From mboxrd@z Thu Jan  1 00:00:00 1970
From: Felix Radensky <felix@embedded-sol.com>
Date: Wed, 11 Mar 2009 16:42:06 +0200
Subject: [U-Boot] PCI-E problems on Kilauea board
In-Reply-To: <200903111505.56458.sr@denx.de>
References: <499997E2.10303@embedded-sol.com> <200903111322.50949.sr@denx.de>
	<49B7BF33.5000403@embedded-sol.com> <200903111505.56458.sr@denx.de>
Message-ID: <49B7CDBE.2040101@embedded-sol.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Stefan Roese wrote:
> On Wednesday 11 March 2009, Felix Radensky wrote:
>   
>>> The PCIe device used here is the Intel PRO/1000 PT Desktop card.
>>>
>>> Which Kilauea board revision are you using? And do you see the same
>>> problems with other PCIe cards as well?
>>>       
>> I use Kilauea revision 1.2 and exactly the same network card as you.
>>     
>
> I'm using the same board revision too.
>
>   
>> The problem is still here.
>>     
>
> Strange.
>
>   
>> It doesn't happen with other PCI-E card I have 
>> (10G Ethernet adapter).
>>
>> I have a feeling that 2 Kilauea boards of the same revision may sometimes
>> exhibit different behavior with the same version of u-boot.
>>     
>
> This could be the case. Do you have another Kilauea board?
>   

My customer has another board, which had issues with DDR2 autocalibration.

>   
>> For example, 
>> with u-boot 2008.10-rc2 that comes with AMCC CD, memory was properly
>> detected on one board in bootstrap option B but not detected on the
>> another. I had to recompile u-boot and disable autocalibration to make
>> things work on this board.
>>     
>
> This is a different issue. The DDR2 autocalibration had a bug. Because of this 
> some boards could boot just fine with autocalibration enabled and some not. 
> This bug should be fixed now. In the latest U-Boot version autocalibration is 
> enabled again for Kilauea and seems to work now. At least I didn't notice any 
> problems anymore. Please give it a try and let me know if this doesn't work 
> for you.
>
>   

I have tried latest u-boot on Kilauea and on custom board based on 405EXr
and autocalibration seems to work fine.

> But again, this is a different issue. Not sure how to help you with the PCIe 
> detection problem.
>   

I've used Kilauea as a testbed before the custom board arrived. On this 
board PCI-E
device is properly detected, so PCI-E detection on Kilauea is not 
critical to me now.
I appreciate your efforts and advice very much. In case you have some 
ideas I can
test them on my Kilauea.

Thank you very much for your help.

Felix.