From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx1.redhat.com (mx1.redhat.com [172.16.48.31]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id n0UFtRLL027439 for ; Fri, 30 Jan 2009 10:55:27 -0500 Received: from mail.work.de (mail.work.de [212.12.32.20]) by mx1.redhat.com (8.13.8/8.13.8) with ESMTP id n0UFt9dX010192 for ; Fri, 30 Jan 2009 10:55:09 -0500 Message-ID: <498322D8.5040702@gmail.com> Date: Fri, 30 Jan 2009 19:55:04 +0400 From: Manu Abraham MIME-Version: 1.0 To: =?ISO-8859-15?Q?Marius_R=E4sener?= References: <4982FB36.7080008@softronic-mannheim.de> In-Reply-To: <4982FB36.7080008@softronic-mannheim.de> Content-Type: text/plain; charset=ISO-8859-15 Content-Transfer-Encoding: 8bit Cc: video4linux-list@redhat.com Subject: Re: Terratec Cinergy C PCI - Mantis Driver List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Marius Räsener wrote: > Hi V4L-List, > > i hope i can find a solution with your help here. > The situation: > Hp ProLiant DL380 G2 Server should become a LinuxMCE Core (got that cheap). > LinuxMCE is based on Kubuntu 7.10 (i386 in my case) > I think the components of the System arent relevant, but correct my > please if not. > Maybe that there are only PCI-X slots available, but all Cards I use are > 3.3V compatible (with the 2 notch). > > DVB-C Card is "Terratec Cingery C PCI HD". > > I installed the card via this method: > > cd /usr/src > sudo apt-get install mercurial > sudo hg clone http://jusst.de/hg/mantis cd mantis > sudo make > sudo make install > sudo reboot > > > this worked for me several times. > ( > i got the expected dmesg output: > [ 101.667604] found a VP-2040 PCI DVB-C device on (0a:01.0), > [ 101.670427] DVB: registering new adapter (Mantis dvb adapter) > [ 102.189326] mantis_frontend_init (0): Probing for CU1216 (DVB-C) > [ 102.192819] mantis_frontend_init (0): found Philips CU1216 DVB-C > frontend (TDA10023) @ 0x0c > [ 102.192823] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 > frontend attach success > [ 102.192829] DVB: registering adapter 0 frontend 0 (Philips TDA10023 > DVB-C)... > ) > but after the last complete new-installation its not anymore. > ( > now die dmesg output: > ~: dmesg | grep -i dvb > ~: > ) > i'm not sure what to try next. the card itself installs in Vista x64 > without any errors so its no hardware defect i guess. > i also tried to install a older version of the mantis driver, but i'm > not sure if i downloaded them correctly. > i'm also not sure if i can reinstall older or newer versions of the > driver without messing something up. does that work? > i also tried several different pci-x slots caused that procedure > sometimes helped me in windows environment... > > any hints please for me before i jump from a bridge or something :) Please load the mantis_core.ko module before you load the mantis.ko module. Regards, Manu -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list