From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx1.redhat.com (mx1.redhat.com [172.16.48.31]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id n0VDVXUj026100 for ; Sat, 31 Jan 2009 08:31:33 -0500 Received: from dd6904.kasserver.com (dd6904.kasserver.com [85.13.131.139]) by mx1.redhat.com (8.13.8/8.13.8) with ESMTP id n0VDVEs7025596 for ; Sat, 31 Jan 2009 08:31:15 -0500 Message-ID: <498452A1.4080701@softronic-mannheim.de> Date: Sat, 31 Jan 2009 14:31:13 +0100 From: =?ISO-8859-15?Q?Marius_R=E4sener?= MIME-Version: 1.0 To: Manu Abraham References: <4982FB36.7080008@softronic-mannheim.de> <498322D8.5040702@gmail.com> In-Reply-To: <498322D8.5040702@gmail.com> Content-Type: text/plain; charset=ISO-8859-15; format=flowed Content-Transfer-Encoding: 8bit Cc: video4linux-list@redhat.com Subject: Re: Terratec Cinergy C PCI - Mantis Driver List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: Hi again, i tried older version now from the driver without success. i tried sudo rmmod mantis.ko ... or with mantis_core.ko "Module mantis does not exist in /proc/modules" on both modules i really have no idea what to do ... i also looked at the driver sources ... but thats far to advance for me right now ... i mean there a really much lines of code :) greetings marius Am 30.01.2009 16:55, schrieb Manu Abraham: > Marius Räsener wrote: > >> Hi V4L-List, >> >> i hope i can find a solution with your help here. >> The situation: >> Hp ProLiant DL380 G2 Server should become a LinuxMCE Core (got that cheap). >> LinuxMCE is based on Kubuntu 7.10 (i386 in my case) >> I think the components of the System arent relevant, but correct my >> please if not. >> Maybe that there are only PCI-X slots available, but all Cards I use are >> 3.3V compatible (with the 2 notch). >> >> DVB-C Card is "Terratec Cingery C PCI HD". >> >> I installed the card via this method: >> >> cd /usr/src >> sudo apt-get install mercurial >> sudo hg clone http://jusst.de/hg/mantis cd mantis >> sudo make >> sudo make install >> sudo reboot >> >> >> this worked for me several times. >> ( >> i got the expected dmesg output: >> [ 101.667604] found a VP-2040 PCI DVB-C device on (0a:01.0), >> [ 101.670427] DVB: registering new adapter (Mantis dvb adapter) >> [ 102.189326] mantis_frontend_init (0): Probing for CU1216 (DVB-C) >> [ 102.192819] mantis_frontend_init (0): found Philips CU1216 DVB-C >> frontend (TDA10023) @ 0x0c >> [ 102.192823] mantis_frontend_init (0): Mantis DVB-C Philips CU1216 >> frontend attach success >> [ 102.192829] DVB: registering adapter 0 frontend 0 (Philips TDA10023 >> DVB-C)... >> ) >> but after the last complete new-installation its not anymore. >> ( >> now die dmesg output: >> ~: dmesg | grep -i dvb >> ~: >> ) >> i'm not sure what to try next. the card itself installs in Vista x64 >> without any errors so its no hardware defect i guess. >> i also tried to install a older version of the mantis driver, but i'm >> not sure if i downloaded them correctly. >> i'm also not sure if i can reinstall older or newer versions of the >> driver without messing something up. does that work? >> i also tried several different pci-x slots caused that procedure >> sometimes helped me in windows environment... >> >> any hints please for me before i jump from a bridge or something :) >> > > Please load the mantis_core.ko module before you load the mantis.ko > module. > > Regards, > Manu > -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list