All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: Kevin Hickey <khickey@rmicorp.com>
Cc: ralf@linux-mips.org, linux-mips@linux-mips.org
Subject: Re: [PATCH 06/10] Alchemy: Au1300 USB support
Date: Sat, 07 Mar 2009 13:01:21 +0300	[thread overview]
Message-ID: <49B245F1.2090200@ru.mvista.com> (raw)
In-Reply-To: <7e632686ab9b29a94eefeb2e5dca8b091a956b95.1236354153.git.khickey@rmicorp.com>

Hello.

Kevin Hickey wrote:

> Adds support for USB 2.0 on the Au1300 SOC.
>
> Signed-off-by: Kevin Hickey <khickey@rmicorp.com>
>   
[...]
> diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
> index 83babb0..a50d053 100644
> --- a/drivers/usb/Kconfig
> +++ b/drivers/usb/Kconfig
> @@ -55,6 +55,7 @@ config USB_ARCH_HAS_EHCI
>  	boolean
>  	default y if PPC_83xx
>  	default y if SOC_AU1200
> +	default y if SOC_AU13XX
>   

   Why not:

default y if SOC_AU1200 || SOC_AU13XX


> diff --git a/drivers/usb/host/ehci-au13xx.c b/drivers/usb/host/ehci-au13xx.c
> new file mode 100644
> index 0000000..fe03667
> --- /dev/null
> +++ b/drivers/usb/host/ehci-au13xx.c
> @@ -0,0 +1,213 @@
> +/*
> + * Copyright 2008 RMI Corporation
> + * Author: Kevin Hickey <khickey@rmicorp.com>
> + *
> + *  This program is free software; you can redistribute  it and/or modify it
> + *  under  the terms of  the GNU General  Public License as published by the
> + *  Free Software Foundation;  either version 2 of the  License, or (at your
> + *  option) any later version.
> + *
> + *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
> + *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
> + *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
> + *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
> + *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> + *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
> + *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
> + *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
> + *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
> + *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + *
> + *  You should have received a copy of the  GNU General Public License along
> + *  with this program; if not, write  to the Free Software Foundation, Inc.,
> + *  675 Mass Ave, Cambridge, MA 02139, USA.
> + *
> + *  Based on ehci-au1xxx.c.
> + */
> +
> +#include <linux/platform_device.h>
> +#include <asm/mach-au1x00/au1000.h>
> +
> +
> +extern int usb_disabled(void);
> +
> +static void au13xx_start_ehc(void)
> +{
> +	AU13XX_USB* au13xx_usb = (AU13XX_USB*)(KSEG1 | USB_BASE_PHYS_ADDR);
>   

    Your coding style is not acceptable -- run your patched thru 
scruipts/checkpatch.pl please.

> +	/*
> +	 * Enable clocks.
> +	 */
> +	AU_SET_BITS_32(USB_DWC_CTRL3_EHC_CLKEN, &au13xx_usb->dwc_ctrl3);
> +
> +	/*
> +	 * Take the host controller block out of reset
> +	 */
> +	AU_SET_BITS_32(USB_DWC_CTRL1_HSTRS, &au13xx_usb->dwc_ctrl1);
> +
> +	/*
> +	 * Enable all of the PHYs
> +	 */
> +	AU_SET_BITS_32(USB_DWC_CTRL2_PHYRS | USB_DWC_CTRL2_PHY0RS | USB_DWC_CTRL2_PH1RS,
> +		       &au13xx_usb->dwc_ctrl2);
> +
> +	/*
> +	 * Enable interrupts
> +	 */
> +	AU_SET_BITS_32(USB_INTR_EHCI, &au13xx_usb->intr_enable);
> +
> +	/*
> +	 * This bit enables coherent DMA.
> +	 */
> +	AU_SET_BITS_32(USB_SBUS_CTRL_SBCA, &au13xx_usb->sbus_ctrl);
> +	asm("sync");
>   

    Don't we have au_sync()?

> +static int ehci_hcd_au13xx_drv_probe(struct platform_device *pdev)
> +{
>   
[...]
> +	au13xx_start_ehc();
> +
> +	ehci = hcd_to_ehci(hcd);
> +	ehci->caps = hcd->regs;
> +	ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
> +	printk("ehci->regs = %p\n", ehci->regs);
>   

   printk() should have KERN_* facility.

> +static struct platform_driver ehci_hcd_au13xx_driver = {
> +	.probe		= ehci_hcd_au13xx_drv_probe,
> +	.remove		= ehci_hcd_au13xx_drv_remove,
> +	.shutdown	= usb_hcd_platform_shutdown,
> +	.suspend	= NULL,
> +	.resume		= NULL,
>   

   No dire need to explicitly initializer these two...

WBR, Sergei

  reply	other threads:[~2009-03-07 10:01 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-06 16:19 Alchemy: Support for RMI Alchemy Au1300 and DBAu1300 Kevin Hickey
2009-03-06 16:20 ` [PATCH 01/10] Initial Au1300 and DBAu1300 support Kevin Hickey
2009-03-06 16:20   ` [PATCH 02/10] Alchemy: Au1300 new interrupt controller Kevin Hickey
2009-03-07  9:49     ` Manuel Lauss
2009-03-07  9:49       ` Manuel Lauss
2009-03-07 19:20       ` Kevin Hickey
2009-03-08  8:49         ` Manuel Lauss
2009-03-06 16:20   ` [PATCH 03/10] Alchemy: Au1300/DB1300 UART support Kevin Hickey
2009-03-06 16:20   ` [PATCH 04/10] Alchemy: Au1300/DB1300 peripheral resource declarations Kevin Hickey
2009-03-06 16:20   ` [PATCH 05/10] Alchemy: Au1300/DB1300 MMC support Kevin Hickey
2009-03-06 16:20   ` [PATCH 06/10] Alchemy: Au1300 USB support Kevin Hickey
2009-03-07 10:01     ` Sergei Shtylyov [this message]
2009-03-07 19:11       ` Kevin Hickey
2009-03-06 16:20   ` [PATCH 07/10] Alchemy: SMSC 9210 Ethernet support Kevin Hickey
2009-03-07  9:35     ` Manuel Lauss
2009-03-07  9:35       ` Manuel Lauss
2009-03-07 19:06       ` Kevin Hickey
2009-03-06 16:20   ` [PATCH 08/10] Alchemy: DB1300 blink leds on timer tick Kevin Hickey
2009-03-07  9:37     ` Manuel Lauss
2009-03-07  9:37       ` Manuel Lauss
2009-03-07 19:04       ` Kevin Hickey
2009-03-08  8:37         ` Manuel Lauss
2009-03-08  8:54           ` Manuel Lauss
2009-03-06 16:20   ` [PATCH 09/10] Alchemy: Au1300: Add LCD framebuffer support Kevin Hickey
2009-03-06 16:20   ` [PATCH 10/10] Alchemy: DB1300 defconfig Kevin Hickey
2009-03-09 13:40   ` [PATCH 01/10] Initial Au1300 and DBAu1300 support Ralf Baechle

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49B245F1.2090200@ru.mvista.com \
    --to=sshtylyov@ru.mvista.com \
    --cc=khickey@rmicorp.com \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.