From: Robert Hancock <hancockrwd@gmail.com>
To: Sagar Borikar <sagar.borikar@gmail.com>
Cc: linux-ide@vger.kernel.org, Tejun Heo <htejun@gmail.com>
Subject: Re: segate drives are not getting detected in SIL3114 and promise card
Date: Wed, 11 Mar 2009 22:32:41 -0600 [thread overview]
Message-ID: <49B89069.9040001@gmail.com> (raw)
In-Reply-To: <3fb94e50903112046t24a480a6lcd49a771c706f555@mail.gmail.com>
Sagar Borikar wrote:
> Hi,
>
> We have found that some 1TB (ST31000340AS model) and 750GB hard drives
> are not getting detected after reboot of NAS system.
> If I remove and insert it again, sometimes it get detected. Overall,
> its stochastic behaviour of the detection. This happens only in case
> of seagate drives and that too with 1TB and 750GB.
>
(snip)
>
>
> Same issue is seen on silicon image 3114 with 4 drive controller.But
> surprisingly this is not observed on 3512, 2 bay controller.
> We are using 2.6.18 kernel and on MIPS architecture.
>
> Any pointers?
2.6.18 is pretty ancient at this point, can you try a newer kernel?
prev parent reply other threads:[~2009-03-12 4:32 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-12 3:46 segate drives are not getting detected in SIL3114 and promise card Sagar Borikar
2009-03-12 4:32 ` Robert Hancock [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49B89069.9040001@gmail.com \
--to=hancockrwd@gmail.com \
--cc=htejun@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=sagar.borikar@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.