From: Keith Romberg <romberg@ucar.edu>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] Help With a H8QMI-3 Motherboard
Date: Thu, 05 Feb 2009 15:58:15 +0000 [thread overview]
Message-ID: <498B0C97.6010900@ucar.edu> (raw)
Hello,
I have having a little bit of trouble with lm_sensors on a Supermicro
H8QMI-3 motherboard. It is a 4 socket board with 4 Opteron 8354 CPUs.
Basically lm_sensors is reporting 2 CPU temp readings rather than 16
core temps. Here is all the info about the system I could think of to
grab. In sensors-detect I did notice the message:
"no driver for AMD K10 thermal sensors yet"
Is the AMD K10 sensor for the 8354 CPUs?
Any help you be great.
Keith
---------------------------------------------------------------------
# uname -a
Linux smaug 2.6.26.8-57.fc8 #1 SMP Thu Dec 18 18:59:49 EST 2008 x86_64
x86_64 x86_64 GNU/Linux
# sensors -v
sensors version 2.10.6 with libsensors version 2.10.6
# lshw -short
===========================
system H8QM3
/0 bus H8QM3
/0/1 memory 64KiB BIOS
/0/3 processor Quad-Core AMD Opteron(tm)
Processor 8
/0/3/5 memory 512KiB L1 cache
/0/3/6 memory 2MiB L2 cache
/0/3/7 memory 2MiB L3 cache
/0/8 processor Quad-Core AMD Opteron(tm)
Processor 8
/0/8/9 memory 512KiB L1 cache
/0/8/a memory 2MiB L2 cache
/0/8/b memory 2MiB L3 cache
/0/c processor Quad-Core AMD Opteron(tm)
Processor 8
/0/c/d memory 512KiB L1 cache
/0/c/e memory 2MiB L2 cache
/0/c/f memory 2MiB L3 cache
/0/10 processor Quad-Core AMD Opteron(tm)
Processor 8
/0/10/11 memory 512KiB L1 cache
/0/10/12 memory 2MiB L2 cache
/0/10/13 memory 2MiB L3 cache
/0/27 memory 10GiB System Memory
/0/27/0 memory DIMM [empty]
/0/27/1 memory DIMM [empty]
/0/27/2 memory DIMM [empty]
/0/27/3 memory DIMM [empty]
/0/27/4 memory 512MiB DIMM Synchronous 333
MHz (3.0
/0/27/5 memory 512MiB DIMM Synchronous 333
MHz (3.0
/0/27/6 memory 1GiB DIMM Synchronous 333 MHz
(3.0 ns
/0/27/7 memory 1GiB DIMM Synchronous 333 MHz
(3.0 ns
/0/27/8 memory DIMM [empty]
/0/27/9 memory DIMM [empty]
/0/27/a memory DIMM [empty]
/0/27/b memory DIMM [empty]
/0/27/c memory 512MiB DIMM Synchronous 333
MHz (3.0
/0/27/d memory 512MiB DIMM Synchronous 333
MHz (3.0
/0/27/e memory 1GiB DIMM Synchronous 333 MHz
(3.0 ns
/0/27/f memory 1GiB DIMM Synchronous 333 MHz
(3.0 ns
/0/27/10 memory DIMM [empty]
/0/27/11 memory DIMM [empty]
/0/27/12 memory DIMM [empty]
/0/27/13 memory DIMM [empty]
/0/27/14 memory DIMM [empty]
/0/27/15 memory DIMM [empty]
/0/27/16 memory 1GiB DIMM Synchronous 333 MHz
(3.0 ns
/0/27/17 memory 1GiB DIMM Synchronous 333 MHz
(3.0 ns
/0/27/18 memory DIMM [empty]
/0/27/19 memory DIMM [empty]
/0/27/1a memory DIMM [empty]
/0/27/1b memory DIMM [empty]
/0/27/1c memory DIMM [empty]
/0/27/1d memory DIMM [empty]
/0/27/1e memory 1GiB DIMM Synchronous 333 MHz
(3.0 ns
/0/27/1f memory 1GiB DIMM Synchronous 333 MHz
(3.0 ns
/0/4 memory RAM memory
/0/100 bridge MCP55 LPC Bridge
/0/7 bus MCP55 SMBus
/0/2 bus MCP55 USB Controller
/0/2/1 usb2 bus OHCI Host Controller
/0/2.1 bus MCP55 USB Controller
/0/2.1/1 usb1 bus EHCI Host Controller
/0/9 scsi7 storage MCP55 IDE
/0/9/0.0.0 /dev/cdrom disk DVD RW AW-Q170A
/0/9/0.0.0/0 /dev/cdrom disk
/0/9/0.1.0 /dev/sdc disk 300GB Maxtor 6B300R0
/0/9/0.1.0/1 /dev/sdc1 volume 196MiB EXT3 volume
/0/9/0.1.0/2 /dev/sdc2 volume 279GiB EXT3 volume
/0/5 storage MCP55 SATA Controller
/0/5.1 storage MCP55 SATA Controller
/0/5.2 storage MCP55 SATA Controller
/0/6 bridge MCP55 PCI bridge
/0/6/1 display ES1000
/0/101 bridge MCP55 PCI Express bridge
/0/102 bridge MCP55 PCI Express bridge
/0/102/0 bridge uPD720400 PCI Express -
PCI/PCI-X Bri
/0/102/0/3 eth0 network 82546GB Gigabit Ethernet
Controller
/0/102/0/3.1 eth1 network 82546GB Gigabit Ethernet
Controller
/0/102/0.1 bridge uPD720400 PCI Express -
PCI/PCI-X Bri
/0/103 bridge MCP55 PCI Express bridge
/0/104 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/105 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/106 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/107 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/108 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/109 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/10a bridge Family 10h [Opteron,
Athlon64, Sempro
/0/10b bridge Family 10h [Opteron,
Athlon64, Sempro
/0/10c bridge Family 10h [Opteron,
Athlon64, Sempro
/0/10d bridge Family 10h [Opteron,
Athlon64, Sempro
/0/10e bridge Family 10h [Opteron,
Athlon64, Sempro
/0/10f bridge Family 10h [Opteron,
Athlon64, Sempro
/0/110 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/111 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/112 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/113 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/114 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/115 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/116 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/117 bridge Family 10h [Opteron,
Athlon64, Sempro
/0/0 memory RAM memory
/0/a memory RAM memory
/0/b bus MCP55 SMBus
/0/118 bridge MCP55 PCI Express bridge
/0/118/0 bridge 80332 [Dobson] I/O processor
(A-Segme
/0/118/0/e scsi0 storage MegaRAID
/0/118/0/e/0.f.0 processor 12 BAY U2W CU
/0/118/0/e/1.f.0 processor 12 BAY U2W CU
/0/118/0/e/2.0.0 /dev/sda disk 512GB LD 0 RAID5 489G
/0/118/0/e/2.0.0/1 /dev/sda1 volume 477GiB Linux LVM Physical
Volume part
/0/118/0/e/2.1.0 /dev/sdb disk 254GB LD 1 RAID5 242G
/0/118/0/e/2.1.0/1 /dev/sdb1 volume 237GiB Linux LVM Physical
Volume part
/0/118/0.2 bridge 80332 [Dobson] I/O processor
(B-Segme
/0/119 bridge MCP55 PCI Express bridge
/0/119/0 eth2 network RTL8101E PCI Express Fast
Ethernet co
/0/11a bridge MCP55 PCI Express bridge
/1 bond0 network Ethernet interface
# lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a3)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Link Control
00:19.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] HyperTransport Configuration
00:19.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Address Map
00:19.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] DRAM Controller
00:19.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Miscellaneous Control
00:19.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Link Control
00:1a.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] HyperTransport Configuration
00:1a.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Address Map
00:1a.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] DRAM Controller
00:1a.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Miscellaneous Control
00:1a.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Link Control
00:1b.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] HyperTransport Configuration
00:1b.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Address Map
00:1b.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] DRAM Controller
00:1b.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Miscellaneous Control
00:1b.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron,
Athlon64, Sempron] Link Control
01:01.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
03:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X
Bridge (rev 07)
03:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X
Bridge (rev 07)
04:03.0 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet
Controller (rev 03)
04:03.1 Ethernet controller: Intel Corporation 82546GB Gigabit Ethernet
Controller (rev 03)
80:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
80:01.0 RAM memory: nVidia Corporation MCP55 LPC Bridge (rev a3)
80:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a3)
80:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
80:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
80:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a3)
81:00.0 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor
(A-Segment Bridge) (rev 07)
81:00.2 PCI bridge: Intel Corporation 80332 [Dobson] I/O processor
(B-Segment Bridge) (rev 07)
82:0e.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 07)
84:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E
PCI Express Fast Ethernet controller (rev 01)
# sensors-detect revision 5132 (2008-02-26 14:52:35 +0100)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-nforce2' for device 0000:00:01.1: nVidia Corporation
nForce4 SMBus (MCP55)
We will now try to load each adapter module in turn.
Load `i2c-nforce2' (say NO if built into your kernel)? (YES/no):
Module loaded successfully.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
them scanned by manually loading the modules before running this script.
To continue, we need module `i2c-dev' to be loaded.
Do you want to load `i2c-dev' now? (YES/no):
Module loaded successfully.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: SMBus nForce2 adapter at d800 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Next adapter: SMBus nForce2 adapter at d480 (i2c-1)
Do you want to scan it? (YES/no/selectively):
Next adapter: SMBus nForce2 adapter at 2d00 (i2c-2)
Do you want to scan it? (YES/no/selectively):
Next adapter: SMBus nForce2 adapter at 2e00 (i2c-3)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x1f
Probing for `Maxim MAX6650/MAX6651'... No
Client found at address 0x2f
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM78-J'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `Analog Devices ADT7470'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... Success!
(confidence 8, driver `w83793', other addresses: 0x4b 0x4f)
Probing for `Winbond W83791SD'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Winbond W83L786NR/NG/R/G'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1029'... No
Probing for `ITE IT8712F'... No
Probing for `Fintek custom power control IC'... No
Probing for `Winbond W83791D'... No
Client found at address 0x4b
Probing for `National Semiconductor LM75'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Dallas Semiconductor DS1621'... No
Probing for `Maxim MAX6650/MAX6651'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Client found at address 0x4f
Probing for `National Semiconductor LM75'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `Dallas Semiconductor DS1621'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Probing for `IPMI BMC KCS' at 0xca0... No
Probing for `IPMI BMC SMIC' at 0xca8... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... Yes
Found `Winbond W83627HF/F/HG/G Super IO Sensors' Success!
(address 0x290, driver `w83627hf')
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no):
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD K10 thermal sensors... Success!
(driver `to-be-written')
Intel Core family thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `w83793' (should be inserted):
Detects correctly:
* Bus `SMBus nForce2 adapter at 2e00'
Busdriver `i2c-nforce2', I2C address 0x2f (and 0x4b 0x4f)
Chip `Winbond W83793R/G' (confidence: 8)
Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus, address 0x290
Chip `Winbond W83627HF/F/HG/G Super IO Sensors' (confidence: 9)
Driver `to-be-written' (should be inserted):
Detects correctly:
* Chip `AMD K10 thermal sensors' (confidence: 9)
Do you want to overwrite /etc/sysconfig/lm_sensors? (YES/no): n
To load everything that is needed, add this to one of the system
initialization scripts (e.g. /etc/rc.d/rc.local):
#----cut here----
# I2C adapter drivers
modprobe i2c-nforce2
# Chip drivers
modprobe w83793
modprobe w83627hf
# no driver for AMD K10 thermal sensors yet
/usr/bin/sensors -s
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones! You really
should try these commands right now to make sure everything is
working properly. Monitoring programs won't work until the needed
modules are loaded.
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next reply other threads:[~2009-02-05 15:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-05 15:58 Keith Romberg [this message]
2009-02-10 14:27 ` [lm-sensors] Help With a H8QMI-3 Motherboard Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=498B0C97.6010900@ucar.edu \
--to=romberg@ucar.edu \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.