Re: [Xenomai-help] Re : Problem with rtdm_irq_request

[Philippe Gerum <rpm@xenomai.org>]

seb p wrote:
> I try with the last version of xenomai but it's the same problem.
> 
> I send you my code.
>

http://www.xenomai.org/documentation/branches/v2.4.x/html/api/group__rtdmirq.html

> Thank you for your help.
> 
> Seb.
> 
> ------------------------------------------------------------------------
> *De :* Philippe Gerum <rpm@xenomai.org>
> *À :* seb p <sebas_p2002@domain.hid>
> *Cc :* xenomai@xenomai.org
> *Envoyé le :* Lundi, 2 Février 2009, 9h52mn 27s
> *Objet :* Re: [Xenomai-help] Problem with rtdm_irq_request
> 
> seb p wrote:
>> Hello,
>>
>> I use a atmel card AT91SAM9260 and I install Linux 2.6.25 with xenomai
>> 2.4.4. I am doing a RTDM serial driver. I use the function
>> rtdm_irq_request
>>
> <http://www.xenomai.org/documentation/trunk/html/api/group__rtdmirq.html#g9bb3d95218ac5261e4033fb0bf695073>
>> with the routine rt_rs485_interrupt. The interrupt number is 7. The
>> interrupt is enable when a carracter is in the buffer Rx and the
>> programm execute the routine rt_rs485_interrupt. But in my programm,
>> when a caracter is in the buffer Rx, the programm doesn't execute the
>> routine and I must reboot the linux. The console don't answer.
>>
>> Have you got an idea of the problem? Thanks.
>>
> 
> Time is a scarce resource for everyone. With that in mind, please:
> 
> - do not report issues based on outdated Xenomai releases unless you
> made sure
> that such issue also happens on the latest release. Xenomai 2.4.6.1 will
> happily
> work over 2.6.25/arm.
> 
> - send an excerpt of your code that helps understanding the issue.
> 
>> Séb.
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Xenomai-help mailing list
>> Xenomai-help@domain.hid <mailto:Xenomai-help@domain.hid>
>> https://mail.gna.org/listinfo/xenomai-help
> 
> 
> -- 
> Philippe.
> 


-- 
Philippe.