From: Lukasz Majewski <majess1982@gmail.com>
To: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Marc Kleine-Budde <m.kleine-budde@pengutronix.de>,
linux-rt-users@vger.kernel.org
Subject: Re: [linux-2.6.26.8-rt14] RT Page Fault.
Date: Tue, 24 Feb 2009 01:00:24 +0100 [thread overview]
Message-ID: <49A33898.5010000@gmail.com> (raw)
In-Reply-To: <20090223204656.GO5367@pengutronix.de>
Hello Robert,
I've tried to build toolchain using the following ptxconfig file:
./ptxconfigs/arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized
I've also (as You advice) downloaded and used
OSELAS.Toolchain-1.99.3.1.tar.bz2
Then I've started building of my toolchain with
lukma@xxx:~/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1$ ../bin/ptxdist go
I've encountered following error (I hope that it's long enough to track
it down.):
gawk -f ../scripts/gen-as-const.awk ../ports/sysdeps/arm/nptl/tcb-offsets.sym \
| /usr/bin/gcc -S -o /home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8-crt-build/tcb-offsets.hT3 -std=gnu99 -fgnu89-inline -O2 -Wall -Winline -Wwrite-strings -fmerge-all-constants -g -Wstrict-prototypes -I../include -I/home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8-crt-build/csu -I/home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8-crt-build -I../ports/sysdeps/arm/elf -I../ports/sysdeps/unix/sysv/linux/arm/eabi/nptl
-I../ports/sysdeps/unix/sysv/linux/arm/eabi -I../ports/sysdeps/unix/sysv/linux/arm/nptl -I../ports/sysdeps/unix/sysv/linux/arm -I../ports/sysdeps/unix/sysv/linux -I../nptl/sysdeps/unix/sysv/linux -I../nptl/sysdeps/pthread -I../sysdeps/pthread -I../sysdeps/unix/sysv/linux -I../sysdeps/gnu -I../sysdeps/unix/common -I../sysdeps/unix/mman -I../sysdeps/unix/inet -I../ports/sysdeps/unix/sysv -I../nptl/sysdeps/unix/sysv -I../sysdeps/unix/sysv -I../ports/sysdeps/unix/arm -I../ports/sysdeps/unix -I../nptl/sysdeps/unix -I../sysdeps/unix -I../sysdeps/posix -I../ports/sysdeps/arm/eabi -I../ports/sysdeps/arm/nptl -I../ports/sysdeps/arm -I../sysdeps/wordsize-32 -I../sysdeps/ieee754/flt-32 -I../sysdeps/ieee754/dbl-64 -I../sysdeps/ieee754 -I../sysdeps/generic/elf -I../sysdeps/generic -I../ports -I../np
tl -I.. -I../libio -I. -nostdinc -isystem /usr/lib/gcc/i486-linux-gnu/4.2.4/include -isystem /home/lukma/sbox_lukma/tools/arm-d940/arm-v5te-linux-gnueabi/gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/sysroot-arm-v5te-linux-gnueabi/usr/include -D_LIBC_REENTRANT -include ../include/libc-symbols.h -DHAVE_INITFINI -x c - \
-MD -MP -MF /home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8-crt-build/tcb-offsets.h.dT -MT '/home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8-crt-build/tcb-offsets.h.d /home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8-crt-build/tcb-offsets.h'
In file included from ../include/tls.h:6,
from ../ports/sysdeps/unix/sysv/linux/arm/eabi/sysdep.h:28,
from <stdin>:1:
../ports/sysdeps/arm/nptl/tls.h:48:3: error: #error "TLS support is required."
In file included from ../include/tls.h:6,
from ../include/link.h:45,
from ../include/dlfcn.h:3,
from ../sysdeps/generic/ldsodefs.h:32,
from ../ports/sysdeps/arm/ldsodefs.h:39,
from ../sysdeps/unix/sysv/linux/ldsodefs.h:25,
from <stdin>:2:
../ports/sysdeps/arm/nptl/tls.h:48:3: error: #error "TLS support is required."
In file included from ../ports/sysdeps/arm/nptl/tls.h:57,
from ../include/tls.h:6,
from ../include/link.h:45,
from ../include/dlfcn.h:3,
from ../sysdeps/generic/ldsodefs.h:32,
from ../ports/sysdeps/arm/ldsodefs.h:39,
from ../sysdeps/unix/sysv/linux/ldsodefs.h:25,
from <stdin>:2:
../ports/sysdeps/unix/sysv/linux/arm/eabi/sysdep.h:31:3: error: #error Kernel headers are too old
In file included from <stdin>:1:
../ports/sysdeps/unix/sysv/linux/arm/eabi/sysdep.h:31:3: error: #error Kernel headers are too old
make[3]: *** [/home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8-crt-build/rtld-global-offsets.h] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: *** [/home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8-crt-build/tcb-offsets.h] Error 1
make[3]: Leaving directory `/home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8/csu'
make[2]: *** [csu/subdir_lib] Error 2
make[2]: Leaving directory `/home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8'
make[1]: Leaving directory `/home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/build-target/glibc-2.8-crt-build'
make[1]: *** [csu/subdir_lib] Error 2
make: *** [/home/lukma/sbox_lukma/build-tools/OSELAS.Toolchain-1.99.3.1/platform-arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized/state/glibc-crt.compile] Error 2
I don't know what kind of error it is.
My host PC is running at Ubuntu 2.6.24-22-generic with gcc 4.2.4. I've
only changed target directory from '/opt' to
'/home/lukma/sbox_lukma/tools' with "ptxdist menuconfig". Above error is
the same for
OSELAS.Toolchain-1.99.3 and OSELAS.Toolchain-1.99.3.1
Regards,
Lukasz.
Robert Schwebel wrote:
> Hi Lukasz,
>
> On Mon, Feb 23, 2009 at 05:21:36PM +0100, Lukasz Majewski wrote:
>
>> I'm building toolchain for AT572D940HF Atmel chip. It's ARM9 combined
>> with DSP. I'd like to build toolchain for ARM9 (ARMv5tej) with
>> -msoft-float support, EABI and full glibc ,to support all stuff
>> connected with PREEMPT_RT patch - especially librt.
>>
>
> Ok.
>
>
>> Now I've downloaded:
>> ptxdist-1.99.11 and ptxdist-1.99.11-patches.
>>
>
> yup
>
>
>> and
>> OSELAS.Toolchain-1.99.3
>>
>
> exactly
>
>
>> I've selected
>> ./ptxconfigs/arm-v5te-linux-gnueabi-gcc-4.3.2-glibc-2.8-binutils-2.18-kernel-2.6.27-sanitized
>>
>> I need toolchain with -msoft-float support and EABI.
>>
>
> The toolchain you've selected above actually is softfloat and EABI. You
> don't have to change anything, just do the steps you've mentioned above
> and 'ptxdist go'.
>
>
>> Unfortunately there is an error about mismatch in the linux-kernel
>> headers.
>>
>
> Please send the exact error message (if too long, please off-list, to me
> and "Marc Kleine-Budde <m.kleine-budde@pengutronix.de>").
>
>
>> My Host PC has linux-kernel of 2.6.24 and not 2.6.27.
>>
>
> That's no problem; the toolchain you are trying to build is based on the
> 2.6.27 sanitized kernel headers. It's usually no problem at all using
> such a toolchain on a variety of other kernel versions.
>
>
>> My target is working under 2.6.26.8-rt14 kernel.
>>
>
> Should work.
>
>
>> The error is in building of NTPL library, after successfully compilation
>> of gcc compiler.
>>
>> How can I provide proper kernel headers?
>>
>
> See above, error messages, please.
>
>
>> Now I'm trying with
>> arm-v5te-linux-gnueabi-gcc-4.1.2-glibc-2.5-binutils-2.17-kernel-2.6.18
>> ptxconfig. I hope that this will be sufficiently new to provide priority
>> inheritance, futexes , librt with all features.
>>
>
> Yes, it is.
>
>
>> I'm building it now and hope that I won't encounter any problems.
>>
>
> You may want to check that we have an update for 1.99.3 here:
> http://www.pengutronix.de/oselas/toolchain/download/OSELAS.Toolchain-1.99.3.1.tar.bz2
>
> There has been a build error on some distros and it might happen that
> you are seeing exactly this issue.
>
> rsc
>
prev parent reply other threads:[~2009-02-24 0:00 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-22 20:49 [linux-2.6.26.8-rt14] RT Page Fault Lukasz Majewski
2009-02-22 21:29 ` Remy Bohmer
2009-02-22 23:01 ` Lukasz Majewski
2009-02-23 10:12 ` Remy Bohmer
2009-02-23 12:40 ` Robert Schwebel
2009-02-23 16:21 ` Lukasz Majewski
2009-02-23 20:46 ` Robert Schwebel
2009-02-24 0:00 ` Lukasz Majewski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49A33898.5010000@gmail.com \
--to=majess1982@gmail.com \
--cc=linux-rt-users@vger.kernel.org \
--cc=m.kleine-budde@pengutronix.de \
--cc=r.schwebel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.