From: Ang Way Chuang <wcang@nav6.org>
To: Grant Gardner <grant@lastweekend.com.au>
Cc: linux-media@vger.kernel.org
Subject: Re: No subsystem id (and therefore no cx88_dvb loaded) after reboot
Date: Wed, 18 Mar 2009 09:26:22 +0900 [thread overview]
Message-ID: <49C03FAE.9060009@nav6.org> (raw)
In-Reply-To: <e0f27036e7a5af1cc8e8a725b522593b@localhost>
I experience similar problem with HVR4000 Lite cards that we have in the
lab. The card can't tune after cold boot, but a reboot will fix the
problem. I will check whether it has the similar invalid subsystem id
problem.
Grant Gardner wrote:
>
>
> I'm looking for some pointers on debugging a problem with my DVICO
> FusionHDTV Hybrid DVB-T card.
>
> The device was working perfectly prior to a reconfiguration of my machine,
> kernel upgrade etc...
>
> Now, on a cold start everything seems to start smoothly but I can't tune
> channels.
>
> Then, after a reboot the device is not detected due to "invalid subsystem
> id". As below lspci reports no subsystem information at all.
>
> Comparing the lspci output seems to be around the "Region 0: Memory at
> ee000000 v de000000", but I'm not
> sure what this means, and whether fixing the reboot problem will fix the
> channel tuning problem.
>
> Running mythbuntu 8.10
> 2.6.27-11-generic #1 SMP Thu Jan 29 19:28:32 UTC 2009 x86_64 GNU/Linux
>
> lspci -vvnn after cold start
>
> 00:0a.0 Multimedia video controller [0400]: Conexant Systems, Inc.
> CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
> Subsystem: DViCO Corporation Device [18ac:db40]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: [44] Vital Product Data <?>
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: cx8800
> Kernel modules: cx8800
>
> 00:0a.1 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3
> PCI Video and Audio Decoder [Audio Port] [14f1:8811] (rev 05)
> Subsystem: DViCO Corporation Device [18ac:db40]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 11
> Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel modules: cx88-alsa
>
> 00:0a.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3
> PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
> Subsystem: DViCO Corporation Device [18ac:db40]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
> <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at e0000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: cx88-mpeg driver manager
> Kernel modules: cx8802
>
>
> lspci -vvnn after warm reboot
>
> 00:0a.0 Multimedia video controller [0400]: Conexant Systems, Inc.
> CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at ee000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: [44] Vital Product Data <?>
> Capabilities: [4c] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: cx8800
> Kernel modules: cx8800
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
next prev parent reply other threads:[~2009-03-18 0:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-17 11:59 No subsystem id (and therefore no cx88_dvb loaded) after reboot Grant Gardner
2009-03-18 0:26 ` Ang Way Chuang [this message]
2009-03-18 7:59 ` Ang Way Chuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49C03FAE.9060009@nav6.org \
--to=wcang@nav6.org \
--cc=grant@lastweekend.com.au \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.