All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86: remove left over files
Date: Thu, 29 Jan 2009 19:29:24 -0800	[thread overview]
Message-ID: <49827414.2020908@kernel.org> (raw)


Impact: cleanup

remove deaf files

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/include/asm/bigsmp/apic.h    |  138 ----------------------------------
 arch/x86/include/asm/bigsmp/apicdef.h |    9 --
 arch/x86/include/asm/bigsmp/ipi.h     |   22 -----
 arch/x86/mach-default/Makefile        |    5 -
 4 files changed, 174 deletions(-)

Index: linux-2.6/arch/x86/include/asm/bigsmp/apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/bigsmp/apic.h
+++ /dev/null
@@ -1,138 +0,0 @@
-#ifndef __ASM_MACH_APIC_H
-#define __ASM_MACH_APIC_H
-
-#define xapic_phys_to_log_apicid(cpu) (per_cpu(x86_bios_cpu_apicid, cpu))
-
-static inline int bigsmp_apic_id_registered(void)
-{
-	return 1;
-}
-
-static inline const cpumask_t *bigsmp_target_cpus(void)
-{
-#ifdef CONFIG_SMP
-	return &cpu_online_map;
-#else
-	return &cpumask_of_cpu(0);
-#endif
-}
-
-#define APIC_DFR_VALUE		(APIC_DFR_FLAT)
-
-static inline unsigned long
-bigsmp_check_apicid_used(physid_mask_t bitmap, int apicid)
-{
-	return 0;
-}
-
-static inline unsigned long bigsmp_check_apicid_present(int bit)
-{
-	return 1;
-}
-
-static inline unsigned long calculate_ldr(int cpu)
-{
-	unsigned long val, id;
-	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
-	id = xapic_phys_to_log_apicid(cpu);
-	val |= SET_APIC_LOGICAL_ID(id);
-	return val;
-}
-
-/*
- * Set up the logical destination ID.
- *
- * Intel recommends to set DFR, LDR and TPR before enabling
- * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
- * document number 292116).  So here it goes...
- */
-static inline void bigsmp_init_apic_ldr(void)
-{
-	unsigned long val;
-	int cpu = smp_processor_id();
-
-	apic_write(APIC_DFR, APIC_DFR_VALUE);
-	val = calculate_ldr(cpu);
-	apic_write(APIC_LDR, val);
-}
-
-static inline void bigsmp_setup_apic_routing(void)
-{
-	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
-		"Physflat", nr_ioapics);
-}
-
-static inline int bigsmp_apicid_to_node(int logical_apicid)
-{
-	return apicid_2_node[hard_smp_processor_id()];
-}
-
-static inline int bigsmp_cpu_present_to_apicid(int mps_cpu)
-{
-	if (mps_cpu < nr_cpu_ids)
-		return (int) per_cpu(x86_bios_cpu_apicid, mps_cpu);
-
-	return BAD_APICID;
-}
-
-static inline physid_mask_t bigsmp_apicid_to_cpu_present(int phys_apicid)
-{
-	return physid_mask_of_physid(phys_apicid);
-}
-
-extern u8 cpu_2_logical_apicid[];
-/* Mapping from cpu number to logical apicid */
-static inline int bigsmp_cpu_to_logical_apicid(int cpu)
-{
-	if (cpu >= nr_cpu_ids)
-		return BAD_APICID;
-	return cpu_physical_id(cpu);
-}
-
-static inline physid_mask_t bigsmp_ioapic_phys_id_map(physid_mask_t phys_map)
-{
-	/* For clustered we don't have a good way to do this yet - hack */
-	return physids_promote(0xFFL);
-}
-
-static inline void bigsmp_setup_portio_remap(void)
-{
-}
-
-static inline int bigsmp_check_phys_apicid_present(int boot_cpu_physical_apicid)
-{
-	return 1;
-}
-
-/* As we are using single CPU as destination, pick only one CPU here */
-static inline unsigned int bigsmp_cpu_mask_to_apicid(const cpumask_t *cpumask)
-{
-	return bigsmp_cpu_to_logical_apicid(first_cpu(*cpumask));
-}
-
-static inline unsigned int
-bigsmp_cpu_mask_to_apicid_and(const struct cpumask *cpumask,
-			      const struct cpumask *andmask)
-{
-	int cpu;
-
-	/*
-	 * We're using fixed IRQ delivery, can only return one phys APIC ID.
-	 * May as well be the first.
-	 */
-	for_each_cpu_and(cpu, cpumask, andmask) {
-		if (cpumask_test_cpu(cpu, cpu_online_mask))
-			break;
-	}
-	if (cpu < nr_cpu_ids)
-		return bigsmp_cpu_to_logical_apicid(cpu);
-
-	return BAD_APICID;
-}
-
-static inline int bigsmp_phys_pkg_id(int cpuid_apic, int index_msb)
-{
-	return cpuid_apic >> index_msb;
-}
-
-#endif /* __ASM_MACH_APIC_H */
Index: linux-2.6/arch/x86/include/asm/bigsmp/apicdef.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/bigsmp/apicdef.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef __ASM_MACH_APICDEF_H
-#define __ASM_MACH_APICDEF_H
-
-static inline unsigned bigsmp_get_apic_id(unsigned long x)
-{
-	return (x >> 24) & 0xFF;
-}
-
-#endif
Index: linux-2.6/arch/x86/include/asm/bigsmp/ipi.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/bigsmp/ipi.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef __ASM_MACH_IPI_H
-#define __ASM_MACH_IPI_H
-
-void default_send_IPI_mask_sequence(const struct cpumask *mask, int vector);
-void default_send_IPI_mask_allbutself(const struct cpumask *mask, int vector);
-
-static inline void default_send_IPI_mask(const struct cpumask *mask, int vector)
-{
-	default_send_IPI_mask_sequence(mask, vector);
-}
-
-static inline void bigsmp_send_IPI_allbutself(int vector)
-{
-	default_send_IPI_mask_allbutself(cpu_online_mask, vector);
-}
-
-static inline void bigsmp_send_IPI_all(int vector)
-{
-	default_send_IPI_mask(cpu_online_mask, vector);
-}
-
-#endif /* __ASM_MACH_IPI_H */
Index: linux-2.6/arch/x86/mach-default/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/mach-default/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-y				:= setup.o

             reply	other threads:[~2009-01-30  3:30 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-30  3:29 Yinghai Lu [this message]
2009-01-30  3:30 ` [PATCH] x86: fix compiling with 64bit with def_to_bigsmp Yinghai Lu
2009-01-30 14:22   ` Ingo Molnar
2009-01-30  3:31 ` [PATCH] x86: seperate default_send_IPI_mask_sequence/allbutself with logical Yinghai Lu
2009-01-30 14:22   ` Ingo Molnar
2009-01-30 14:21 ` [PATCH] x86: remove left over files Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49827414.2020908@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=hpa@zytor.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.