From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from WARSL404PIP2.highway.telekom.at ([195.3.96.113]:2517 "EHLO email.aon.at" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1756414AbZCGWTP (ORCPT ); Sat, 7 Mar 2009 17:19:15 -0500 Message-ID: <49B2F2E1.3090206@yahoo.de> Date: Sat, 07 Mar 2009 23:19:13 +0100 From: Elmar Stellnberger MIME-Version: 1.0 To: Patrick Boettcher CC: Linux Media Mailing List Subject: Re: Technisat Skystar 2 on Suse Linux 11.1, kernel 2.6.27.19-3.2-default References: <49B2BAAE.8040808@yahoo.de> In-Reply-To: Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-media-owner@vger.kernel.org List-ID: > dvbscan -adapter 0 -frontend 0 -demux 0 /usr/share/dvb/dvb-s/Astra-19.2E Failed to set frontend downloading channel.conf from Astra1 has not brought me force. > szap 3sat reading channels from file '/home/elm/.szap/channels.conf' zapping to 20 '3sat': sat 0, frequency = 11954 MHz V, symbolrate 27500000, vpid = 0x00d2, apid = 0x00dc sid = 0x0000 using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' status 00 | signal 0000 | snr 6b2b | ber 00000000 | unc fffffffe | status 00 | signal 0000 | snr 7f02 | ber 00007e00 | unc fffffffe | status 01 | signal aa7e | snr 3d47 | ber 0000ffe8 | unc fffffffe | status 00 | signal 0000 | snr 7fc5 | ber 0000fff0 | unc fffffffe | status 00 | signal 0000 | snr 2232 | ber 00006ef0 | unc fffffffe | status 00 | signal 0000 | snr 1fdd | ber 00000058 | unc fffffffe | status 00 | signal 0000 | snr 19b3 | ber 00000000 | unc fffffffe | status 02 | signal 0000 | snr 192f | ber 00000000 | unc fffffffe | status 00 | signal 0035 | snr 8469 | ber 00000000 | unc fffffffe | ... etc. what should that output mean? why does szap not terminate? Patrick Boettcher schrieb: > Hi Elmar, > > On Sat, 7 Mar 2009, Elmar Stellnberger wrote: > >> Following the instructions at >> http://www.linuxtv.org/wiki/index.php/TechniSat_SkyStar_2_TV_PCI_/_Sky2PC_PCI >> >> I have tried to make my Technisat Skystar 2 work. > > This howto seems to be out of date. The skystar2.ko was removed like 4 > years ago. It was replaced by the b2c2-flexcop-drivers. > > >> The thing is that suse ships most of the required kernel modules out of >> the box; iter sunt >> stv0299 >> mt312 >> budget >> Only skystar2 is missing, so that I have no /dev/video0 and no >> /dev/dvb/adapter0/video0 as required by all these dvb players. >>>> ls /dev/dvb/adapter0/ >> demux0 dvr0 frontend0 net0 > > Furthermore this is totally correct. /dev/video0 is provided by > analog-video-cards or by full-featured (with a overlay-chip on board) > devices. > > The SkyStar2 is neither of it. > > Did you try to use Kaffeine or mplayer or (dvb)scan? > > regards, > Patrick. > > -- > Mail: patrick.boettcher@desy.de > WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/ >