udevd receives SIGILL

[unsik Kim <donari75@gmail.com>]

Hello?

Recently I started to change development platform poky to oe, but I have some troubles.

machine : custom PXA270 board.
kernel : custom 2.6.29-rc8
oe git : 49c1a7699ac24c580449c13bc3dba425f1d2bb48 (almost current)
image : base-image (use as NFS-root)

udevd receives SIGILL signal.

I found current oe and poky use same source code for udev package (differences are scripts and build env.)
Here's some tries I did.
If I use udev package from poky in oe's base-image, boot well.
If I provide /etc/dev.tar and using oe's udev package also boot well.
If I change nothing(same as first boot), udevd receive SIGILL.

followings are gdb debug results:

Program received signal SIGILL, Illegal instruction.
0x00009a98 in sig_handler (signum=17) at udevd.c:818
818		write(signal_pipe[WRITE_END], "", 1);
(gdb) l 818
813				reload_config = 1;
814				break;
815		}
816	
817		/* write to pipe, which will wakeup select() in our mainloop */
818		write(signal_pipe[WRITE_END], "", 1);
819	}
820	
821	static void udev_done(int pid, int exitstatus)
822	{

and, debug output message (I use --debug --debug-trace option)
[555] get_ctrl_msg: udevd message (ENV) received, set 'STARTUP=1'
[555] msg_queue_insert: seq 372 queued, 'add' 'bus'
[565] pass_env_to_socket: passed -1 bytes to socket '@/org/kernel/udev/monitor',
[565] pass_env_to_socket: passed -1 bytes to socket '/org/kernel/udev/monitor',
[565] udev_event_run: seq 372 finished with 0

-- 
Regards,
unsik Kim