Re: Multipath setup and rdac questions

["Bryn M. Reeves" <bmr@redhat.com>]

Christian Røsnes wrote:
>>
>>               vendor                  "DGC"
>>               product                 "*"
>>
>> I suspect from the output below that you want:
>>
>>               vendor                  "DELL"
>>               product                 "DELL,MD Virtual Disk"
>>
>>
> Here's what I see for the MD3000i:
> 
> # cat /sys/block/sdb/device/vendor
> DELL
> # cat /sys/block/sdb/device/model
> MD Virtual Disk
> 
> Thank you
> Christian
> 

That's what I thought based on the output you posted earlier. You need 
to put this in multipath.conf instead of the values you currently have 
("DELL"/"MD3000i" which are not correct for this hardware) but you 
also need to resolve the issue of whether you want to use 
device-mapper or MPP multipathing - the /etc/multipath.conf file is 
only used by the device-mapper multipath tools.

Regards,
Bryn.