Re: [PATCH 2/3 v3] ide: add at91_ide driver

[Sergei Shtylyov <sshtylyov@ru.mvista.com>]

Stanislaw Gruszka wrote:

> This is IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory
> Controller with Compact Flash True IDE Mode logic.

> Driver have to switch 8/16 bit bus width when accessing Task Tile or Data
> Register. Moreover some extra things need to be done when setting PIO mode.
> Only PIO mode is used, hardware have no DMA support. If interrupt line is
> connected through GPIO extra quirk is needed to cope with fake interrupts.

> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>

    This is prolly only me, but I afil to compile this driver with the current 
arch/arm/configs/at91sam9263ek_defconfig:

   CC      drivers/ide/at91_ide.o
drivers/ide/at91_ide.c: In function ‘at91_ide_input_data’:
drivers/ide/at91_ide.c:159: error: implicit declaration of function 
‘__ide_mm_insw’
drivers/ide/at91_ide.c: In function ‘at91_ide_output_data’:
drivers/ide/at91_ide.c:174: error: implicit declaration of function 
‘__ide_mm_outsw’
drivers/ide/at91_ide.c: In function ‘at91_ide_tf_load’:
drivers/ide/at91_ide.c:192: error: ‘task’ undeclared (first use in this function)
drivers/ide/at91_ide.c:192: error: (Each undeclared identifier is reported only
once
drivers/ide/at91_ide.c:192: error: for each function it appears in.)
drivers/ide/at91_ide.c: At top level:
drivers/ide/at91_ide.c:303: warning: initialization from incompatible pointer type
drivers/ide/at91_ide.c:304: warning: initialization from incompatible pointer type
make[1]: *** [drivers/ide/at91_ide.o] Error 1
make: *** [drivers/ide/] Error 2

MBR, Sergei