From mboxrd@z Thu Jan 1 00:00:00 1970 From: Michael Hampton Date: Tue, 03 Mar 2009 14:49:39 +0000 Subject: Re: [lm-sensors] W83667HG driver test for in6 and temp3 Message-Id: <49AD4383.2060809@ioerror.us> List-Id: References: <29CFBC9A3FDC81418F5FACEEC8970E0020AE12@ntshml01.nuvoton.com> In-Reply-To: <29CFBC9A3FDC81418F5FACEEC8970E0020AE12@ntshml01.nuvoton.com> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: lm-sensors@vger.kernel.org Jean Delvare wrote: > To all potential testers: I've split support for the W83667HG into 3 > patches: > > ftp://ftp.kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/hwmon-w83627ehf-01-invert-fan-pin-logic.patch > ftp://ftp.kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/hwmon-w83627ehf-02-add-support-for-w83667hg.patch > ftp://ftp.kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-hwmon/hwmon-w83627ehf-03-fix-temp3-vs-in6.patch > > These patches are now in linux-next and will be merged into kernel > 2.6.30 if we receive positive feedback. > > Any further change should be in a new patch to be applied on top of > these 3 patches we already have. > > Thanks, > I've applied these 3 patches against the latest Fedora 10 kernel 2.6.27.19-170.2.35.fc10.x86_64 and it's working, only I get temp3 (with an invalid value) instead of in6. The motherboard is an ASUS P6T6 WS Revolution. w83667hg-isa-0290 Adapter: ISA adapter in0: +1.34 V (min = +0.00 V, max = +1.74 V) in1: +1.70 V (min = +0.02 V, max = +0.00 V) ALARM in2: +3.22 V (min = +1.02 V, max = +0.26 V) ALARM in3: +3.18 V (min = +2.56 V, max = +0.00 V) ALARM in4: +1.69 V (min = +0.00 V, max = +1.04 V) ALARM in5: +2.04 V (min = +0.77 V, max = +0.52 V) ALARM in7: +3.34 V (min = +0.02 V, max = +1.34 V) ALARM in8: +3.31 V (min = +0.86 V, max = +1.09 V) ALARM fan1: 1917 RPM (min = 1288 RPM, div = 8) fan2: 1875 RPM (min = 14062 RPM, div = 16) ALARM fan3: 1795 RPM (min = 5273 RPM, div = 4) ALARM fan4: 1875 RPM (min = 1298 RPM, div = 8) fan5: 2481 RPM (min = 2636 RPM, div = 8) ALARM temp1: +43.0°C (high = +0.0°C, hyst = +4.0°C) ALARM sensor thermistor temp2: +60.5°C (high = +80.0°C, hyst = +75.0°C) sensor = diode temp3: +127.0°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor thermistor cpu0_vid: +1.950 V _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors