From: Laurent Haond <lhaond@bearstech.com>
To: linux-media@vger.kernel.org
Subject: Re: [linux-dvb] Can I use AVerTV Volar Black HD (A850) with Linux ?
Date: Sat, 21 Feb 2009 13:09:46 +0100 [thread overview]
Message-ID: <499FEF0A.2070001@bearstech.com> (raw)
In-Reply-To: <7a3c9e3d0902210108w77e440e2u6d688f3614ccf972@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2776 bytes --]
Hi,
I enabled debug on dvb-usb, here you can find my dmesg output :
usb 4-3: new high speed USB device using ehci_hcd and address 12
usb 4-3: configuration #1 chosen from 1 choice
af9015_usb_probe: interface:0
af9015_read_config: IR mode:0
af9015_read_config: TS mode:1
af9015_read_config: [0] xtal:2 set adc_clock:28000
af9015_read_config: [0] IF1:36125
af9015_read_config: [0] MT2060 IF1:0
af9015_read_config: [0] tuner id:13
af9015_read_config: [1] xtal:2 set adc_clock:28000
af9015_read_config: [1] IF1:36125
af9015_read_config: [1] MT2060 IF1:1220
af9015_read_config: [1] tuner id:130
af9015_identify_state: reply:01
dvb-usb: found a 'AVerMedia A850' in cold state, will try to load a firmware
firmware: requesting dvb-usb-af9015.fw
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
af9015_download_firmware:
dvb-usb: found a 'AVerMedia A850' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (AVerMedia A850)
af9015_af9013_frontend_attach: init I2C
af9015_i2c_init:
00: 2c 85 a3 0b 00 00 00 00 ca 07 0a 85 01 01 01 02
10: 03 80 00 fa fa 10 40 ef 00 30 31 30 31 30 37 30
20: 33 30 37 30 30 30 30 31 ff ff ff ff ff ff ff ff
30: 01 01 38 01 00 08 02 01 1d 8d 00 00 0d ff ff ff
40: ff ff ff ff ff 08 02 00 1d 8d c4 04 82 ff ff ff
50: ff ff ff ff ff 26 00 00 04 03 09 04 14 03 41 00
60: 56 00 65 00 72 00 4d 00 65 00 64 00 69 00 61 00
70: 14 03 41 00 38 00 35 00 30 00 20 00 44 00 56 00
80: 42 00 54 00 20 03 33 00 30 00 31 00 34 00 37 00
90: 35 00 33 00 30 00 31 00 32 00 34 00 30 00 30 00
a0: 30 00 30 00 00 ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
af9013: firmware version:4.95.0
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
af9015_tuner_attach:
MXL5005S: Attached at address 0xc6
dvb-usb: will pass the complete MPEG2 transport stream to the software
demuxer.
DVB: registering new adapter (AVerMedia A850)
af9015_copy_firmware:
af9015: command failed:2
af9015: firmware copy to 2nd frontend failed, will disable it
dvb-usb: no frontend was attached by 'AVerMedia A850'
dvb-usb: AVerMedia A850 successfully initialized and connected.
af9015_init:
af9015_init_endpoint: USB speed:3
af9015_download_ir_table:
dvbscan fails with this error : Unable to query frontend status
and sometimes (not everytimes) dmesg shows :
af9015: recv bulk message failed:-110
af9013: I2C read failed reg:d417
Tried Kaffeine, did not work either...
Laurent
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]
next prev parent reply other threads:[~2009-02-21 12:09 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-21 1:09 [linux-dvb] Can I use AVerTV Volar Black HD (A850) with Linux ? Laurent Haond
[not found] ` <7a3c9e3d0902210108w77e440e2u6d688f3614ccf972@mail.gmail.com>
2009-02-21 12:09 ` Laurent Haond [this message]
2009-02-21 16:38 ` Antti Palosaari
2009-02-22 13:53 ` Laurent Haond
2009-02-22 18:05 ` CityK
-- strict thread matches above, loose matches on Subject: below --
2009-02-21 1:07 Laurent Haond
2009-02-19 19:29 Thomas RENARD
2009-02-19 20:15 ` Antti Palosaari
2009-02-20 21:56 ` Thomas RENARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=499FEF0A.2070001@bearstech.com \
--to=lhaond@bearstech.com \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.