All of lore.kernel.org
 help / color / mirror / Atom feed
From: unsik Kim <donari75@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [U-BOOT][PATCH 1/4] mflash : Change MG_BASE define to inline function
Date: Wed, 18 Feb 2009 19:51:34 +0900	[thread overview]
Message-ID: <499BE836.7020204@gmail.com> (raw)

Signed-off-by: unsik Kim <donari75@gmail.com>
---
  drivers/block/mg_disk.c |   45 ++++++++++++++++++++++++---------------------
  1 files changed, 24 insertions(+), 21 deletions(-)

diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index bbfeeda..26b6a80 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -34,10 +34,13 @@

  #define MG_RES_SEC ((CONFIG_MG_DISK_RES) << 1)

-#define MG_BASE	(host.drv_data->base)
-
  static struct mg_host host;

+static inline u32 mg_base(void)
+{
+	return host.drv_data->base;
+}
+
  static block_dev_desc_t mg_disk_dev = {
  	.if_type = IF_TYPE_ATAPI,
  	.part_type = PART_TYPE_UNKNOWN,
@@ -122,7 +125,7 @@ static unsigned int mg_wait (u32 expect, u32 msec)
  	reset_timer();
  	from = get_timer(0);

-	status = readb(MG_BASE + MG_REG_STATUS);
+	status = readb(mg_base() + MG_REG_STATUS);
  	do {
  		cur = get_timer(from);
  		if (status & MG_REG_STATUS_BIT_BUSY) {
@@ -131,7 +134,7 @@ static unsigned int mg_wait (u32 expect, u32 msec)
  		} else {
  			/* Check the error condition! */
  			if (status & MG_REG_STATUS_BIT_ERROR) {
-				err = readb(MG_BASE + MG_REG_ERROR);
+				err = readb(mg_base() + MG_REG_ERROR);
  				mg_dump_status("mg_wait", status, err);
  				break;
  			}
@@ -144,7 +147,7 @@ static unsigned int mg_wait (u32 expect, u32 msec)
  				if (status & MG_REG_STATUS_BIT_DATA_REQ)
  					break;
  		}
-		status = readb(MG_BASE + MG_REG_STATUS);
+		status = readb(mg_base() + MG_REG_STATUS);
  	} while (cur < msec);

  	if (cur >= msec)
@@ -160,15 +163,15 @@ static int mg_get_disk_id (void)
  	u32 i, err, res;
  	u16 *buff = (u16 *)iobuf;

-	writeb(MG_CMD_ID, MG_BASE + MG_REG_COMMAND);
+	writeb(MG_CMD_ID, mg_base() + MG_REG_COMMAND);
  	err = mg_wait(MG_REG_STATUS_BIT_DATA_REQ, 3000);
  	if (err)
  		return err;

  	for(i = 0; i < (MG_SECTOR_SIZE / sizeof(u32)) >> 1; i++)
-		buff[i] = readw(MG_BASE + MG_BUFF_OFFSET + i * 2);
+		buff[i] = readw(mg_base() + MG_BUFF_OFFSET + i * 2);

-	writeb(MG_CMD_RD_CONF, MG_BASE + MG_REG_COMMAND);
+	writeb(MG_CMD_RD_CONF, mg_base() + MG_REG_COMMAND);
  	err = mg_wait(MG_STAT_READY, 3000);
  	if (err)
  		return err;
@@ -235,18 +238,18 @@ static int mg_disk_reset (void)

  	/* soft reset on */
  	writeb(MG_REG_CTRL_RESET | MG_REG_CTRL_INTR_DISABLE,
-		MG_BASE + MG_REG_DRV_CTRL);
+		mg_base() + MG_REG_DRV_CTRL);
  	err = mg_wait(MG_REG_STATUS_BIT_BUSY, 3000);
  	if(err)
  		return err;

  	/* soft reset off */
-	writeb(MG_REG_CTRL_INTR_DISABLE, MG_BASE + MG_REG_DRV_CTRL);
+	writeb(MG_REG_CTRL_INTR_DISABLE, mg_base() + MG_REG_DRV_CTRL);
  	err = mg_wait(MG_STAT_READY, 3000);
  	if(err)
  		return err;

-	init_status = readb(MG_BASE + MG_REG_STATUS) & 0xf;
+	init_status = readb(mg_base() + MG_REG_STATUS) & 0xf;

  	if (init_status == 0xf)
  		return MG_ERR_INIT_STAT;
@@ -265,13 +268,13 @@ static unsigned int mg_out(unsigned int sect_num,
  	if (err)
  		return err;

-	writeb((u8)sect_cnt, MG_BASE + MG_REG_SECT_CNT);
-	writeb((u8)sect_num, MG_BASE + MG_REG_SECT_NUM);
-	writeb((u8)(sect_num >> 8), MG_BASE + MG_REG_CYL_LOW);
-	writeb((u8)(sect_num >> 16), MG_BASE + MG_REG_CYL_HIGH);
+	writeb((u8)sect_cnt, mg_base() + MG_REG_SECT_CNT);
+	writeb((u8)sect_num, mg_base() + MG_REG_SECT_NUM);
+	writeb((u8)(sect_num >> 8), mg_base() + MG_REG_CYL_LOW);
+	writeb((u8)(sect_num >> 16), mg_base() + MG_REG_CYL_HIGH);
  	writeb((u8)((sect_num >> 24) | MG_REG_HEAD_LBA_MODE),
-		MG_BASE + MG_REG_DRV_HEAD);
-	writeb(cmd, MG_BASE + MG_REG_COMMAND);
+		mg_base() + MG_REG_DRV_HEAD);
+	writeb(cmd, mg_base() + MG_REG_COMMAND);

  	return err;
  }
@@ -293,11 +296,11 @@ static unsigned int mg_do_read_sects(void *buff, u32 sect_num, u32 sect_cnt)
  		/* TODO : u16 unaligned case */
  		for(j = 0; j < MG_SECTOR_SIZE >> 1; j++) {
  			*(u16 *)buff_ptr =
-				readw(MG_BASE + MG_BUFF_OFFSET + (j << 1));
+				readw(mg_base() + MG_BUFF_OFFSET + (j << 1));
  			buff_ptr += 2;
  		}

-		writeb(MG_CMD_RD_CONF, MG_BASE + MG_REG_COMMAND);
+		writeb(MG_CMD_RD_CONF, mg_base() + MG_REG_COMMAND);

  		MG_DBG("%u (0x%8.8x) sector read", sect_num + i,
  			(sect_num + i) * MG_SECTOR_SIZE);
@@ -426,11 +429,11 @@ static int mg_do_write_sects(void *buff, u32 sect_num, u32 sect_cnt)
  		/* TODO : u16 unaligned case */
  		for(j = 0; j < MG_SECTOR_SIZE >> 1; j++) {
  			writew(*(u16 *)buff_ptr,
-				MG_BASE + MG_BUFF_OFFSET + (j << 1));
+				mg_base() + MG_BUFF_OFFSET + (j << 1));
  			buff_ptr += 2;
  		}

-		writeb(MG_CMD_WR_CONF, MG_BASE + MG_REG_COMMAND);
+		writeb(MG_CMD_WR_CONF, mg_base() + MG_REG_COMMAND);

  		MG_DBG("%u (0x%8.8x) sector write",
  			sect_num + i, (sect_num + i) * MG_SECTOR_SIZE);
-- 
1.5.6.6

                 reply	other threads:[~2009-02-18 10:51 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=499BE836.7020204@gmail.com \
    --to=donari75@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.