* Technotrend TT-connect S-2400 - worked in only one kernel release (2.6.26)
@ 2009-02-16 19:37 David
0 siblings, 0 replies; only message in thread
From: David @ 2009-02-16 19:37 UTC (permalink / raw)
To: Linux Media Mailing List
There is a bug report in bugzilla about this one, but I'm wondering if
anyone else is seeing problems with this (USB) device. I see the
following timeout in kernel versions beyond 2.6.26
[ 3086.636035] usb 3-10: new high speed USB device using ehci_hcd and
address 7
[ 3086.769507] usb 3-10: configuration #1 chosen from 1 choice
[ 3087.066065] dvb-usb: found a 'Technotrend TT-connect S-2400' in cold
state, will try to load a firmware
[ 3087.066073] usb 3-10: firmware: requesting dvb-usb-tt-s2400-01.fw
[ 3087.102717] dvb-usb: downloading firmware from file
'dvb-usb-tt-s2400-01.fw'
[ 3087.165343] usbcore: registered new interface driver dvb_usb_ttusb2
[ 3087.166071] usb 3-10: USB disconnect, address 7
[ 3087.169039] dvb-usb: generic DVB-USB module successfully
deinitialized and disconnected.
[ 3088.928027] usb 3-10: new high speed USB device using ehci_hcd and
address 8
[ 3089.061927] usb 3-10: configuration #1 chosen from 1 choice
[ 3089.062504] dvb-usb: found a 'Technotrend TT-connect S-2400' in warm
state.
[ 3089.063148] dvb-usb: will pass the complete MPEG2 transport stream to
the software demuxer.
[ 3089.063404] DVB: registering new adapter (Technotrend TT-connect S-2400)
[ 3089.074375] DVB: registering adapter 0 frontend 0 (Philips TDA10086
DVB-S)...
[ 3091.076106] dvb-usb: recv bulk message failed: -110
[ 3091.076113] ttusb2: there might have been an error during control
message transfer. (rlen = 0, was 0)
[ 3091.076349] dvb-usb: Technotrend TT-connect S-2400 successfully
initialized and connected.
the 2.6.26 trace looks normal.
usb 1-3: new high speed USB device using ehci_hcd and address 14
usb 1-3: configuration #1 chosen from 1 choice
dvb-usb: found a 'Technotrend TT-connect S-2400' in cold state, will try
to load a firmware
firmware: requesting dvb-usb-tt-s2400-01.fw
dvb-usb: downloading firmware from file 'dvb-usb-tt-s2400-01.fw'
usb 1-3: USB disconnect, address 14
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
usb 1-3: new high speed USB device using ehci_hcd and address 15
usb 1-3: configuration #1 chosen from 1 choice
dvb-usb: found a 'Technotrend TT-connect S-2400' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (Technotrend TT-connect S-2400)
DVB: registering frontend 3 (Philips TDA10086 DVB-S)...
dvb-usb: Technotrend TT-connect S-2400 successfully initialized and
connected.
Cheers
David
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-02-16 20:03 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-16 19:37 Technotrend TT-connect S-2400 - worked in only one kernel release (2.6.26) David
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.