Re: Automatically connect to ethernet

[Jan Pannecoeck <jpa@mgb-tech.com>]

Thanks for the ifplugd tip, I've tried to cross-compile it for the ARM 
I'm using but didn't succeeded yet... I'll try again later! :-)

Thanks,
Jan

Travis Stratman wrote:
> Jan,
>
> On Mon, 2009-03-09 at 11:32 +0100, Jan Pannecoeck wrote:
>   
>> So my problem is that linux does not connect to the DHCP server 
>> automatically when I plug in the ethernetcable. When I plug-in the cable 
>> before I launch the linux, this is working fine because at start-up the 
>> DHCP-server is asked for a new IP-lease. But when I don't plug-in the 
>> cable, and I plug it in when linux is already booted, the DHCP-server 
>> isn't contacted for a new IP-lease and I can't connect to the Internet. 
>> I can use the "/etc/init.d/networking restart" command but this isn't a 
>> solution of course because it should work all the time, also if I'm not 
>> there to enter that command...
>>
>> So, do I  have to change some settings in the kernel, or do I have to 
>> install some extra packages to get this working properly?
>>
>>     
>
> You should look at ifplugd. This will detect the network link beat and
> bring the interface up/down as required.
>
> TAS
>
>   
>> Thanks in advance,
>> Jan Pannecoeck
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>     
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
>