From: Simon Kenyon <simon@koala.ie>
To: linux-media@vger.kernel.org
Subject: failure of Cinergy Hybrid T USB XS on amd64
Date: Wed, 11 Feb 2009 09:42:05 +0000 [thread overview]
Message-ID: <49929D6D.1000507@koala.ie> (raw)
does anyone know what is going on here?
i know the device works because i can use it on my eee 900 running gentoo
however i get a failure to load the driver (hg pull as of yesterday) on
two different linux boxes. they are both running gentoo on an amd64
uname -a gives:
Linux newyork 2.6.27-gentoo-r8 #1 SMP PREEMPT Wed Feb 11 00:10:13 GMT
2009 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD
GNU/Linux
and this is the output from the driver load:
usb 2-1: new high speed USB device using ehci_hcd and address 4
usb 2-1: configuration #1 chosen from 1 choice
em28xx: New device TerraTec Electronic GmbH Cinergy Hybrid T USB XS @
480 Mbps (0ccd:0042, interface 0, class 0)
em28xx #0: Identified as Terratec Hybrid XS (card=11)
em28xx #0: chip ID is em2882/em2883
tvp5150' 2-005c: chip found @ 0xb8 (em28xx #0)
tuner' 2-0061: chip found @ 0xc2 (em28xx #0)
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x41d0bf96
em28xx #0: EEPROM info:
em28xx #0: AC97 audio (5 sample rates)
em28xx #0: 500mA max power
em28xx #0: Table at 0x06, strings=0x326a, 0x349c, 0x0000
xc2028 2-0061: creating new instance
xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner
firmware: requesting xc3028-v27.fw
xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, type:
xc2028 firmware, ver 2.7
xc2028 2-0061: Loading firmware for type=BASE (1), id 0000000000000000.
xc2028 2-0061: Loading firmware for type=(0), id 000000000000b700.
SCODE (20000000), id 000000000000b700:
xc2028 2-0061: Loading SCODE for type=MONO SCODE HAS_IF_4320 (60008000),
id 0000000000008000.
em28xx #0: Config register raw data: 0x50
em28xx #0: AC97 vendor ID = 0x83847652
em28xx #0: AC97 features = 0x6a90
em28xx #0: Sigmatel audio processor detected(stac 9752)
tvp5150' 2-005c: tvp5150am1 detected.
em28xx #0: v4l2 driver version 0.1.1
em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi1
zl10353_read_register: readreg error (reg=127, ret==-19)
em28xx #0/2: dvb frontend not attached. Can't attach xc3028
next reply other threads:[~2009-02-11 9:53 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-11 9:42 Simon Kenyon [this message]
2009-02-11 12:53 ` failure of Cinergy Hybrid T USB XS on amd64 Alain Perrot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49929D6D.1000507@koala.ie \
--to=simon@koala.ie \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.