All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hartmut <spieluhr@ewetel.net>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Not able to view HD-TV via Technisat Skystar HD 2
Date: Thu, 05 Mar 2009 22:23:17 +0100	[thread overview]
Message-ID: <49B042C5.7000005@ewetel.net> (raw)

Hi,

since 3 days I have a Technisat Skystar HD 2 in my Computer (PCI-card).
OS is Opensuse 11.0 (kernel 2.6.25) without vdr but with Kaffeine as
frontend. I installed the multiproto-mantis driver and got the card
working, so I can watch dvb-s with Kaffeine. But: not dvb-s2! Perhaps I
got the wrong version of scan, but scan works (scan -a 1 -x 0 -t 1
/usr/share/dvb/dvb-s/Astra-19.2E > ~/.szap/channels.conf), but does not
find any s2-channels. I tried some versions of dvb-utils and patches,
but none were done by make and I have no clue, where to get the right
versions of both. I've read about some options which could be given to
the modules, but I don't know which and how, the card starts (only now
by hand) with modprobe mantis and both the STB-modules come up too.
(Attention: there ist a dvb-t-reciever too which makes adapter0, see lsmod))

/sbin/lspci
00:09.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)

/sbin/lspci -vv
00:09.0 Multimedia controller: Twinhan Technology Co. Ltd Mantis DTV PCI
Bridge Controller [Ver 1.0] (rev 01)
        Subsystem: Device 1ae4:0003
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort+ <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (2000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fb000000 (32-bit, prefetchable) [size=4K]
        Kernel driver in use: Mantis

/sbin/lsmod | grep dvb
dvb_pll                27656  1
dvb_usb_nova_t_usb2    25348  0
dvb_usb_dibusb_common    27780  1 dvb_usb_nova_t_usb2
dib3000mc              31368  2 dvb_usb_dibusb_common
dvb_usb                41228  2 dvb_usb_nova_t_usb2,dvb_usb_dibusb_common
dvb_core              117668  3 mantis_core,stv0299,dvb_usb
firmware_class         27776  1 dvb_usb
i2c_core               45344  18
mantis,mantis_core,tda665x,lnbp21,mb86a16,stb6100,tda10021,tda10023,zl10353,stb0899,stv0299,dvb_pll,mt2060,i2c_viapro,nvidia,dib3000mc,dibx000_common,dvb_usb
usbcore               188376  6
usb_storage,dvb_usb_nova_t_usb2,dvb_usb,ehci_hcd,uhci_hcd

dmesg
mantis stop feed and dma
stb6100_set_bandwidth: Bandwidth=61262500
stb6100_get_bandwidth: Bandwidth=62000000
stb6100_get_bandwidth: Bandwidth=62000000
stb6100_set_frequency: Frequency=1236000
stb6100_get_frequency: Frequency=1235988
stb6100_get_bandwidth: Bandwidth=62000000
mantis start feed & dma

What should I try?

Regards,

Spielmops-Hartmut


_______________________________________________
linux-dvb users mailing list
For V4L/DVB development, please use instead linux-media@vger.kernel.org
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2009-03-06  0:21 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-05 21:23 Hartmut [this message]
  -- strict thread matches above, loose matches on Subject: below --
2009-03-10 14:24 [linux-dvb] Not able to view HD-TV via Technisat Skystar HD 2 Hartmut
2009-03-10 14:36 ` Goga777
2009-03-10 15:34   ` Hartmut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49B042C5.7000005@ewetel.net \
    --to=spieluhr@ewetel.net \
    --cc=linux-dvb@linuxtv.org \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.