From: John Daiker <daikerjohn@gmail.com>
To: linux-wireless@vger.kernel.org
Cc: mb@bu3sch.de, stefano.brivio@polimi.it
Subject: b43: checkpatch.pl cleanups
Date: Tue, 24 Feb 2009 02:16:42 -0800 [thread overview]
Message-ID: <49A3C90A.2000608@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 195 bytes --]
Keeping this one simple.
Changing a few "foo * bar" to "foo *bar"
Removes 22 checkpatch.pl errors, with no introduced warnings.
John
Signed-off-by: John Daiker <daikerjohn@gmail.com>
---
[-- Attachment #2: b43.checkpatch.cleanup.diff --]
[-- Type: text/x-diff, Size: 9784 bytes --]
diff --git a/drivers/net/wireless/b43/debugfs.c b/drivers/net/wireless/b43/debugfs.c
index e04fc91..08781b6 100644
--- a/drivers/net/wireless/b43/debugfs.c
+++ b/drivers/net/wireless/b43/debugfs.c
@@ -51,8 +51,8 @@ struct b43_debugfs_fops {
};
static inline
-struct b43_dfs_file * fops_to_dfs_file(struct b43_wldev *dev,
- const struct b43_debugfs_fops *dfops)
+struct b43_dfs_file *fops_to_dfs_file(struct b43_wldev *dev,
+ const struct b43_debugfs_fops *dfops)
{
void *p;
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 6d65a02..7d80cec 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1254,8 +1254,8 @@ static inline int should_inject_overflow(struct b43_dmaring *ring)
}
/* Static mapping of mac80211's queues (priorities) to b43 DMA rings. */
-static struct b43_dmaring * select_ring_by_priority(struct b43_wldev *dev,
- u8 queue_prio)
+static struct b43_dmaring *select_ring_by_priority(struct b43_wldev *dev,
+ u8 queue_prio)
{
struct b43_dmaring *ring;
diff --git a/drivers/net/wireless/b43/lo.c b/drivers/net/wireless/b43/lo.c
index 6a18a14..325e4ad 100644
--- a/drivers/net/wireless/b43/lo.c
+++ b/drivers/net/wireless/b43/lo.c
@@ -36,8 +36,8 @@
#include <linux/sched.h>
-static struct b43_lo_calib * b43_find_lo_calib(struct b43_txpower_lo_control *lo,
- const struct b43_bbatt *bbatt,
+static struct b43_lo_calib *b43_find_lo_calib(struct b43_txpower_lo_control *lo,
+ const struct b43_bbatt *bbatt,
const struct b43_rfatt *rfatt)
{
struct b43_lo_calib *c;
@@ -138,7 +138,7 @@ static u16 lo_measure_feedthrough(struct b43_wldev *dev,
* "pad_mix_gain" is the PAD Mixer Gain.
*/
static u16 lo_txctl_register_table(struct b43_wldev *dev,
- u16 * value, u16 * pad_mix_gain)
+ u16 *value, u16 *pad_mix_gain)
{
struct b43_phy *phy = &dev->phy;
u16 reg, v, padmix;
@@ -754,9 +754,9 @@ static void lo_probe_loctls_statemachine(struct b43_wldev *dev,
}
static
-struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev,
- const struct b43_bbatt *bbatt,
- const struct b43_rfatt *rfatt)
+struct b43_lo_calib *b43_calibrate_lo_setting(struct b43_wldev *dev,
+ const struct b43_bbatt *bbatt,
+ const struct b43_rfatt *rfatt)
{
struct b43_phy *phy = &dev->phy;
struct b43_phy_g *gphy = phy->g;
@@ -824,9 +824,9 @@ struct b43_lo_calib * b43_calibrate_lo_setting(struct b43_wldev *dev,
/* Get a calibrated LO setting for the given attenuation values.
* Might return a NULL pointer under OOM! */
static
-struct b43_lo_calib * b43_get_calib_lo_settings(struct b43_wldev *dev,
- const struct b43_bbatt *bbatt,
- const struct b43_rfatt *rfatt)
+struct b43_lo_calib *b43_get_calib_lo_settings(struct b43_wldev *dev,
+ const struct b43_bbatt *bbatt,
+ const struct b43_rfatt *rfatt)
{
struct b43_txpower_lo_control *lo = dev->phy.g->lo_control;
struct b43_lo_calib *c;
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index c788bad..8bf49a5 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -500,7 +500,7 @@ void b43_shm_write16(struct b43_wldev *dev, u16 routing, u16 offset, u16 value)
}
/* Read HostFlags */
-u64 b43_hf_read(struct b43_wldev * dev)
+u64 b43_hf_read(struct b43_wldev *dev)
{
u64 ret;
@@ -526,7 +526,7 @@ void b43_hf_write(struct b43_wldev *dev, u64 value)
b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_HOSTFHI, hi);
}
-void b43_tsf_read(struct b43_wldev *dev, u64 * tsf)
+void b43_tsf_read(struct b43_wldev *dev, u64 *tsf)
{
/* We need to be careful. As we read the TSF from multiple
* registers, we should take care of register overflows.
@@ -637,7 +637,7 @@ void b43_tsf_write(struct b43_wldev *dev, u64 tsf)
}
static
-void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 * mac)
+void b43_macfilter_set(struct b43_wldev *dev, u16 offset, const u8 *mac)
{
static const u8 zero_addr[ETH_ALEN] = { 0 };
u16 data;
@@ -827,7 +827,7 @@ void b43_dummy_transmission(struct b43_wldev *dev)
}
static void key_write(struct b43_wldev *dev,
- u8 index, u8 algorithm, const u8 * key)
+ u8 index, u8 algorithm, const u8 *key)
{
unsigned int i;
u32 offset;
@@ -849,7 +849,7 @@ static void key_write(struct b43_wldev *dev,
}
}
-static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr)
+static void keymac_write(struct b43_wldev *dev, u8 index, const u8 *addr)
{
u32 addrtmp[2] = { 0, 0, };
u8 per_sta_keys_start = 8;
@@ -899,7 +899,7 @@ static void keymac_write(struct b43_wldev *dev, u8 index, const u8 * addr)
static void do_key_write(struct b43_wldev *dev,
u8 index, u8 algorithm,
- const u8 * key, size_t key_len, const u8 * mac_addr)
+ const u8 *key, size_t key_len, const u8 *mac_addr)
{
u8 buf[B43_SEC_KEYSIZE] = { 0, };
u8 per_sta_keys_start = 8;
@@ -923,8 +923,8 @@ static void do_key_write(struct b43_wldev *dev,
static int b43_key_write(struct b43_wldev *dev,
int index, u8 algorithm,
- const u8 * key, size_t key_len,
- const u8 * mac_addr,
+ const u8 *key, size_t key_len,
+ const u8 *mac_addr,
struct ieee80211_key_conf *keyconf)
{
int i;
@@ -1324,7 +1324,7 @@ static void handle_irq_pmq(struct b43_wldev *dev)
}
static void b43_write_template_common(struct b43_wldev *dev,
- const u8 * data, u16 size,
+ const u8 *data, u16 size,
u16 ram_offset,
u16 shm_size_offset, u8 rate)
{
@@ -1514,9 +1514,9 @@ static void b43_write_probe_resp_plcp(struct b43_wldev *dev,
* 2) Patching duration field
* 3) Stripping TIM
*/
-static const u8 * b43_generate_probe_resp(struct b43_wldev *dev,
- u16 *dest_size,
- struct ieee80211_rate *rate)
+static const u8 *b43_generate_probe_resp(struct b43_wldev *dev,
+ u16 *dest_size,
+ struct ieee80211_rate *rate)
{
const u8 *src_data;
u8 *dest_data;
@@ -2946,7 +2946,7 @@ static void b43_security_init(struct b43_wldev *dev)
b43_clear_keys(dev);
}
-static int b43_rng_read(struct hwrng *rng, u32 * data)
+static int b43_rng_read(struct hwrng *rng, u32 *data)
{
struct b43_wl *wl = (struct b43_wl *)rng->priv;
unsigned long flags;
@@ -3240,7 +3240,7 @@ static void b43_put_phy_into_reset(struct b43_wldev *dev)
msleep(1);
}
-static const char * band_to_string(enum ieee80211_band band)
+static const char *band_to_string(enum ieee80211_band band)
{
switch (band) {
case IEEE80211_BAND_5GHZ:
diff --git a/drivers/net/wireless/b43/phy_g.c b/drivers/net/wireless/b43/phy_g.c
index caac4a4..f1cde96 100644
--- a/drivers/net/wireless/b43/phy_g.c
+++ b/drivers/net/wireless/b43/phy_g.c
@@ -823,7 +823,7 @@ static void b43_calc_nrssi_threshold(struct b43_wldev *dev)
* interference mitigation code.
* It is save to restore values in random order.
*/
-static void _stack_save(u32 * _stackptr, size_t * stackidx,
+static void _stack_save(u32 *_stackptr, size_t *stackidx,
u8 id, u16 offset, u16 value)
{
u32 *stackptr = &(_stackptr[*stackidx]);
@@ -837,7 +837,7 @@ static void _stack_save(u32 * _stackptr, size_t * stackidx,
B43_WARN_ON(*stackidx >= B43_INTERFSTACK_SIZE);
}
-static u16 _stack_restore(u32 * stackptr, u8 id, u16 offset)
+static u16 _stack_restore(u32 *stackptr, u8 id, u16 offset)
{
size_t i;
@@ -2565,8 +2565,8 @@ static s8 b43_tssi2dbm_entry(s8 entry[], u8 index,
return 0;
}
-u8 * b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev,
- s16 pab0, s16 pab1, s16 pab2)
+u8 *b43_generate_dyn_tssi2dbm_tab(struct b43_wldev *dev,
+ s16 pab0, s16 pab1, s16 pab2)
{
unsigned int i;
u8 *tab;
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 1036bef..8cd9776 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -55,8 +55,8 @@ static u16 generate_cookie(struct b43_pio_txqueue *q,
}
static
-struct b43_pio_txqueue * parse_cookie(struct b43_wldev *dev,
- u16 cookie,
+struct b43_pio_txqueue *parse_cookie(struct b43_wldev *dev,
+ u16 cookie,
struct b43_pio_txpacket **pack)
{
struct b43_pio *pio = &dev->pio;
@@ -134,8 +134,8 @@ static u16 pio_rxqueue_offset(struct b43_wldev *dev)
return 8;
}
-static struct b43_pio_txqueue * b43_setup_pioqueue_tx(struct b43_wldev *dev,
- unsigned int index)
+static struct b43_pio_txqueue *b43_setup_pioqueue_tx(struct b43_wldev *dev,
+ unsigned int index)
{
struct b43_pio_txqueue *q;
struct b43_pio_txpacket *p;
@@ -171,8 +171,8 @@ static struct b43_pio_txqueue * b43_setup_pioqueue_tx(struct b43_wldev *dev,
return q;
}
-static struct b43_pio_rxqueue * b43_setup_pioqueue_rx(struct b43_wldev *dev,
- unsigned int index)
+static struct b43_pio_rxqueue *b43_setup_pioqueue_rx(struct b43_wldev *dev,
+ unsigned int index)
{
struct b43_pio_rxqueue *q;
@@ -308,8 +308,8 @@ err_destroy_bk:
}
/* Static mapping of mac80211's queues (priorities) to b43 PIO queues. */
-static struct b43_pio_txqueue * select_queue_by_priority(struct b43_wldev *dev,
- u8 queue_prio)
+static struct b43_pio_txqueue *select_queue_by_priority(struct b43_wldev *dev,
+ u8 queue_prio)
{
struct b43_pio_txqueue *q;
diff --git a/drivers/net/wireless/b43/rfkill.c b/drivers/net/wireless/b43/rfkill.c
index 7137537..afad423 100644
--- a/drivers/net/wireless/b43/rfkill.c
+++ b/drivers/net/wireless/b43/rfkill.c
@@ -113,7 +113,7 @@ out_unlock:
return err;
}
-char * b43_rfkill_led_name(struct b43_wldev *dev)
+char *b43_rfkill_led_name(struct b43_wldev *dev)
{
struct b43_rfkill *rfk = &(dev->wl->rfkill);
reply other threads:[~2009-02-24 10:16 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49A3C90A.2000608@gmail.com \
--to=daikerjohn@gmail.com \
--cc=linux-wireless@vger.kernel.org \
--cc=mb@bu3sch.de \
--cc=stefano.brivio@polimi.it \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.