All of lore.kernel.org
 help / color / mirror / Atom feed
From: Antti Palosaari <crope@iki.fi>
To: linux-media@vger.kernel.org
Cc: linux-dvb@linuxtv.org, Andrew Williams <andrew.williams@joratech.com>
Subject: Re: [linux-dvb] KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) / AF9015 -	Dual tuner enabled by default =Bad signal reception
Date: Mon, 02 Feb 2009 22:24:42 +0200	[thread overview]
Message-ID: <4987568A.6060504@iki.fi> (raw)
In-Reply-To: <546B4176F0487A4CBA62FC16EFC1D9D6026FC2@EXCHANGE.joratech.com>

Hello Andrew,
Andrew Williams wrote:
> In the past I have had problems with reception for the AF9015 if both
> tuners were enabled.
> It was disabled by default or I could manually enable dual tuners with
> dvb-usb-af9015 dual_mode=1 (modprobe.d/options)
> 
> If both tuners were enabled there was a lot of signal degradation,
> however, with only 1 tuner enabled the quality was VERY good.

Yes, it really looks like there is some sensitivity drop when both 
tuners are enabled. However in my understanding tuner #1 in dual mode 
have almost same performance than tuner #0 in single mode. Also current 
MXL5005S tuner driver has not best performance...

Could you test if that tuner driver performs any better for you:
http://linuxtv.org/hg/~anttip/af9015-mxl500x/

> I have just downloaded the latest drivers and it seems that both tuners
> are enabled by default and there is no parameter that I can find to
> disable the second tuner.
> Now I am back to where I was before with bad signal degradation but no
> way to disable the second tuner.

Yes, I removed whole parameter. If there will be much negative feedback 
then I should consider add that parameter back - but probably dual mode 
enabled by default.

> With drivers dated 22 Dec 2008 the second tuner was still disabled by
> default. Also the driver from 22 December 2008 lit an LED on the Tuner
> to indicate that the firmware was loaded/stick was initialised.
> Something that I did not have before (the LED).
> 
> Now with the latest driver, the LED does not function anymore but more
> importantly, both tuners are enabled by default.

hmm, haven't changed LED controls. I should look that later.

> Is there any way that I can disable the second tuner without having to
> revert to the old drivers?

Not currently. I will wait some feedback and make decision about that.

Thank you for feedback.

regards
Antti
-- 
http://palosaari.fi/

  reply	other threads:[~2009-02-02 20:24 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-29 12:45 [linux-dvb] KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) / AF9015 - Dual tuner enabled by default =Bad signal reception Andrew Williams
2009-02-02 20:24 ` Antti Palosaari [this message]
2009-02-02 20:37   ` Lindsay Mathieson
2009-02-03  8:00   ` Andrew Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4987568A.6060504@iki.fi \
    --to=crope@iki.fi \
    --cc=andrew.williams@joratech.com \
    --cc=linux-dvb@linuxtv.org \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.