Linux version 2.6.27-gentoo-r8-xenomai (root@domain.hid) (gcc version 4.1.2 (Gentoo 4.1.2 p1.1)) #8 PREEMPT Tue Feb 17 19:38:11 CET 2009 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fee0000 (usable) BIOS-e820: 000000001fee0000 - 000000001fef5000 (ACPI data) BIOS-e820: 000000001fef5000 - 000000001ff00000 (ACPI NVS) BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x1fee0 max_arch_pfn = 0x100000 kernel direct mapping tables up to 1fee0000 @ 7000-d000 ACPI: RSDP 000F6BF0, 0024 (r2 IBM ) ACPI: XSDT 1FEE6FF2, 005C (r1 IBM TP-76 1220 LTP 0) ACPI: FACP 1FEE7100, 00F4 (r3 IBM TP-76 1220 IBM 1) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20080609] ACPI: DSDT 1FEE72E7, DB08 (r1 IBM TP-76 1220 MSFT 100000E) ACPI: FACS 1FEF6000, 0040 ACPI: SSDT 1FEE72B4, 0033 (r1 IBM TP-76 1220 MSFT 100000E) ACPI: ECDT 1FEF4DEF, 0052 (r1 IBM TP-76 1220 IBM 1) ACPI: TCPA 1FEF4E41, 0032 (r1 IBM TP-76 1220 PTL 1) ACPI: APIC 1FEF4E73, 005A (r1 IBM TP-76 1220 IBM 1) ACPI: MCFG 1FEF4ECD, 003E (r1 IBM TP-76 1220 IBM 1) ACPI: BOOT 1FEF4FD8, 0028 (r1 IBM TP-76 1220 LTP 1) 510MB LOWMEM available. mapped low ram: 0 - 1fee0000 low ram: 00000000 - 1fee0000 bootmap 00001000 - 00004fdc (6 early reservations) ==> bootmem [0000000000 - 001fee0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000100000 - 0000753628] TEXT DATA BSS ==> [0000100000 - 0000753628] #2 [0000754000 - 0000757000] INIT_PG_TABLE ==> [0000754000 - 0000757000] #3 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] #4 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #5 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001fee0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0001fee0 On node 0 totalpages: 130687 free_area_init_node: node 0, pgdat c069f060, node_mem_map c1000000 DMA zone: 3967 pages, LIFO batch:0 Normal zone: 125698 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000) Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129665 Kernel command line: root=/dev/sda3 vga=792 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Extended CMOS year: 2000 TSC: PIT calibration confirmed by PMTIMER. TSC: using PIT calibration value Detected 1861.979 MHz processor. I-pipe 2.1-02: pipeline enabled. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 511492k/523136k available (4328k kernel code, 11016k reserved, 1461k data, 260k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfffb9000 - 0xfffff000 ( 280 kB) vmalloc : 0xe0800000 - 0xfffb7000 ( 503 MB) lowmem : 0xc0000000 - 0xdfee0000 ( 510 MB) .init : 0xc06aa000 - 0xc06eb000 ( 260 kB) .data : 0xc053a3de - 0xc06a7a90 (1461 kB) .text : 0xc0100000 - 0xc053a3de (4328 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.95 BogoMIPS (lpj=7447916) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 Checking 'hlt' instruction... OK. Freeing SMP alternatives: 0k freed ACPI: Core revision 20080609 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 net_namespace: 588 bytes NET: Registered protocol family 16 ACPI: ACPI Dock Station Driver ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access ACPI: EC: EC description table is found, configuring boot EC ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled PCI: 0000:00:1d.0 reg 20 io port: [1800, 181f] PCI: 0000:00:1d.1 reg 20 io port: [1820, 183f] PCI: 0000:00:1d.2 reg 20 io port: [1840, 185f] PCI: 0000:00:1d.3 reg 20 io port: [1860, 187f] PCI: 0000:00:1d.7 reg 10 32bit mmio: [a8000000, a80003ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled PCI: 0000:00:1e.2 reg 10 io port: [1c00, 1cff] PCI: 0000:00:1e.2 reg 14 io port: [1880, 18bf] PCI: 0000:00:1e.2 reg 18 32bit mmio: [a8000800, a80009ff] PCI: 0000:00:1e.2 reg 1c 32bit mmio: [a8000400, a80004ff] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold pci 0000:00:1e.2: PME# disabled PCI: 0000:00:1e.3 reg 10 io port: [2400, 24ff] PCI: 0000:00:1e.3 reg 14 io port: [2000, 207f] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold pci 0000:00:1e.3: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO PCI: 0000:00:1f.2 reg 10 io port: [0, 7] PCI: 0000:00:1f.2 reg 14 io port: [0, 3] PCI: 0000:00:1f.2 reg 18 io port: [0, 7] PCI: 0000:00:1f.2 reg 1c io port: [0, 3] PCI: 0000:00:1f.2 reg 20 io port: [18c0, 18cf] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled PCI: 0000:00:1f.3 reg 20 io port: [18e0, 18ff] PCI: 0000:01:00.0 reg 10 32bit mmio: [c0000000, c7ffffff] PCI: 0000:01:00.0 reg 14 io port: [3000, 30ff] PCI: 0000:01:00.0 reg 18 32bit mmio: [a8100000, a810ffff] PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff] pci 0000:01:00.0: supports D1 pci 0000:01:00.0: supports D2 PCI: bridge 0000:00:01.0 io port: [3000, 3fff] PCI: bridge 0000:00:01.0 32bit mmio: [a8100000, a81fffff] PCI: bridge 0000:00:01.0 32bit mmio pref: [c0000000, c7ffffff] PCI: 0000:02:00.0 reg 10 64bit mmio: [a8200000, a820ffff] pci 0000:02:00.0: PME# supported from D3hot D3cold pci 0000:02:00.0: PME# disabled PCI: bridge 0000:00:1c.0 32bit mmio: [a8200000, a82fffff] PCI: bridge 0000:00:1c.2 io port: [4000, 4fff] PCI: bridge 0000:00:1c.2 32bit mmio: [a8300000, a83fffff] PCI: bridge 0000:00:1c.2 64bit mmio pref: [c8000000, c80fffff] PCI: 0000:04:00.0 reg 10 32bit mmio: [a8400000, a8400fff] pci 0000:04:00.0: supports D1 pci 0000:04:00.0: supports D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled PCI: 0000:04:00.1 reg 10 32bit mmio: [b1000000, b10007ff] pci 0000:04:00.1: PME# supported from D0 D3hot D3cold pci 0000:04:00.1: PME# disabled PCI: 0000:04:02.0 reg 10 32bit mmio: [a8401000, a8401fff] pci 0000:04:02.0: PME# supported from D0 D3hot D3cold pci 0000:04:02.0: PME# disabled pci 0000:00:1e.0: transparent bridge PCI: bridge 0000:00:1e.0 io port: [5000, 8fff] PCI: bridge 0000:00:1e.0 32bit mmio: [a8400000, b7ffffff] PCI: bridge 0000:00:1e.0 64bit mmio pref: [d0000000, d7ffffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb dca service started, version 1.4 PCI: Using ACPI for IRQ routing hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff could not be reserved system 00:00: iomem range 0xcc000-0xcffff could not be reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x1fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x1641 has been reserved system 00:02: ioport range 0x1644-0x167f has been reserved system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved system 00:02: iomem range 0xf0008000-0xf000bfff could not be reserved system 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x3000-0x3fff pci 0000:00:01.0: MEM window: 0xa8100000-0xa81fffff pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000c7ffffff pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: 0xa8200000-0xa82fffff pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0x4000-0x4fff pci 0000:00:1c.2: MEM window: 0xa8300000-0xa83fffff pci 0000:00:1c.2: PREFETCH window: 0x000000c8000000-0x000000c80fffff pci 0000:04:00.0: CardBus bridge, secondary bus 0000:05 pci 0000:04:00.0: IO window: 0x005000-0x0050ff pci 0000:04:00.0: IO window: 0x005400-0x0054ff pci 0000:04:00.0: PREFETCH window: 0xd0000000-0xd3ffffff pci 0000:04:00.0: MEM window: 0xac000000-0xafffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: 0x5000-0x8fff pci 0000:00:1e.0: MEM window: 0xa8400000-0xb7ffffff pci 0000:00:1e.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffff] bus: 01 index 0 io port: [3000, 3fff] bus: 01 index 1 mmio: [a8100000, a81fffff] bus: 01 index 2 mmio: [c0000000, c7ffffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 mmio: [0, 0] bus: 02 index 1 mmio: [a8200000, a82fffff] bus: 02 index 2 mmio: [0, 0] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 io port: [4000, 4fff] bus: 03 index 1 mmio: [a8300000, a83fffff] bus: 03 index 2 mmio: [c8000000, c80fffff] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 io port: [5000, 8fff] bus: 04 index 1 mmio: [a8400000, b7ffffff] bus: 04 index 2 mmio: [d0000000, d7ffffff] bus: 04 index 3 io port: [0, ffff] bus: 04 index 4 mmio: [0, ffffffff] bus: 05 index 0 io port: [5000, 50ff] bus: 05 index 1 io port: [5400, 54ff] bus: 05 index 2 mmio: [d0000000, d3ffffff] bus: 05 index 3 mmio: [ac000000, afffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1234911984.164:1): initialized I-pipe: Domain Xenomai registered. Xenomai: hal/i386 started. Xenomai: real-time nucleus v2.4.6 (Bamboo) loaded. Xenomai: SMI-enabled chipset found, but SMI workaround disabled (check CONFIG_XENO_HW_SMI_WORKAROUND). You may encounter high interrupt latencies! Xenomai: starting native API services. Xenomai: starting POSIX services. Xenomai: starting RTDM services. Installing knfsd (copyright (C) 1996 okir@domain.hid). msgmni has been set to 999 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device lp: driver loaded but no devices found radeonfb 0000:01:00.0: power state changed by ACPI to D0 radeonfb 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeonfb: Retrieved PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=6) Memory=300.00 Mhz, System=230.00 MHz radeonfb: PLL min 20000 max 40000 Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: Samsung LTN150P1-L02 radeonfb: detected LVDS panel size from BIOS: 1400x1050 radeondb: BIOS provided dividers will be used radeonfb: Dynamic Clock Power Management enabled fbcon: ATI Radeon 5460 (fb0) is primary device Console: switching to colour frame buffer device 175x65 radeonfb (0000:01:00.0): ATI Radeon 5460 "T`" ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] Serial: 8250/16550 driver4 ports, IRQ sharing disabled serial 00:0a: activated 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A serial 0000:00:1e.3: PCI INT B -> GSI 23 (level, low) -> IRQ 23 serial 0000:00:1e.3: PCI INT B disabled parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] lp0: using parport0 (interrupt-driven). loop: module loaded Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI Copyright (c) 1999-2006 Intel Corporation. tg3.c:v3.94 (August 14, 2008) tg3 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:02:00.0: setting latency timer to 64 eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:0a:e4:c5:98:e8 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] QLogic Fibre Channel HBA Driver: 8.02.01-k7 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18c0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18c8 irq 15 Switched to high resolution mode on CPU 0 ata1.00: ATA-6: FUJITSU MHV2060AH, 00840096, max UDMA/100 ata1.00: 117210240 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: configured for UDMA/100 ata2.00: ATAPI: MATSHITADVD-RAM UJ-830Sx, 1.00, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2060A 0084 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-830Sx 1.00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xa8000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27-gentoo-r8-xenomai ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 USB Universal Host Controller Interface driver v3.0 uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27-gentoo-r8-xenomai uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27-gentoo-r8-xenomai uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27-gentoo-r8-xenomai uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb 4-1: new full speed USB device using uhci_hcd and address 2 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27-gentoo-r8-xenomai uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 usb 4-1: configuration #1 chosen from 1 choice usb 4-1: New USB device found, idVendor=0a5c, idProduct=201e usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-1: Product: IBM Bluetooth Module usb 4-1: Manufacturer: Broadcom usb 4-2: new full speed USB device using uhci_hcd and address 3 usb 4-2: configuration #1 chosen from 1 choice usb 4-2: New USB device found, idVendor=0483, idProduct=2016 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: Biometric Coprocessor usb 4-2: Manufacturer: STMicroelectronics usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 hdaps: supported laptop not found! hdaps: driver init failed (ret=-19)! device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@domain.hid cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.17. Intel ICH 0000:00:1e.2: PCI INT A -> GSI 22 (level, low) -> IRQ 22 Intel ICH 0000:00:1e.2: setting latency timer to 64 Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4 intel8x0_measure_ac97_clock: measured 55558 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel ICH6 with AD1981B at irq 22 ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' Using IPI Shortcut mode IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 260k freed input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/device:04/input/input6 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) Linux agpgart interface v0.103 Yenta: CardBus bridge found at 0000:04:00.0 [1014:0532] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2k ipw2200: Copyright(c) 2003-2006 Intel Corporation Yenta: ISA IRQ mask 0x0c38, PCI irq 16 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x5000 - 0x8fff pcmcia: parent PCI bridge Memory window: 0xa8400000 - 0xb7ffffff pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff ipw2200 0000:04:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection firmware: requesting ipw2200-bss.fw ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2 ipw2200: Unable to load firmware: -2 ipw2200: failed to register network device ipw2200 0000:04:02.0: PCI INT A disabled ipw2200: probe of 0000:04:02.0 failed with error -5 EXT3 FS on sda3, internal journal Non-volatile memory driver v1.2 thinkpad_acpi: ThinkPad ACPI Extras v0.21 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 76ET62WW (1.22 ), EC 76HT14WW-1.04 thinkpad_acpi: IBM ThinkPad  , model 1846AQG Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi:orange:batt Registered led device: tpacpi:green:batt Registered led device: tpacpi::dock_active Registered led device: tpacpi::bay_active Registered led device: tpacpi::dock_batt Registered led device: tpacpi::unknown_led Registered led device: tpacpi::standby thinkpad_acpi: fan_init: initial fan status is unknown, assuming it is in auto mode input: ThinkPad Extra Buttons as /devices/virtual/input/input7 fuse init (API version 7.9) Adding 1020592k swap on /dev/sda4. Priority:-1 extents:1 across:1020592k thinkpad_acpi: setting the hotkey mask to 0x0000ffff is likely not the best way to go about it thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation ------------[ cut here ]------------ kernel BUG at fs/buffer.c:1289! invalid opcode: 0000 [#1] PREEMPT Modules linked in: fuse thinkpad_acpi rfkill led_class nvram ipw2200 yenta_socket intel_agp rsrc_nonstatic agpgart evdev video Pid: 5530, comm: emerge Not tainted (2.6.27-gentoo-r8-xenomai #8) EIP: 0060:[] EFLAGS: 00210296 CPU: 0 EIP is at __find_get_block+0x187/0x1b0 EAX: ffffffff EBX: 00000001 ECX: 00000000 EDX: 002848a0 ESI: 00000000 EDI: 002848a0 EBP: 00000000 ESP: de0efc40 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 Process emerge (pid: 5530, ti=de0ee000 task=df182af0 task.ti=de0ee000)<0> I-pipe domain Linux Stack: df402900 df106130 c02bde96 de0efc68 c02bed95 00000001 df106130 df7eb89c 002848a0 00000001 00000000 df7eb924 00000000 c01c8b73 00001000 00000000 000000d0 df8c8840 de0efcb4 002848a0 00000000 df402900 df34b5c0 00000000 Call Trace: [] elv_insert+0x156/0x220 [] drive_stat_acct+0x105/0x110 [] __getblk+0x23/0x2a0 [] ext3_getblk+0xb9/0x1d0 [] ext3_find_entry+0x215/0x640 [] submit_bio+0x6b/0xf0 [] __ipipe_dispatch_wired+0xa3/0xe0 [] __ipipe_handle_irq+0x8d/0x1e0 [] finish_task_switch+0x28/0x90 [] dput+0x1c/0x160 [] mntput_no_expire+0x13/0xf0 [] __link_path_walk+0x309/0xc80 [] ext3_lookup+0x3e/0xd0 [] d_alloc+0x1b/0x190 [] do_lookup+0x176/0x1a0 [] __link_path_walk+0x754/0xc80 [] path_walk+0x40/0x90 [] do_path_lookup+0x7b/0x190 [] getname+0x9a/0xf0 [] user_path_at+0x37/0x70 [] __virq_end+0x0/0xb [] update_console_cmdline+0x70/0x90 [] vfs_stat_fd+0x22/0x60 [] sys_stat64+0xf/0x30 [] dput+0x1c/0x160 [] __fput+0x10a/0x190 [] mntput_no_expire+0x13/0xf0 [] filp_close+0x47/0x80 [] sys_close+0x60/0xc0 [] sysenter_do_call+0x12/0x16 ======================= Code: 89 d8 e8 fd fd ff ff eb 84 89 d6 8d 56 ff 8b 04 95 e0 59 73 c0 85 d2 89 04 b5 e0 59 73 c0 75 e9 89 1d e0 59 73 c0 e9 e1 fe ff ff <0f> 0b eb fe 90 8d 74 26 00 e8 fb e9 36 00 e9 ec fe ff ff 8d b6 EIP: [] __find_get_block+0x187/0x1b0 SS:ESP 0068:de0efc40 ---[ end trace ca60ca60b291a95f ]---