From: Antti Palosaari <crope@iki.fi>
To: Dmitri Belimov via Mercurial <d.belimov@gmail.com>,
linux-media@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@infradead.org>,
Christopher Pascoe <c.pascoe@itee.uq.edu.au>
Subject: Re: [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353
Date: Sat, 21 Feb 2009 19:32:04 +0200 [thread overview]
Message-ID: <49A03A94.9030008@iki.fi> (raw)
In-Reply-To: <E1LHmrf-0004LH-VV@www.linuxtv.org>
Hello,
This patch breaks devices using tuner behind zl10353 i2c-gate.
au6610:
Sigmatek DVB-110 DVB-T USB2.0
gl861:
MSI Mega Sky 55801 DVB-T USB2.0
A-LINK DTU DVB-T USB2.0
Probably some other too.
I think it is better to disable i2c-gate setting callback to NULL after
demod attach like dtv5100 does this.
Also .no_tuner is bad name what it does currently. My opinion is that
current .no_tuner = 1 should be set as default, because most
configuration does not this kind of slave tuner setup where tuner is
programmed by demod.
Change no_tuner to slave_tuner and set slave_tuner = 1 only when needed
(not many drivers using that).
Here is small scheme to clear tuner cotrolling issues.
http://www.otit.fi/~crope/v4l-dvb/controlling_tuner.txt
regards
Antti
Patch from Dmitri Belimov wrote:
> The patch number 10151 was added via Mauro Carvalho Chehab <mchehab@redhat.com>
> to http://linuxtv.org/hg/v4l-dvb master development tree.
>
> Kernel patches in this development tree may be modified to be backward
> compatible with older kernels. Compatibility modifications will be
> removed before inclusion into the mainstream Kernel
>
> If anyone has any objections, please let us know by sending a message to:
> v4l-dvb-maintainer@linuxtv.org
>
> ------
>
> From: Dmitri Belimov <d.belimov@gmail.com>
> Fix I2C bridge error in zl10353
>
>
> Fix I2C bridge error in zl10353 if no tunner attached to internal I2C
> bus of zl10353 chip.
>
> When set enable bridge from internal I2C bus to the main I2C bus
> (saa7134) the main I2C bus stopped very hardly. No any communication. In
> our next board we solder additional resistors to internal I2C bus.
>
> Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com>
> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
>
>
> ---
>
> linux/drivers/media/dvb/frontends/zl10353.c | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff -r 166b13cf6fcd -r 24e51eac4234 linux/drivers/media/dvb/frontends/zl10353.c
> --- a/linux/drivers/media/dvb/frontends/zl10353.c Wed Nov 12 15:04:28 2008 +0000
> +++ b/linux/drivers/media/dvb/frontends/zl10353.c Tue Dec 23 06:50:09 2008 +0000
> @@ -598,7 +598,14 @@ static int zl10353_init(struct dvb_front
>
> static int zl10353_i2c_gate_ctrl(struct dvb_frontend* fe, int enable)
> {
> + struct zl10353_state *state = fe->demodulator_priv;
> u8 val = 0x0a;
> +
> + if (state->config.no_tuner) {
> + /* No tuner attached to the internal I2C bus */
> + /* If set enable I2C bridge, the main I2C bus stopped hardly */
> + return 0;
> + }
>
> if (enable)
> val |= 0x10;
>
>
> ---
>
> Patch is available at: http://linuxtv.org/hg/v4l-dvb/rev/24e51eac4234f118d51b386c6e3168e8d8f461ae
>
> _______________________________________________
> linuxtv-commits mailing list
> linuxtv-commits@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linuxtv-commits
--
http://palosaari.fi/
next parent reply other threads:[~2009-02-21 17:32 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <E1LHmrf-0004LH-VV@www.linuxtv.org>
2009-02-21 17:32 ` Antti Palosaari [this message]
2009-03-10 10:09 ` [linuxtv-commits] [hg:v4l-dvb] Fix I2C bridge error in zl10353 Antti Palosaari
2009-03-10 12:40 ` Mauro Carvalho Chehab
2009-03-10 13:08 ` Dmitri Belimov
2009-03-10 13:14 ` Antti Palosaari
2009-03-10 16:12 ` Antti Palosaari
2009-03-11 1:39 ` Dmitri Belimov
2009-03-12 3:35 ` Dmitri Belimov
2009-03-12 10:15 ` Mauro Carvalho Chehab
2009-03-12 10:20 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49A03A94.9030008@iki.fi \
--to=crope@iki.fi \
--cc=c.pascoe@itee.uq.edu.au \
--cc=d.belimov@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.