From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steve Brown Date: Wed, 25 Feb 2009 03:17:52 -0500 Subject: [ath9k-devel] AR9260 hang during connection to AP In-Reply-To: <18852.50526.324687.808475@gargle.gargle.HOWL> References: <18834.58107.765835.365791@gargle.gargle.HOWL> <18835.426.261949.207749@gargle.gargle.HOWL> <499ED76F.6070204@cortland.com> <18851.31428.305864.482898@gargle.gargle.HOWL> <49A3A71D.8080600@cortland.com> <18852.50526.324687.808475@gargle.gargle.HOWL> Message-ID: <49A4FEB0.3080101@cortland.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org Sujith wrote: > Steve Brown wrote: > >> hostapd.conf >> channel=6 >> ht_capab=[HT40-][SHORT-GI-40][DSSS_CCK-40] >> >> iw phy phy1 info >> Wiphy phy1 >> Band 1: >> HT capabilities: 0x104e >> * 20/40 MHz operation >> * SM PS disabled >> * 40 MHz short GI >> * max A-MSDU len 3839 >> * DSSS/CCK 40 MHz >> HT A-MPDU factor: 0x0003 (65535 bytes) >> HT A-MPDU density: 0x0006 (8 usec) >> HT MCS set: ff ff 00 00 00 00 00 00 00 00 00 00 01 00 00 00 >> >> > > Ah, are you using ath9k as the AP ? > Yes, I'm using the same card for the ap. Also, I have no problem w/ g connections. I moved to channel 11. hostapd is today's git. ath9k still has printk's instead of the assert. > Can you paste the hostapd log ? (hostapd -dd) > attached. > From your other mail, the chosen rate table is completely wrong, > am not sure if this is related to AP mode in ath9k. > > Sujith > Steve -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: ht.log Url: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090225/8837c2cc/attachment.txt