From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ingo Molnar <mingo@elte.hu>,
linux-pci@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] x86/pci: host mmconfig detect clean up v3 - resend
Date: Thu, 19 Mar 2009 20:55:35 -0700 [thread overview]
Message-ID: <49C313B7.9060704@kernel.org> (raw)
In-Reply-To: <20090319193218.445ce0ca@hobbes.lan>
Impact: not assume one place for mmconfig in nb
prepare for following case: amd fam10h + mcp55
CPU MSR has some range, mcp55 pci config will have another one.
also prepare for mcp55 + io55 system. every one will have one range.
if it s mcp55 detect duties to execlude range that is used by CPU MSR
aka, if CPU state bus 0-255, range in mcp55 need to be dropped.
because HW in CPU will not route that mcp55 mmconfig to handle it.
v2: fix e7520 exit path
v3: make it could support
PCI MMCONFIG 0 [00-3f]
PCI MMCONFIG 0 [40-7f]
PCI MMCONFIG 0 [80-ff]
Signed-off-by: Yinghai Lu <yinghai.lu@kernel.org>
---
arch/x86/pci/mmconfig-shared.c | 161 +++++++++++++++++++++++++++--------------
arch/x86/pci/mmconfig_64.c | 15 ++-
2 files changed, 118 insertions(+), 58 deletions(-)
Index: linux-2.6/arch/x86/pci/mmconfig-shared.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c
+++ linux-2.6/arch/x86/pci/mmconfig-shared.c
@@ -14,6 +14,7 @@
#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/bitmap.h>
+#include <linux/sort.h>
#include <asm/e820.h>
#include <asm/pci_x86.h>
@@ -24,24 +25,49 @@
/* Indicate if the mmcfg resources have been placed into the resource table. */
static int __initdata pci_mmcfg_resources_inserted;
+static __init int extend_mmcfg(int num)
+{
+ struct acpi_mcfg_allocation *new;
+ int new_num = pci_mmcfg_config_num + num;
+
+ new = kzalloc(sizeof(pci_mmcfg_config[0]) * new_num, GFP_KERNEL);
+ if (!new)
+ return -1;
+
+ if (pci_mmcfg_config) {
+ memcpy(new, pci_mmcfg_config,
+ sizeof(pci_mmcfg_config[0]) * new_num);
+ kfree(pci_mmcfg_config);
+ }
+ pci_mmcfg_config = new;
+
+ return 0;
+}
+
+static __init void fill_one_mmcfg(u64 addr, int segment, int start, int end)
+{
+ int i = pci_mmcfg_config_num;
+
+ pci_mmcfg_config_num++;
+ pci_mmcfg_config[i].address = addr;
+ pci_mmcfg_config[i].pci_segment = segment;
+ pci_mmcfg_config[i].start_bus_number = start;
+ pci_mmcfg_config[i].end_bus_number = end;
+}
+
static const char __init *pci_mmcfg_e7520(void)
{
u32 win;
raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0xce, 2, &win);
win = win & 0xf000;
- if(win == 0x0000 || win == 0xf000)
- pci_mmcfg_config_num = 0;
- else {
- pci_mmcfg_config_num = 1;
- pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
- if (!pci_mmcfg_config)
- return NULL;
- pci_mmcfg_config[0].address = win << 16;
- pci_mmcfg_config[0].pci_segment = 0;
- pci_mmcfg_config[0].start_bus_number = 0;
- pci_mmcfg_config[0].end_bus_number = 255;
- }
+ if (win == 0x0000 || win == 0xf000)
+ return NULL;
+
+ if (extend_mmcfg(1) == -1)
+ return NULL;
+
+ fill_one_mmcfg(win << 16, 0, 0, 255);
return "Intel Corporation E7520 Memory Controller Hub";
}
@@ -50,13 +76,11 @@ static const char __init *pci_mmcfg_inte
{
u32 pciexbar, mask = 0, len = 0;
- pci_mmcfg_config_num = 1;
-
raw_pci_ops->read(0, 0, PCI_DEVFN(0, 0), 0x48, 4, &pciexbar);
/* Enable bit */
if (!(pciexbar & 1))
- pci_mmcfg_config_num = 0;
+ return NULL;
/* Size bits */
switch ((pciexbar >> 1) & 3) {
@@ -73,28 +97,23 @@ static const char __init *pci_mmcfg_inte
len = 0x04000000U;
break;
default:
- pci_mmcfg_config_num = 0;
+ return NULL;
}
/* Errata #2, things break when not aligned on a 256Mb boundary */
/* Can only happen in 64M/128M mode */
if ((pciexbar & mask) & 0x0fffffffU)
- pci_mmcfg_config_num = 0;
+ return NULL;
/* Don't hit the APIC registers and their friends */
if ((pciexbar & mask) >= 0xf0000000U)
- pci_mmcfg_config_num = 0;
+ return NULL;
- if (pci_mmcfg_config_num) {
- pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]), GFP_KERNEL);
- if (!pci_mmcfg_config)
- return NULL;
- pci_mmcfg_config[0].address = pciexbar & mask;
- pci_mmcfg_config[0].pci_segment = 0;
- pci_mmcfg_config[0].start_bus_number = 0;
- pci_mmcfg_config[0].end_bus_number = (len >> 20) - 1;
- }
+ if (extend_mmcfg(1) == -1)
+ return NULL;
+
+ fill_one_mmcfg(pciexbar & mask, 0, 0, (len >> 20) - 1);
return "Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub";
}
@@ -138,18 +157,11 @@ static const char __init *pci_mmcfg_amd_
busnbits = 8;
}
- pci_mmcfg_config_num = (1 << segnbits);
- pci_mmcfg_config = kzalloc(sizeof(pci_mmcfg_config[0]) *
- pci_mmcfg_config_num, GFP_KERNEL);
- if (!pci_mmcfg_config)
+ if (extend_mmcfg(1 << segnbits) == -1)
return NULL;
- for (i = 0; i < (1 << segnbits); i++) {
- pci_mmcfg_config[i].address = base + (1<<28) * i;
- pci_mmcfg_config[i].pci_segment = i;
- pci_mmcfg_config[i].start_bus_number = 0;
- pci_mmcfg_config[i].end_bus_number = (1 << busnbits) - 1;
- }
+ for (i = 0; i < (1 << segnbits); i++)
+ fill_one_mmcfg(base + (1<<28) * i, i, 0, (1 << busnbits) - 1);
return "AMD Family 10h NB";
}
@@ -173,6 +185,48 @@ static struct pci_mmcfg_hostbridge_probe
0x1200, pci_mmcfg_amd_fam10h },
};
+static int __init cmp_mmcfg(const void *x1, const void *x2)
+{
+ const typeof(pci_mmcfg_config[0]) *m1 = x1;
+ const typeof(pci_mmcfg_config[0]) *m2 = x2;
+ int start1, start2;
+
+ start1 = m1->start_bus_number;
+ start2 = m2->start_bus_number;
+
+ return start1 - start2;
+}
+
+static void __init pci_mmcfg_check_end_bus_number(void)
+{
+ int i;
+ typeof(pci_mmcfg_config[0]) *cfg, *cfgx;
+
+ /* sort them at first */
+ sort(pci_mmcfg_config, pci_mmcfg_config_num,
+ sizeof(pci_mmcfg_config[0]), cmp_mmcfg, NULL);
+
+ /* last one*/
+ if (pci_mmcfg_config_num > 0) {
+ i = pci_mmcfg_config_num - 1;
+ cfg = &pci_mmcfg_config[i];
+ if (cfg->end_bus_number < cfg->start_bus_number)
+ cfg->end_bus_number = 255;
+ }
+
+ /* don't overlap please */
+ for (i = 0; i < pci_mmcfg_config_num - 1; i++) {
+ cfg = &pci_mmcfg_config[i];
+ cfgx = &pci_mmcfg_config[i+1];
+
+ if (cfg->end_bus_number < cfg->start_bus_number)
+ cfg->end_bus_number = 255;
+
+ if (cfg->end_bus_number >= cfgx->start_bus_number)
+ cfg->end_bus_number = cfgx->start_bus_number - 1;
+ }
+}
+
static int __init pci_mmcfg_check_hostbridge(void)
{
u32 l;
@@ -186,31 +240,33 @@ static int __init pci_mmcfg_check_hostbr
pci_mmcfg_config_num = 0;
pci_mmcfg_config = NULL;
- name = NULL;
- for (i = 0; !name && i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
+ for (i = 0; i < ARRAY_SIZE(pci_mmcfg_probes); i++) {
bus = pci_mmcfg_probes[i].bus;
devfn = pci_mmcfg_probes[i].devfn;
raw_pci_ops->read(0, bus, devfn, 0, 4, &l);
vendor = l & 0xffff;
device = (l >> 16) & 0xffff;
+ name = NULL;
if (pci_mmcfg_probes[i].vendor == vendor &&
pci_mmcfg_probes[i].device == device)
name = pci_mmcfg_probes[i].probe();
- }
- if (name) {
- printk(KERN_INFO "PCI: Found %s %s MMCONFIG support.\n",
- name, pci_mmcfg_config_num ? "with" : "without");
+ if (name)
+ printk(KERN_INFO "PCI: Found %s with MMCONFIG support.\n",
+ name);
}
- return name != NULL;
+ /* some end_bus_number is crazy, fix it */
+ pci_mmcfg_check_end_bus_number();
+
+ return pci_mmcfg_config_num != 0;
}
static void __init pci_mmcfg_insert_resources(void)
{
-#define PCI_MMCFG_RESOURCE_NAME_LEN 19
+#define PCI_MMCFG_RESOURCE_NAME_LEN 24
int i;
struct resource *res;
char *names;
@@ -228,9 +284,10 @@ static void __init pci_mmcfg_insert_reso
struct acpi_mcfg_allocation *cfg = &pci_mmcfg_config[i];
num_buses = cfg->end_bus_number - cfg->start_bus_number + 1;
res->name = names;
- snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u",
- cfg->pci_segment);
- res->start = cfg->address;
+ snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN,
+ "PCI MMCONFIG %u [%02x-%02x]", cfg->pci_segment,
+ cfg->start_bus_number, cfg->end_bus_number);
+ res->start = cfg->address + (cfg->start_bus_number << 20);
res->end = res->start + (num_buses << 20) - 1;
res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
insert_resource(&iomem_resource, res);
@@ -354,8 +411,6 @@ static void __init pci_mmcfg_reject_brok
(pci_mmcfg_config[0].address == 0))
return;
- cfg = &pci_mmcfg_config[0];
-
for (i = 0; i < pci_mmcfg_config_num; i++) {
int valid = 0;
u64 addr, size;
@@ -423,10 +478,10 @@ static void __init __pci_mmcfg_init(int
known_bridge = 1;
}
- if (!known_bridge) {
+ if (!known_bridge)
acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
- pci_mmcfg_reject_broken(early);
- }
+
+ pci_mmcfg_reject_broken(early);
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
Index: linux-2.6/arch/x86/pci/mmconfig_64.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/mmconfig_64.c
+++ linux-2.6/arch/x86/pci/mmconfig_64.c
@@ -112,13 +112,18 @@ static struct pci_raw_ops pci_mmcfg = {
static void __iomem * __init mcfg_ioremap(struct acpi_mcfg_allocation *cfg)
{
void __iomem *addr;
- u32 size;
+ u64 start, size;
- size = (cfg->end_bus_number + 1) << 20;
- addr = ioremap_nocache(cfg->address, size);
+ start = cfg->start_bus_number;
+ start <<= 20;
+ start += cfg->address;
+ size = cfg->end_bus_number + 1 - cfg->start_bus_number;
+ size <<= 20;
+ addr = ioremap_nocache(start, size);
if (addr) {
printk(KERN_INFO "PCI: Using MMCONFIG at %Lx - %Lx\n",
- cfg->address, cfg->address + size - 1);
+ start, start + size - 1);
+ addr -= cfg->start_bus_number << 20;
}
return addr;
}
@@ -157,7 +162,7 @@ void __init pci_mmcfg_arch_free(void)
for (i = 0; i < pci_mmcfg_config_num; ++i) {
if (pci_mmcfg_virt[i].virt) {
- iounmap(pci_mmcfg_virt[i].virt);
+ iounmap(pci_mmcfg_virt[i].virt + (pci_mmcfg_virt[i].cfg->start_bus_number << 20));
pci_mmcfg_virt[i].virt = NULL;
pci_mmcfg_virt[i].cfg = NULL;
}
next parent reply other threads:[~2009-03-20 3:55 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20090205181505.GB5661@elte.hu>
[not found] ` <20090319193218.445ce0ca@hobbes.lan>
2009-03-20 3:55 ` Yinghai Lu [this message]
2009-03-20 18:40 ` [PATCH] x86/pci: host mmconfig detect clean up v3 - resend Jesse Barnes
2009-03-20 3:57 ` x86/pci: Detect mmconfig on nVidia MCP55 -v2 " Yinghai Lu
2009-03-20 18:41 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49C313B7.9060704@kernel.org \
--to=yinghai@kernel.org \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.