From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rudolf Marek Date: Wed, 18 Feb 2009 21:34:28 +0000 Subject: Re: [lm-sensors] w83793 driver for RHEL 5.2 x86_64 Message-Id: <499C7EE4.5070200@assembler.cz> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org Hi, Please CC the lm-sensors list. Well the new version is in Linux kernel 2.6.20. Please try with some more n= ew=20 version of kernel. What motherboard model/manufacturer it is? In the meanwhile please can you try as root: rmmod w83793 modprobe i2c-dev i2cdump 0 0x2f It should dump raw register data of the chip. Thanks, Rudolf maluyao napsal(a): > Hi >=20 > I'm using RHEL 5.3 X86_64.The kernel version is 2.6.18-128.el5. The=20 > lm_sensors is 3.0.2 and/or 2.10.7-4.el5. >=20 > I got a drvier code from here : > http://jdelvare.pck.nerim.net/sensors/w83793/ >=20 > This driver works not so fine because some of temperature show me -1=B0C= =20 > sometimes. > for example: >=20 > w83793-i2c-0-2f > Adapter: SMBus I801 adapter at 1100 > CPU1 Temp: -1.8=B0C (high =3D -1.0=B0C, hyst =3D -1.0=B0C) ALARM = sensor =3D=20 > Intel PECI > CPU2 Temp: -1.8=B0C (high =3D -1.0=B0C, hyst =3D -1.0=B0C) ALARM = sensor =3D=20 > Intel PECI > temp3: -1.8=B0C (high =3D -1.0=B0C, hyst =3D -1.0=B0C) ALARM = sensor =3D=20 > Intel PECI > temp4: -1.8=B0C (high =3D -1.0=B0C, hyst =3D -1.0=B0C) ALARM = sensor =3D=20 > Intel PECI > temp5: -1.0=B0C (high =3D -1.0=B0C, hyst =3D -1.0=B0C) ALARM = sensor =3D=20 > thermistor > beep_enable:enabled >=20 >=20 > Have you have new driver for this version of Linux Kernel ? >=20 > Best Regards >=20 > maluyao@gmail.com >=20 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors