All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eddie Dawydiuk <eddie@embeddedarm.com>
To: Eddie Dawydiuk <eddie@embeddedarm.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH, RFC]
Date: Fri, 06 Mar 2009 15:32:31 -0700	[thread overview]
Message-ID: <49B1A47F.8040005@embeddedarm.com> (raw)
In-Reply-To: <49B19AE0.3080609@embeddedarm.com>

Hello,

Let's try this one more time. The last patch was using the clocks for a custom 
board based on the Yosemite board and was referencing a non-existent ethNadr( I 
forgot to pull out this code out).

Signed-off-by: Eddie Dawydiuk <eddie@embeddedarm.com>

diff -urN linux-2.6.28.orig/arch/powerpc/boot/simpleboot-yosemite.c 
linux-2.6.28/arch/powerpc/boot/simpleboot-yosemite.c
--- linux-2.6.28.orig/arch/powerpc/boot/simpleboot-yosemite.c   1969-12-31 
17:00:00.000000000 -0700
+++ linux-2.6.28/arch/powerpc/boot/simpleboot-yosemite.c        2009-03-06 
15:33:24.000000000 -0700
@@ -0,0 +1,23 @@
+#include "ops.h"
+#include "stdio.h"
+#include "4xx.h"
+#include "44x.h"
+
+#define TARGET_4xx
+#define TARGET_44x
+#include "ppcboot.h"
+
+static void yosemite_fixups(void)
+{
+       unsigned long sysclk = 66666666;
+
+       ibm440ep_fixup_clocks(sysclk, 11059200, 50000000);
+       ibm4xx_sdram_fixup_memsize();
+}
+
+void platform_specific_init(void)
+{
+       platform_ops.fixups = yosemite_fixups;
+       platform_ops.exit = ibm44x_dbcr_reset;
+}

> diff -urN linux-2.6.28.orig/arch/powerpc/boot/simpleboot-yosemite.c 
> linux-2.6.28/arch/powerpc/boot/simpleboot-yosemite.c
> --- linux-2.6.28.orig/arch/powerpc/boot/simpleboot-yosemite.c   
> 1969-12-31 17:00:00.000000000 -0700
> +++ linux-2.6.28/arch/powerpc/boot/simpleboot-yosemite.c        
> 2009-03-06 14:55:46.000000000 -0700
> @@ -0,0 +1,24 @@
> +#include "ops.h"
> +#include "stdio.h"
> +#include "4xx.h"
> +#include "44x.h"
> +
> +#define TARGET_4xx
> +#define TARGET_44x
> +#include "ppcboot.h"
> +
> +static void yosemite_fixups(void)
> +{
> +       unsigned long sysclk = 50000000;
> +
> +       ibm440ep_fixup_clocks(sysclk, 11059200, 400000000);
> +       ibm4xx_sdram_fixup_memsize();
> +       dt_fixup_mac_address_by_alias("ethernet0", eth0adr);
> +       dt_fixup_mac_address_by_alias("ethernet1", eth1adr);
> +}
> +
> +void platform_specific_init(void)
> +{
> +       platform_ops.fixups = yosemite_fixups;
> +       platform_ops.exit = ibm44x_dbcr_reset;
> +}
> 


-- 
Best Regards,
________________________________________________________________
  Eddie Dawydiuk, Technologic Systems | voice:  (480) 837-5200
  16525 East Laser Drive 	     | fax:    (480) 837-5300
  Fountain Hills, AZ 85268            | web: www.embeddedARM.com

  reply	other threads:[~2009-03-06 22:30 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-06 17:41 [PATCH, RFC] Eddie Dawydiuk
2009-03-06 18:40 ` Josh Boyer
2009-03-06 19:45   ` Grant Likely
2009-03-06 21:51   ` Eddie Dawydiuk
2009-03-06 22:32     ` Eddie Dawydiuk [this message]
2009-03-07  4:22       ` Grant Likely
2009-03-07  5:41         ` Grant Likely
2009-03-07 15:21           ` Eddie Dawydiuk
2009-03-07 16:04             ` Grant Likely
2009-03-07 15:14         ` Eddie Dawydiuk
2009-03-07 16:06           ` Grant Likely
2009-03-08 19:20           ` Sean MacLennan
  -- strict thread matches above, loose matches on Subject: below --
2009-03-07 16:37 Eddie Dawydiuk
2009-03-08  7:35 ` Grant Likely
2001-05-18 23:48 [PATCH][RFC] Vitaly Luban

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49B1A47F.8040005@embeddedarm.com \
    --to=eddie@embeddedarm.com \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.