization Eric W. Biederman
2009-01-29 7:34 ` Kenji Kaneshige [this message]
2009-02-13 19:29 ` Jesse Barnes
2009-02-14 4:06 ` Eric W. Biederman
2009-02-14 12:53 ` Eric W. Biederman
2009-02-14 14:56 ` Eric W. Biederman
2009-02-16 8:02 ` Kenji Kaneshige
2009-02-17 23:17 ` Eric W. Biederman
2009-02-18 5:48 ` Kenji Kaneshige
2009-02-23 11:08 ` Eric W. Biederman
2009-02-24 17:05 ` Jesse Barnes
2009-02-24 17:08 ` Jesse Barnes
2009-02-16 8:00 ` Kenji Kaneshige
2009-02-18 0:40 ` Eric W. Biederman
2009-02-18 7:12 ` Kenji Kaneshige
2009-02-18 8:47 ` Eric W. Biederman
2009-02-20 6:18 ` Kenji Kaneshige
2009-02-23 11:17 ` Eric W. Biederman
2009-02-24 17:38 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49815BF6.7060402@jp.fujitsu.com \
--to=kaneshige.kenji@jp.fujitsu.com \
--cc=ebiederm@xmission.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.