From: Tomasz Chmielewski <mangoo@wpkg.org>
To: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org
Subject: Re: Houston, we have May 15, 1953 (says guest when host uses cpufreq, and dies)
Date: Sat, 07 Mar 2009 15:59:07 +0100 [thread overview]
Message-ID: <49B28BBB.4010308@wpkg.org> (raw)
In-Reply-To: <20090218185734.GA26408@amt.cnet>
Marcelo Tosatti schrieb:
>> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
>> bogomips : 3993.20
>> TLB size : 1024 4K pages
>> clflush size : 64
>> cache_alignment : 64
>> address sizes : 40 bits physical, 48 bits virtual
>> power management: ts fid vid ttp tm stc
>
> kvm-84 as mentioned. Sorry.
>
It is not stable for me (although I did go through exactly the same routine with kvm-83) - I got an oops.
I'm not sure if the problem is kvm or cpufreq.
This is what I did:
- stopped all kvm-83 guests, removed all kvm-83 modules
- inserted kvm-83 modules, started 9 guests with kvm-84 binary
- inserted cpufreq modules and set the governor to ondemand
- cat /proc/cpuinfo revealed that CPUs are still running at full speed, so I did:
cat /sys/devices/system/cpu/cpu2/cpufreq/scaling_governor
but it didn't return and cat was in "D" state.
- I stopped all guests, removed kvm-84 modules, and got this oops:
Unable to handle kernel paging request at ffffffff88429721 RIP:
[<ffffffff88429721>]
PGD 203067 PUD 207063 PMD 1184dc067 PTE 0
Oops: 0010 [1] PREEMPT SMP
CPU: 0
Modules linked in: loop cpufreq_ondemand powernow_k8 freq_table crc32c libcrc32c vzethdev vznetdev simfs vzrst vzcpt tun vzdquota vzmon ipv6 vzdev xt_tcpudp xt_length ipt_ttl xt_tcpmss xt_TCPMSS iptable_mangle iptable_filter xt_multiport xt_limit ipt_tos ipt_REJECT ip_tables x_tables ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr iscsi_tcp libiscsi scsi_transport_iscsi bridge 8021q bonding dm_snapshot dm_mirror dm_multipath dm_mod joydev usbhid hid sata_svw pata_serverworks psmouse ehci_hcd ohci_hcd evdev thermal button ata_generic pata_acpi serio_raw i2c_piix4 tg3 container pcspkr libata usbcore processor i2c_core ssb shpchp pci_hotplug k8temp romfs isofs sd_mod sg mptsas mptscsih mptbase scsi_transport_sas scsi_mod raid1 md_mod
Pid: 20389, comm: kondemand/0 Not tainted 2.6.24-2-pve #1 ovz005
RIP: 0010:[<ffffffff88429721>] [<ffffffff88429721>]
RSP: 0018:ffff810039d09d20 EFLAGS: 00010202
RAX: 0000000000000001 RBX: 00000000ef41d1f5 RCX: ffffffff806cf690
RDX: 0000000000000000 RSI: ffff810080959000 RDI: ffffffff88450e80
RBP: 0000000000000000 R08: 00000000001e8480 R09: 0000000000000000
R10: ffff810001027ee0 R11: 0000000000000001 R12: ffffffff88450e90
R13: ffff810039d09df0 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f93a7d736d0(0000) GS:ffffffff8060b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffffff88429721 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process kondemand/0 (pid: 20389, veid=0, threadinfo ffff810039d08000, task ffff810039d06000)
Stack: 00000000ef41d1f5 0000000000000000 ffffffff88451950 ffff810039d09df0
0000000000000001 ffffffff804aa671 ffffffff8077b1f0 ffff810039d09df0
0000000000000000 00000000ffffffff ffffffff8077b1c0 ffffffff8025ca0a
Call Trace:
[<ffffffff804aa671>] notifier_call_chain+0x51/0x70
[<ffffffff8025ca0a>] __srcu_notifier_call_chain+0x5a/0x90
[<ffffffff8040897d>] cpufreq_notify_transition+0x7d/0xb0
[<ffffffff8846f9ef>] :powernow_k8:powernowk8_target+0x2bf/0x690
[<ffffffff8847671a>] :cpufreq_ondemand:do_dbs_timer+0x26a/0x300
[<ffffffff884764b0>] :cpufreq_ondemand:do_dbs_timer+0x0/0x300
[<ffffffff80252a38>] run_workqueue+0x88/0x120
[<ffffffff80253610>] worker_thread+0x0/0x130
[<ffffffff802536d5>] worker_thread+0xc5/0x130
[<ffffffff80257f70>] autoremove_wake_function+0x0/0x30
[<ffffffff80253610>] worker_thread+0x0/0x130
[<ffffffff80253610>] worker_thread+0x0/0x130
[<ffffffff80257b9b>] kthread+0x4b/0x80
[<ffffffff8020d338>] child_rip+0xa/0x12
[<ffffffff80257b50>] kthread+0x0/0x80
[<ffffffff8020d32e>] child_rip+0x0/0x12
Code: Bad RIP value.
RIP [<ffffffff88429721>]
RSP <ffff810039d09d20>
CR2: ffffffff88429721
---[ end trace e6b0e16fe814aeb1 ]---
note: kondemand/0[20389] exited with preempt_count 1
--
Tomasz Chmielewski
http://wpkg.org
prev parent reply other threads:[~2009-03-07 14:59 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-18 14:51 Houston, we have May 15, 1953 (says guest when host uses cpufreq, and dies) Tomasz Chmielewski
2009-02-18 16:02 ` Anthony Liguori
2009-02-18 16:11 ` Tomasz Chmielewski
2009-02-18 16:59 ` Avi Kivity
2009-02-18 17:02 ` Tomasz Chmielewski
2009-02-18 20:37 ` Anthony Liguori
2009-02-19 9:15 ` Gerd Hoffmann
2009-02-19 9:20 ` Tomasz Chmielewski
2009-02-19 10:27 ` Gerd Hoffmann
2009-02-18 18:46 ` Marcelo Tosatti
2009-02-18 18:53 ` Tomasz Chmielewski
2009-02-18 18:57 ` Marcelo Tosatti
2009-02-18 19:07 ` Tomasz Chmielewski
2009-02-18 19:10 ` Marcelo Tosatti
2009-02-18 19:18 ` Tomasz Chmielewski
2009-02-18 19:32 ` Marcelo Tosatti
2009-02-18 20:02 ` Tomasz Chmielewski
2009-02-18 20:03 ` Marcelo Tosatti
2009-02-19 14:43 ` Tomasz Chmielewski
2009-03-07 14:59 ` Tomasz Chmielewski [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49B28BBB.4010308@wpkg.org \
--to=mangoo@wpkg.org \
--cc=kvm@vger.kernel.org \
--cc=mtosatti@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.